lkml.org 
[lkml]   [2007]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] 2.6.21-git15 - Kconfig Cleanup
ping?

On Fri, 11 May 2007 22:05:01 -0400
Matt LaPlante <kernel1@cyberdogtech.com> wrote:

> Fix misc small issues/typos/grammar in Kconfigs for 2.6.21-git15.
>
> Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
> --
>
> diff -ru a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
> --- a/arch/arm/plat-s3c24xx/Kconfig 2007-04-25 23:08:32.000000000 -0400
> +++ b/arch/arm/plat-s3c24xx/Kconfig 2007-05-11 21:44:06.000000000 -0400
> @@ -70,7 +70,7 @@
> help
> Set the chunksize in Kilobytes of the CRC for checking memory
> corruption over suspend and resume. A smaller value will mean that
> - the CRC data block will take more memory, but wil identify any
> + the CRC data block will take more memory, but will identify any
> faults with better precision.
>
> See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
> diff -ru a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
> --- a/arch/blackfin/Kconfig 2007-05-11 20:32:24.000000000 -0400
> +++ b/arch/blackfin/Kconfig 2007-05-11 21:33:28.000000000 -0400
> @@ -435,100 +435,100 @@
> default y
> help
> If enabled interrupt entry code (STORE/RESTORE CONTEXT) is linked
> - into L1 instruction memory.(less latency)
> + into L1 instruction memory. (less latency)
>
> config EXCPT_IRQ_SYSC_L1
> - bool "Locate entire ASM lowlevel excepetion / interrupt - Syscall and CPLB handler code in L1 Memory"
> + bool "Locate entire ASM lowlevel exception / interrupt - Syscall and CPLB handler code in L1 Memory"
> default y
> help
> - If enabled entire ASM lowlevel exception and interrupt entry code (STORE/RESTORE CONTEXT) is linked
> - into L1 instruction memory.(less latency)
> + If enabled, the entire ASM lowlevel exception and interrupt entry code
> + (STORE/RESTORE CONTEXT) is linked into L1 instruction memory. (less latency)
>
> config DO_IRQ_L1
> bool "Locate frequently called do_irq dispatcher function in L1 Memory"
> default y
> help
> - If enabled frequently called do_irq dispatcher function is linked
> - into L1 instruction memory.(less latency)
> + If enabled, the frequently called do_irq dispatcher function is linked
> + into L1 instruction memory. (less latency)
>
> config CORE_TIMER_IRQ_L1
> bool "Locate frequently called timer_interrupt() function in L1 Memory"
> default y
> help
> - If enabled frequently called timer_interrupt() function is linked
> - into L1 instruction memory.(less latency)
> + If enabled, the frequently called timer_interrupt() function is linked
> + into L1 instruction memory. (less latency)
>
> config IDLE_L1
> bool "Locate frequently idle function in L1 Memory"
> default y
> help
> - If enabled frequently called idle function is linked
> - into L1 instruction memory.(less latency)
> + If enabled, the frequently called idle function is linked
> + into L1 instruction memory. (less latency)
>
> config SCHEDULE_L1
> bool "Locate kernel schedule function in L1 Memory"
> default y
> help
> - If enabled frequently called kernel schedule is linked
> - into L1 instruction memory.(less latency)
> + If enabled, the frequently called kernel schedule is linked
> + into L1 instruction memory. (less latency)
>
> config ARITHMETIC_OPS_L1
> bool "Locate kernel owned arithmetic functions in L1 Memory"
> default y
> help
> If enabled arithmetic functions are linked
> - into L1 instruction memory.(less latency)
> + into L1 instruction memory. (less latency)
>
> config ACCESS_OK_L1
> bool "Locate access_ok function in L1 Memory"
> default y
> help
> - If enabled access_ok function is linked
> - into L1 instruction memory.(less latency)
> + If enabled, the access_ok function is linked
> + into L1 instruction memory. (less latency)
>
> config MEMSET_L1
> bool "Locate memset function in L1 Memory"
> default y
> help
> - If enabled memset function is linked
> - into L1 instruction memory.(less latency)
> + If enabled, the memset function is linked
> + into L1 instruction memory. (less latency)
>
> config MEMCPY_L1
> bool "Locate memcpy function in L1 Memory"
> default y
> help
> - If enabled memcpy function is linked
> - into L1 instruction memory.(less latency)
> + If enabled, the memcpy function is linked
> + into L1 instruction memory. (less latency)
>
> config SYS_BFIN_SPINLOCK_L1
> bool "Locate sys_bfin_spinlock function in L1 Memory"
> default y
> help
> - If enabled sys_bfin_spinlock function is linked
> - into L1 instruction memory.(less latency)
> + If enabled, the sys_bfin_spinlock function is linked
> + into L1 instruction memory. (less latency)
>
> config IP_CHECKSUM_L1
> bool "Locate IP Checksum function in L1 Memory"
> default n
> help
> - If enabled IP Checksum function is linked
> - into L1 instruction memory.(less latency)
> + If enabled, the IP Checksum function is linked
> + into L1 instruction memory. (less latency)
>
> config CACHELINE_ALIGNED_L1
> bool "Locate cacheline_aligned data to L1 Data Memory"
> default y
> depends on !BF531
> help
> - If enabled cacheline_anligned data is linked
> - into L1 data memory.(less latency)
> + If enabled, the cacheline_aligned data is linked
> + into L1 data memory. (less latency)
>
> config SYSCALL_TAB_L1
> bool "Locate Syscall Table L1 Data Memory"
> default n
> depends on !BF531
> help
> - If enabled the Syscall LUT is linked
> - into L1 data memory.(less latency)
> + If enabled, the the Syscall LUT is linked
> + into L1 data memory. (less latency)
>
> config CPLB_SWITCH_TAB_L1
> bool "Locate CPLB Switch Tables L1 Data Memory"
> @@ -536,7 +536,7 @@
> depends on !BF531
> help
> If enabled the CPLB Switch Tables are linked
> - into L1 data memory.(less latency)
> + into L1 data memory. (less latency)
>
> endmenu
>
> @@ -905,13 +905,13 @@
> from.
>
> config DEBUG_ICACHE_CHECK
> - bool "Check Instruction cache coherancy"
> + bool "Check Instruction cache coherency"
> depends on DEBUG_KERNEL
> depends on DEBUG_HWERR
> help
> - Say Y here if you are getting wierd unexplained errors. This will
> - ensure that icache is what SDRAM says it should be, by doing a
> - byte wise comparision between SDRAM and instruction cache. This
> + Say Y here if you are getting weird unexplained errors. This will
> + ensure that icache is what SDRAM says it should be by doing a
> + byte wise comparison between SDRAM and instruction cache. This
> also relocates the irq_panic() function to L1 memory, (which is
> un-cached).
>
> @@ -921,7 +921,7 @@
> help
> Say Y here to put in an mini-execption handler before the kernel
> replaces the bootloader exception handler. This will stop kernels
> - from dieing at startup with no visible error messages.
> + from dying at startup with no visible error messages.
>
> config DEBUG_SERIAL_EARLY_INIT
> bool "Initialize serial driver early"
> @@ -930,8 +930,8 @@
> help
> Say Y here if you want to get kernel output early when kernel
> crashes before the normal console initialization. If this option
> - is enable, console output will always go to the ttyBF0, no matter
> - what kernel boot paramters you set.
> + is enabled, console output will always go to the ttyBF0, no matter
> + what kernel boot parameters you set.
>
> config DEBUG_HUNT_FOR_ZERO
> bool "Catch NULL pointer reads/writes"
> diff -ru a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig
> --- a/arch/cris/arch-v10/Kconfig 2007-04-25 23:08:32.000000000 -0400
> +++ b/arch/cris/arch-v10/Kconfig 2007-05-11 20:59:17.000000000 -0400
> @@ -182,7 +182,7 @@
> set this to same as CONFIG_ETRAX_LED1G (normally 2).
>
> config ETRAX_LED8Y
> - int "Eigth yellow LED bit"
> + int "Eighth yellow LED bit"
> depends on ETRAX_CSP0_LEDS
> default "2"
> help
> diff -ru a/arch/ia64/Kconfig b/arch/ia64/Kconfig
> --- a/arch/ia64/Kconfig 2007-05-11 20:32:25.000000000 -0400
> +++ b/arch/ia64/Kconfig 2007-05-11 21:40:23.000000000 -0400
> @@ -442,9 +442,9 @@
> config IA64_MC_ERR_INJECT
> tristate "MC error injection support"
> help
> - Selets whether support for MC error injection. By enabling the
> - support, kernel provide sysfs interface for user application to
> - call MC error injection PAL procedure to inject various errors.
> + Adds support for MC error injection. If enabled, the kernel
> + will provide a sysfs interface for user applications to
> + call MC error injection PAL procedures to inject various errors.
> This is a useful tool for MCA testing.
>
> If you're unsure, do not select this option.
> @@ -471,7 +471,7 @@
> but it is independent of the system firmware. And like a reboot
> you can start any kernel with it, not just Linux.
>
> - The name comes from the similiarity to the exec system call.
> + The name comes from the similarity to the exec system call.
>
> It is an ongoing process to be certain the hardware in a machine
> is properly shutdown, so do not be surprised if this code does not
> diff -ru a/arch/mips/Kconfig b/arch/mips/Kconfig
> --- a/arch/mips/Kconfig 2007-05-11 20:32:29.000000000 -0400
> +++ b/arch/mips/Kconfig 2007-05-11 21:20:49.000000000 -0400
> @@ -748,8 +748,8 @@
>
> This is useful for kernel debugging when your machine crashes very
> early before the console code is initialized. For normal operation
> - it is not recommended because it looks on some machines ugly and
> - oesn't cooperate with an X server. You should normally N here,
> + it is not recommended because it looks ugly on some machines and
> + doesn't cooperate with an X server. You should normally say N here,
> unless you want to debug such a crash.
>
> config SYS_HAS_EARLY_PRINTK
> @@ -1749,7 +1749,7 @@
> but it is independent of the system firmware. And like a reboot
> you can start any kernel with it, not just Linux.
>
> - The name comes from the similiarity to the exec system call.
> + The name comes from the similarity to the exec system call.
>
> It is an ongoing process to be certain the hardware in a machine
> is properly shutdown, so do not be surprised if this code does not
> diff -ru a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
> --- a/arch/powerpc/platforms/Kconfig 2007-05-11 20:32:30.000000000 -0400
> +++ b/arch/powerpc/platforms/Kconfig 2007-05-11 21:30:35.000000000 -0400
> @@ -108,7 +108,7 @@
> depends PPC_IBM_CELL_BLADE
> help
> PMI (Platform Management Interrupt) is a way to
> - communicate with the BMC (Baseboard Mangement Controller).
> + communicate with the BMC (Baseboard Management Controller).
> It is used in some IBM Cell blades.
> default m
>
> diff -ru a/arch/um/Kconfig b/arch/um/Kconfig
> --- a/arch/um/Kconfig 2007-05-11 20:32:32.000000000 -0400
> +++ b/arch/um/Kconfig 2007-05-11 21:41:30.000000000 -0400
> @@ -3,7 +3,7 @@
> option defconfig_list
> default "arch/$ARCH/defconfig"
>
> -# UML uses the generic IRQ sugsystem
> +# UML uses the generic IRQ subsystem
> config GENERIC_HARDIRQS
> bool
> default y
> diff -ru a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> --- a/drivers/i2c/busses/Kconfig 2007-05-11 20:32:43.000000000 -0400
> +++ b/drivers/i2c/busses/Kconfig 2007-05-11 21:36:01.000000000 -0400
> @@ -258,7 +258,7 @@
> depends on ARCH_IXP2000
> select I2C_ALGOBIT
> help
> - Say Y here if you have an Intel IXP2000(2400, 2800, 2850) based
> + Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based
> system and are using GPIO lines for an I2C bus.
>
> This support is also available as a module. If so, the module
> @@ -273,8 +273,8 @@
> default y
> help
> This exposes the various PowerMac i2c interfaces to the linux i2c
> - layer and to userland. It is used by various drivers on the powemac
> - platform, thus should generally be enabled.
> + layer and to userland. It is used by various drivers on the PowerMac
> + platform, and should generally be enabled.
>
> This support is also available as a module. If so, the module
> will be called i2c-powermac.
> @@ -423,12 +423,12 @@
> tristate "Simtec Generic I2C interface"
> select I2C_ALGOBIT
> help
> - If you say yes to this option, support will be inclyded for
> + If you say yes to this option, support will be included for
> the Simtec Generic I2C interface. This driver is for the
> simple I2C bus used on newer Simtec products for general
> I2C, such as DDC on the Simtec BBD2016A.
>
> - This driver can also be build as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called i2c-simtec.
>
> config SCx200_I2C
> diff -ru a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> --- a/drivers/mfd/Kconfig 2007-05-11 20:32:56.000000000 -0400
> +++ b/drivers/mfd/Kconfig 2007-05-11 20:50:59.000000000 -0400
> @@ -10,8 +10,8 @@
> ---help---
> This is the core driver for the Silicon Motion SM501 multimedia
> companion chip. This device is a multifunction device which may
> - provide numerous interfaces including USB host controller USB gadget,
> - Asyncronous Serial ports, Audio functions and a dual display video
> + provide numerous interfaces including USB host controller, USB gadget,
> + asynchronous serial ports, audio functions, and a dual display video
> interface. The device may be connected by PCI or local bus with
> varying functions enabled.
