Messages in this thread |  | | | Date | Mon, 21 May 2007 22:58:06 -0400 | | From | Mike Houston <> | | Subject | Re: Linux 2.6.22-rc2 |
| |
On Mon, 21 May 2007 10:37:55 -0700 Stephen Hemminger <shemminger@linux-foundation.org> wrote:
> On Mon, 21 May 2007 13:10:55 -0400 > Mike Houston <mikeserv@bmts.com> wrote: > > > On Mon, 21 May 2007 08:45:49 -0700 > > Stephen Hemminger <shemminger@linux-foundation.org> wrote: > > > > > It's almost certainly a problem with the BIOS and hardware (not > > > a sky2) driver issue. Since there are many similar boards and > > > configurations, I made the decision not to enforce restrictions > > > in the driver. > > > > >> May 20 15:57:48 cramit kernel: sky2 0000:04:00.0: v1.14 addr > > >> 0xf8000000 irq 16 Yukon-EC Ultra (0xb4) rev 2 > > > > Thank you for your answer. I was half wondering if that was the > > case after staring at those log messages several more times. I > > don't understand hardware at the low level but got thinking maybe > > interrupt routing issue. There's an Nvidia PCI Express card in > > there that gets IRQ 16, though it was not initialized by a driver > > at the time. (plain old VGA console after fresh cold boot... no > > framebuffer, no X, no nvidia module). I guess some things don't > > share well. > > > > It works well in that other OS that came with the hardware, but > > that's beside the point. > > It is some low level PCI Express related stuff, try latest BIOS (F9) > and if that doesn't help there is a EEPROM update from Gigabyte > for the Marvell hardware that might help.
Thanks for your suggestions, I followed through on them. It may still be interesting/useful to hear from me that it didn't help. The problem is the same.
My motherboard is a newer revision (Gigabyte GA-965P-DS3 Rev 3.3) and already had the "F10" bios version, but I flashed to the latest F11 version anyways. I also flashed with the EEPROM update from Gigabyte, from a FAQ entry for my motherboard revision. (faq_marvell_eeprom.zip). Both operations were successful. I cleared the CMOS and reconfigured after the bios flash too.
Incidently, it was showing IRQ 16 in that early initialization message, but actually getting a MSI interrupt (IRQ 219, PCI-MSI-edge)
I've disabled the onboard yukon2 adapter in bios and gone back to the PCI card now. I think we can consider the matter closed, since it's not a problem with the driver, but just so you know, I'm always willing to help test when it's hardware that I have.
Mike Houston - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |