lkml.org 
[lkml]   [2007]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 30/32] Blackfin serial driver: fix overhead issue
Date
From: Aubrey Li <aubrey.li@analog.com>

Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
---
drivers/serial/bfin_5xx.c | 28 +++++++++++++++++-----------
1 files changed, 17 insertions(+), 11 deletions(-)

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 408390f..a8271d9 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -240,24 +240,30 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
bfin_serial_stop_tx(&uart->port);
}

-static irqreturn_t bfin_serial_int(int irq, void *dev_id)
+static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id)
+{
+ struct bfin_serial_port *uart = dev_id;
+
+ spin_lock(&uart->port.lock);
+ while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_RX_READY)
+ bfin_serial_rx_chars(uart);
+ spin_unlock(&uart->port.lock);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
{
struct bfin_serial_port *uart = dev_id;
unsigned short status;

spin_lock(&uart->port.lock);
- status = UART_GET_IIR(uart);
- do {
- if ((status & IIR_STATUS) == IIR_TX_READY)
- bfin_serial_tx_chars(uart);
- if ((status & IIR_STATUS) == IIR_RX_READY)
- bfin_serial_rx_chars(uart);
- status = UART_GET_IIR(uart);
- } while (status & (IIR_TX_READY | IIR_RX_READY));
+ while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_TX_READY)
+ bfin_serial_tx_chars(uart);
spin_unlock(&uart->port.lock);
return IRQ_HANDLED;
}

+
static void bfin_serial_do_work(struct work_struct *work)
{
struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue);
@@ -545,14 +551,14 @@ static int bfin_serial_startup(struct uart_port *port)
add_timer(&(uart->rx_dma_timer));
#else
if (request_irq
- (uart->port.irq, bfin_serial_int, IRQF_DISABLED,
+ (uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,
"BFIN_UART_RX", uart)) {
printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");
return -EBUSY;
}

if (request_irq
- (uart->port.irq+1, bfin_serial_int, IRQF_DISABLED,
+ (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED,
"BFIN_UART_TX", uart)) {
printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n");
free_irq(uart->port.irq, uart);
--
1.5.1.2
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2007-05-21 12:17    [W:0.198 / U:2.432 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site