lkml.org 
[lkml]   [2007]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] leds:arch/sh/boards/landisk LEDs supports
From
Date
On Wed, 2007-05-09 at 23:26 +0900, kogiidena wrote:
> Hi Richard-san
>
> The following three points were corrected.
>
> 1.
> > You can't do this since the trigger will appear for all LEDs and it only
> > applies to a single LED. There has been previous discussion of LED
> > specific triggers and we'll need that support before you can make
> > something like this work. Nobody has sent me a patch for that yet and I
> > haven't had time to write one...
> The trigger name past "disk" was changed to the name "hard".
> This is to mean the hardware of LANDISK controls LED.
> The problem of "LED specific triggers" is solved.

No, its not solved.

Imagine I connect some device with its own LEDs and LED drivers. I'll
use "corgi:amber" as an example.

I run:

'cat /sys/class/leds/corgi:amber/triggers'

I see "hard" listed.

'echo "hard" > /sys/class/leds/corgi:amber/triggers'

doesn't work though...

If its not going to work, it shouldn't be listed.

Regards,

Richard


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-05-09 17:15    [W:1.759 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site