lkml.org 
[lkml]   [2007]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC] enhancing the kernel's graphics subsystem
Date
On Tuesday, May 22, 2007, Jon Smirl wrote:
> I've talked to an ATI engineer about VBIOS initialization. The chips
> may have different steppings. They flash the right VBIOS that matches
> the chip into the ROM on the card. Given all the various steppings
> this is the only sane way to initialize the hardware. I don't believe
> generic initialization code that can handle all of the various
> steppings exists for any hardware.

I think you must have misunderstood. Last time I worked on ATI, there was
a single ROM image that supported several (maybe even all) of their addin
cards. There's nothing magical about them... But that's beside the
point.

They may have hardcoded information about how a particular board is wired
up--it's ok to use that (makes the DAC discovery much easier). We just
want to avoid relying on the VBIOS for DAC setup and output probing, since
we'll need to do that ourselves for suspend resume and to fully support
various multihead configurations.

Jesse
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-05-22 18:19    [W:0.436 / U:1.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site