lkml.org 
[lkml]   [2007]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 13/32] Blackfin arch: initial tepla-bf561 board support
    Date
    From: Mike Frysinger <michael.frysinger@analog.com>

    Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
    Signed-off-by: Bryan Wu <bryan.wu@analog.com>
    ---
    arch/blackfin/Kconfig | 8 +++-
    arch/blackfin/mach-bf561/boards/Makefile | 3 +-
    arch/blackfin/mach-bf561/boards/tepla.c | 61 ++++++++++++++++++++++++++++++
    3 files changed, 70 insertions(+), 2 deletions(-)
    create mode 100644 arch/blackfin/mach-bf561/boards/tepla.c

    diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
    index 35b33a4..b1b111b 100644
    --- a/arch/blackfin/Kconfig
    +++ b/arch/blackfin/Kconfig
    @@ -193,7 +193,7 @@ config BFIN537_BLUETECHNIX_CM
    CM-BF537 support for EVAL- and DEV-Board.

    config BFIN561_BLUETECHNIX_CM
    - bool "BF561-CM"
    + bool "Bluetechnix CM-BF561"
    depends on (BF561)
    help
    CM-BF561 support for EVAL- and DEV-Board.
    @@ -204,6 +204,12 @@ config BFIN561_EZKIT
    help
    BF561-EZKIT-LITE board Support.

    +config BFIN561_TEPLA
    + bool "BF561-TEPLA"
    + depends on (BF561)
    + help
    + BF561-TEPLA board Support.
    +
    config PNAV10
    bool "PNAV 1.0 board"
    depends on (BF537)
    diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile
    index 886edc7..495a1cf 100644
    --- a/arch/blackfin/mach-bf561/boards/Makefile
    +++ b/arch/blackfin/mach-bf561/boards/Makefile
    @@ -3,5 +3,6 @@
    #

    obj-$(CONFIG_GENERIC_BOARD) += generic_board.o
    -obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o
    obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o
    +obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o
    +obj-$(CONFIG_BFIN561_TEPLA) += tepla.o
    diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c
    new file mode 100644
    index 0000000..db308c7
    --- /dev/null
    +++ b/arch/blackfin/mach-bf561/boards/tepla.c
    @@ -0,0 +1,61 @@
    +/*
    + * File: arch/blackfin/mach-bf561/tepla.c
    + *
    + * Copyright 2004-2007 Analog Devices Inc.
    + * Only SMSC91C1111 was registered, may do more later.
    + *
    + * Copyright 2005 National ICT Australia (NICTA), Aidan Williams <aidan@nicta.com.au>
    + * Thanks to Jamey Hicks.
    + *
    + * This program is free software; you can redistribute it and/or modify
    + * it under the terms of the GNU General Public License version 2 as
    + * published by the Free Software Foundation.
    + */
    +
    +#include <linux/device.h>
    +#include <linux/platform_device.h>
    +#include <asm/irq.h>
    +
    +char *bfin_board_name = "Tepla-BF561";
    +
    +/*
    + * Driver needs to know address, irq and flag pin.
    + */
    +static struct resource smc91x_resources[] = {
    + {
    + .start = 0x2C000300,
    + .end = 0x2C000320,
    + .flags = IORESOURCE_MEM,
    + },{
    + .start = IRQ_PROG_INTB,
    + .end = IRQ_PROG_INTB,
    + .flags = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL,
    + },{
    + /*
    + * denotes the flag pin and is used directly if
    + * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
    + */
    + .start = IRQ_PF7,
    + .end = IRQ_PF7,
    + .flags = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL,
    + },
    +};
    +
    +static struct platform_device smc91x_device = {
    + .name = "smc91x",
    + .id = 0,
    + .num_resources = ARRAY_SIZE(smc91x_resources),
    + .resource = smc91x_resources,
    +};
    +
    +static struct platform_device *tepla_devices[] __initdata = {
    + &smc91x_device,
    +};
    +
    +static int __init tepla_init(void)
    +{
    + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
    + return platform_add_devices(tepla_devices, ARRAY_SIZE(tepla_devices));
    +}
    +
    +arch_initcall(tepla_init);
    --
    1.5.1.2
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/
    \
     
     \ /
      Last update: 2007-05-21 12:23    [W:0.035 / U:94.016 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site