lkml.org 
[lkml]   [2007]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: megaraid.c, all kernel versions, problem with multi-luns
On Wed, 30 May 2007 20:09:44 -0300
"Reinaldo Carvalho" <reinaldow@gmail.com> wrote:

> Hi,

(cc's added) (CONFIG_SCSI_MULTI_LUN is set)

> I have a Dell PowerEdge Expandable RAID controller, with a hardware
> Raid-5 at Channel 01 running perfectly, and a nCipher Crypter at
> Channel 02.
>
> This controller doesn't correctly detect devices (e.g. nCipher
> Crypter) with multiples LUNs. Only one LUN is detected.
>
> At another controller (e.g. Adaptec 79xx) two LUNs were detect. I
> compiled 2.6.8, 2.6.18 and 2.6.21.3 to test megaraid driver and all
> failed detecting two LUNs.
>
> I think that this is a firmware problem, but i'd like have some opinions.
>
> I read some docs
> (http://www.suse.de/~garloff/linux/scsi-scan/scsi-scanning.html,
> http://www.ictp.trieste.it/~radionet/nuc1996/ref/howto-html/scsi-howto-2.html)
> and this problem doesn't seem to be simple.
>
> Best regards,
>
> More information with Dell PowerEdge Expandable RAID controller (LSI
> Logic MegaRaid):
>
> Attached devices:
> Host: scsi0 Channel: 00 Id: 06 Lun: 00
> Vendor: PE/PV Model: 1x5 SCSI BP Rev: 1.0
> Type: Processor ANSI SCSI revision: 02
> Host: scsi0 Channel: 01 Id: 00 Lun: 00
> Vendor: nCipher Model: Fastness Crypto Rev: 2*00
> Type: Processor ANSI SCSI revision: 02
> Host: scsi0 Channel: 02 Id: 00 Lun: 00
> Vendor: MegaRAID Model: LD 0 RAID5 279G Rev: 522A
> Type: Direct-Access ANSI SCSI revision: 02
>
>
> 14:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID controller
> 4 (rev 06)
> Subsystem: Dell PowerEdge Expandable RAID Controller 4e/Di
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping+ SERR+ FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (32000ns min), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at d7ff0000 (32-bit, prefetchable) [size=64K]
> Region 2: Memory at defc0000 (32-bit, non-prefetchable) [size=256K]
> Expansion ROM at df000000 [disabled] [size=128K]
> Capabilities: <access denied>
>
> 14:0e.0 0104: 1028:0013 (rev 06)
>
>
> Information with Adaptec 79xx or others SCSI controllers:
>
> Host: scsi0 Channel: 01 Id: 00 Lun: 00
> Vendor: nCipher Model: Fastness Crypto Rev: 2*00
> Type: Processor ANSI SCSI revision: 02
> Host: scsi0 Channel: 01 Id: 00 Lun: 01
> Vendor: nCipher Model: Fastness Crypto Rev: 2*00
> Type: Processor ANSI SCSI revision: 02
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-06-02 01:45    [W:0.048 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site