lkml.org 
[lkml]   [2007]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
Subject[BUG: 2.6.22-rc2] SLAB doesn't like usb_get_configuration()
From
Hello,

I had two SLAb related bugs, both with usb_get_configuration()
near the end of the backtrace. First one was with git between
rc1 and rc2, but very close to rc2, second one was with rc2,
both at bootup.

Oh, almost forgot: First one uses SLAB, second one SLUB.

[ 85.574686] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 85.709684] BUG: at /home/indan/src/git/linux-2.6/mm/slab.c:777 __find_genera
l_cachep()
[ 85.709693] [<b014be2f>] __kmalloc+0x3f/0xa0
[ 85.709709] [<b013d271>] __kzalloc+0xd/0x34
[ 85.709720] [<c09a9d78>] usb_get_configuration+0x93e/0xd26 [usbcore]
[ 85.709761] [<c09a7459>] usb_control_msg+0xbe/0xc8 [usbcore]
[ 85.709784] [<c09a856a>] usb_get_device_descriptor+0x72/0x7c [usbcore]
[ 85.709804] [<c09a3259>] hub_port_init+0x55d/0x567 [usbcore]
[ 85.709823] [<c09a3914>] usb_new_device+0x17/0xdd [usbcore]
[ 85.709841] [<c09a435f>] hub_thread+0x6cc/0xa4a [usbcore]
[ 85.709862] [<b0125dff>] autoremove_wake_function+0x0/0x35
[ 85.709871] [<c09a3c93>] hub_thread+0x0/0xa4a [usbcore]
[ 85.709888] [<b0125d47>] kthread+0x36/0x5b
[ 85.709893] [<b0125d11>] kthread+0x0/0x5b
[ 85.709898] [<b010476b>] kernel_thread_helper+0x7/0x10
[ 85.709907] =======================

and

[ 30.420891] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 30.555891] BUG: at /home/indan/src/git/linux-2.6/include/linux/slub_def.h:77 kmalloc_index()
[ 30.555901] [<b014d02c>] get_slab+0x43/0x214
[ 30.555913] [<c09acc18>] usb_get_configuration+0x923/0xd07 [usbcore]
[ 30.555951] [<b014e16a>] __kmalloc_track_caller+0xf/0x56
[ 30.555959] [<b013d2b1>] __kzalloc+0x11/0x38
[ 30.555971] [<c09acc18>] usb_get_configuration+0x923/0xd07 [usbcore]
[ 30.555991] [<c09aa34d>] usb_control_msg+0xbe/0xc8 [usbcore]
[ 30.556014] [<c09a6234>] hub_port_init+0x559/0x563 [usbcore]
[ 30.556033] [<c09a68d4>] usb_new_device+0x17/0xdd [usbcore]
[ 30.556052] [<c09a72da>] hub_thread+0x68f/0x9f8 [usbcore]
[ 30.556071] [<b027252f>] __sched_text_start+0x497/0x539
[ 30.556080] [<b0125e27>] autoremove_wake_function+0x0/0x35
[ 30.556089] [<c09a6c4b>] hub_thread+0x0/0x9f8 [usbcore]
[ 30.556107] [<b0125d6f>] kthread+0x36/0x5b
[ 30.556112] [<b0125d39>] kthread+0x0/0x5b
[ 30.556118] [<b010476b>] kernel_thread_helper+0x7/0x10
[ 30.556125] =======================

Both are triggered by WARN_ON_ONCE(size == 0),

Full dmesg outputs and config for second bug attached.

Greetings,

Indan
[unhandled content-type:application/octet-stream][unhandled content-type:application/octet-stream][unhandled content-type:application/octet-stream]
\
 
 \ /
  Last update: 2007-05-19 16:31    [W:0.114 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site