>
> diff -ru a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> --- a/drivers/misc/Kconfig 2007-05-11 20:32:56.000000000 -0400
> +++ b/drivers/misc/Kconfig 2007-05-11 21:03:35.000000000 -0400
> @@ -148,7 +148,7 @@
> For more information about this driver see
> <file:Documentation/thinkpad-acpi.txt> and <http://ibm-acpi.sf.net/> .
>
> - This driver was formely known as ibm-acpi.
> + This driver was formerly known as ibm-acpi.
>
> If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
>
> @@ -182,7 +182,7 @@
> default y
> ---help---
> Allows the thinkpad_acpi driver to handle removable bays. It will
> - eletrically disable the device in the bay, and also generate
> + electrically disable the device in the bay, and also generate
> notifications when the bay lever is ejected or inserted.
>
> If you are not sure, say Y here.
> diff -ru a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
> --- a/drivers/mtd/maps/Kconfig 2007-05-11 20:32:59.000000000 -0400
> +++ b/drivers/mtd/maps/Kconfig 2007-05-11 21:32:22.000000000 -0400
> @@ -54,7 +54,7 @@
> help
> This is the total width of the data bus of the flash devices
> in octets. For example, if you have a data bus width of 32
> - bits, you would set the bus width octect value to 4. This is
> + bits, you would set the bus width octet value to 4. This is
> used internally by the CFI drivers.
> Ignore this option if you use run-time physmap configuration
> (i.e., run-time calling physmap_configure()).
> @@ -73,12 +73,12 @@
> depends on PMC_MSP && MTD_CFI
> select MTD_PARTITIONS
> help
> - This provides a 'mapping' driver which support the way
> + This provides a 'mapping' driver which supports the way
> in which user-programmable flash chips are connected on the
> - PMC-Sierra MSP eval/demo boards
> + PMC-Sierra MSP eval/demo boards.
>
> choice
> - prompt "Maximum mappable memory avialable for flash IO"
> + prompt "Maximum mappable memory available for flash IO"
> depends on MTD_PMC_MSP_EVM
> default MSP_FLASH_MAP_LIMIT_32M
>
> diff -ru a/drivers/video/Kconfig b/drivers/video/Kconfig
> --- a/drivers/video/Kconfig 2007-05-11 20:33:11.000000000 -0400
> +++ b/drivers/video/Kconfig 2007-05-11 21:18:17.000000000 -0400
> @@ -618,7 +618,7 @@
> help
> This enables support for the Hecuba board. This driver was tested
> with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO
> - interface (8 bit data, 4 bit control). If you anticpate using
> + interface (8 bit data, 4 bit control). If you anticipate using
> this driver, say Y or M; otherwise say N. You must specify the
> GPIO IO address to be used for setting control and data.
>
> @@ -1542,7 +1542,7 @@
> help
> This is the framebuffer device for the Sun XVR-500 and similar
> graphics cards based upon the 3DLABS Wildcat chipset. The driver
> - only works on sparc64 systems where the system firwmare has
> + only works on sparc64 systems where the system firmware has
> mostly initialized the card already. It is treated as a
> completely dumb framebuffer device.
>
> @@ -1555,7 +1555,7 @@
> help
> This is the framebuffer device for the Sun XVR-2500 and similar
> graphics cards based upon the 3DLABS Wildcat chipset. The driver
> - only works on sparc64 systems where the system firwmare has
> + only works on sparc64 systems where the system firmware has
> mostly initialized the card already. It is treated as a
> completely dumb framebuffer device.
>
> diff -ru a/net/ipv4/Kconfig b/net/ipv4/Kconfig
> --- a/net/ipv4/Kconfig 2007-05-11 20:33:58.000000000 -0400
> +++ b/net/ipv4/Kconfig 2007-05-11 21:10:15.000000000 -0400
> @@ -593,7 +593,7 @@
> depends on EXPERIMENTAL
> default n
> ---help---
> - TCP-Illinois is a sender-side modificatio of TCP Reno for
> + TCP-Illinois is a sender-side modification of TCP Reno for
> high speed long delay links. It uses round-trip-time to
> adjust the alpha and beta parameters to achieve a higher average
> throughput and maintain fairness.


--
Matt LaPlante
CCNP, CCDP, A+, Linux+, CQS
kernel1@cyberdogtech.com

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-05-18 19:13    [W:0.062 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site