lkml.org 
[lkml]   [2007]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[rfc patch] firewire: prefix modules with firewire- instead of fw-
Of course everybody immediately associates "fw-" with FireWire, not
firmware or firewall or whatever. But "firewire-" has a nice ring to
it too.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---

So everybody, do you prefer the longer names?

Alas this RFC is a little bit late before release,
but perhaps not too late.


drivers/firewire/Kconfig | 14 +++++++-------
drivers/firewire/Makefile | 12 +++++++-----
2 files changed, 14 insertions(+), 12 deletions(-)

Index: linux/drivers/firewire/Kconfig
===================================================================
--- linux.orig/drivers/firewire/Kconfig
+++ linux/drivers/firewire/Kconfig
@@ -18,7 +18,7 @@ config FIREWIRE
your IEEE 1394 adapter.

To compile this driver as a module, say M here: the module will be
- called fw-core.
+ called firewire-core.

This is the "JUJU" FireWire stack, an alternative implementation
designed for robustness and simplicity. You can build either this
@@ -34,11 +34,11 @@ config FIREWIRE_OHCI
is the only chipset in use, so say Y here.

To compile this driver as a module, say M here: The module will be
- called fw-ohci.
+ called firewire-ohci.

If you also build ohci1394 of the classic IEEE 1394 driver stack,
- blacklist either ohci1394 or fw-ohci to let hotplug load the desired
- driver.
+ blacklist either ohci1394 or firewire-ohci to let hotplug load the
+ desired driver.

config FIREWIRE_SBP2
tristate "Support for storage devices (SBP-2 protocol driver)"
@@ -50,12 +50,12 @@ config FIREWIRE_SBP2
like scanners.

To compile this driver as a module, say M here: The module will be
- called fw-sbp2.
+ called firewire-sbp2.

You should also enable support for disks, CD-ROMs, etc. in the SCSI
configuration section.

If you also build sbp2 of the classic IEEE 1394 driver stack,
- blacklist either sbp2 or fw-sbp2 to let hotplug load the desired
- driver.
+ blacklist either sbp2 or firewire-sbp2 to let hotplug load the
+ desired driver.

Index: linux/drivers/firewire/Makefile
===================================================================
--- linux.orig/drivers/firewire/Makefile
+++ linux/drivers/firewire/Makefile
@@ -2,9 +2,11 @@
# Makefile for the Linux IEEE 1394 implementation
#

-fw-core-y += fw-card.o fw-topology.o fw-transaction.o fw-iso.o \
- fw-device.o fw-cdev.o
+firewire-core-y += fw-card.o fw-topology.o fw-transaction.o fw-iso.o \
+ fw-device.o fw-cdev.o
+firewire-ohci-y += fw-ohci.o
+firewire-sbp2-y += fw-sbp2.o

-obj-$(CONFIG_FIREWIRE) += fw-core.o
-obj-$(CONFIG_FIREWIRE_OHCI) += fw-ohci.o
-obj-$(CONFIG_FIREWIRE_SBP2) += fw-sbp2.o
+obj-$(CONFIG_FIREWIRE) += firewire-core.o
+obj-$(CONFIG_FIREWIRE_OHCI) += firewire-ohci.o
+obj-$(CONFIG_FIREWIRE_SBP2) += firewire-sbp2.o
--
Stefan Richter
-=====-=-=== -=-= ==--=
http://arcgraph.de/sr/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-05-25 13:57    [W:2.218 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site