lkml.org 
[lkml]   [2007]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: radeonfb and X800 cards
Il Thu, May 17, 2007 at 11:59:23AM +1000, Benjamin Herrenschmidt ha scritto: 
> On Wed, 2007-05-16 at 21:47 -0400, Daniel Drake wrote:
> > Hi,
> >
> > Did anything happen to the patch titled "radeonfb: add support for newer
> > cards"?
> > http://lwn.net/Articles/215965/
> >
> > Jimmy at http://bugs.gentoo.org/174063 has extended upon this with some
> > further fixes based on code the in X11 driver. The patches are on the
> > bug report.
> >
> > Ben, where can the most up-to-date radeonfb code be found?
>
> upstream. I haven't released anything else so far. Does the patch still
> apply ?

This is what I'm using here, it's still the same old patch (Solomon's
plus my stuff). I think I can coordinate with Jimmy.Jazz@gmx.net to
create an incremental patch to fix radeonfb on his hardware (provided
that this mega-patch is suitable as baseline that is).

---
Applies to current git
drivers/video/aty/ati_ids.h | 32
drivers/video/aty/radeon_accel.c | 19
drivers/video/aty/radeon_backlight.c | 4
drivers/video/aty/radeon_base.c | 494 +++++++----
drivers/video/aty/radeon_i2c.c | 66 -
drivers/video/aty/radeon_monitor.c | 1339 +++++++++++++++++++++---------
drivers/video/aty/radeonfb.h | 163 ++-
7 files changed, 1516 insertions(+), 601 deletions(-)
diff --git a/drivers/video/aty/ati_ids.h b/drivers/video/aty/ati_ids.h
index 90e7df2..7b701cc 100644
--- a/drivers/video/aty/ati_ids.h
+++ b/drivers/video/aty/ati_ids.h
@@ -31,6 +31,7 @@
#define PCI_CHIP_RV360_AR 0x4152
#define PCI_CHIP_RV350_AS 0x4153
#define PCI_CHIP_RV350_AT 0x4154
+#define PCI_CHIP_RV350_AU 0x4155
#define PCI_CHIP_RV350_AV 0x4156
#define PCI_CHIP_MACH32 0x4158
#define PCI_CHIP_RS250_4237 0x4237
@@ -71,7 +72,13 @@
#define PCI_CHIP_R420_JL 0x4A4C
#define PCI_CHIP_R420_JM 0x4A4D
#define PCI_CHIP_R420_JN 0x4A4E
+#define PCI_CHIP_R420_JO 0x4A4F
#define PCI_CHIP_R420_JP 0x4A50
+#define PCI_CHIP_R420_JT 0x4A54
+#define PCI_CHIP_R480_KI 0x4B49
+#define PCI_CHIP_R480_KJ 0x4B4A
+#define PCI_CHIP_R480_KK 0x4B4B
+#define PCI_CHIP_R480_KL 0x4B4C
#define PCI_CHIP_MACH64LB 0x4C42
#define PCI_CHIP_MACH64LD 0x4C44
#define PCI_CHIP_RAGE128LE 0x4C45
@@ -182,9 +189,19 @@
#define PCI_CHIP_R423_UI 0x5549
#define PCI_CHIP_R423_UJ 0x554A
#define PCI_CHIP_R423_UK 0x554B
+#define PCI_CHIP_R423_UL 0x554C
+#define PCI_CHIP_R423_UM 0x554D
+#define PCI_CHIP_R423_UN 0x554E
+#define PCI_CHIP_R423_UO 0x554F
+#define PCI_CHIP_R423_UP 0x5550
#define PCI_CHIP_R423_UQ 0x5551
#define PCI_CHIP_R423_UR 0x5552
#define PCI_CHIP_R423_UT 0x5554
+#define PCI_CHIP_RV410_VJ 0x564A
+#define PCI_CHIP_RV410_VK 0x564B
+#define PCI_CHIP_RV410_VO 0x564F
+#define PCI_CHIP_RV410_VR 0x5652
+#define PCI_CHIP_RV410_VS 0x5653
#define PCI_CHIP_MACH64VT 0x5654
#define PCI_CHIP_MACH64VU 0x5655
#define PCI_CHIP_MACH64VV 0x5656
@@ -206,7 +223,22 @@
#define PCI_CHIP_RV280_5964 0x5964
#define PCI_CHIP_RV280_5C61 0x5C61
#define PCI_CHIP_RV280_5C63 0x5C63
+#define PCI_CHIP_R423_5D48 0x5D48
+#define PCI_CHIP_R423_5D49 0x5D49
+#define PCI_CHIP_R423_5D4A 0x5D4A
+#define PCI_CHIP_R480_5D4C 0x5D4C
+#define PCI_CHIP_R480_5D4D 0x5D4D
+#define PCI_CHIP_R480_5D4E 0x5D4E
+#define PCI_CHIP_R480_5D4F 0x5D4F
+#define PCI_CHIP_R480_5D50 0x5D50
+#define PCI_CHIP_R480_5D52 0x5D52
#define PCI_CHIP_R423_5D57 0x5D57
+#define PCI_CHIP_RV410_5E48 0x5E48
+#define PCI_CHIP_RV410_5E4A 0x5E4A
+#define PCI_CHIP_RV410_5E4B 0x5E4B
+#define PCI_CHIP_RV410_5E4C 0x5E4C
+#define PCI_CHIP_RV410_5E4D 0x5E4D
+#define PCI_CHIP_RV410_5E4F 0x5E4F
#define PCI_CHIP_RS350_7834 0x7834
#define PCI_CHIP_RS350_7835 0x7835
#define PCI_CHIP_RS480_5955 0x5955
diff --git a/drivers/video/aty/radeon_accel.c b/drivers/video/aty/radeon_accel.c
index 3ca27cb..529f158 100644
--- a/drivers/video/aty/radeon_accel.c
+++ b/drivers/video/aty/radeon_accel.c
@@ -203,9 +203,7 @@ void radeonfb_engine_reset(struct radeonfb_info *rinfo)
host_path_cntl = INREG(HOST_PATH_CNTL);
rbbm_soft_reset = INREG(RBBM_SOFT_RESET);

- if (rinfo->family == CHIP_FAMILY_R300 ||
- rinfo->family == CHIP_FAMILY_R350 ||
- rinfo->family == CHIP_FAMILY_RV350) {
+ if (IS_R300_VARIANT(rinfo)) {
u32 tmp;

OUTREG(RBBM_SOFT_RESET, (rbbm_soft_reset |
@@ -241,9 +239,7 @@ void radeonfb_engine_reset(struct radeonfb_info *rinfo)
INREG(HOST_PATH_CNTL);
OUTREG(HOST_PATH_CNTL, host_path_cntl);

- if (rinfo->family != CHIP_FAMILY_R300 ||
- rinfo->family != CHIP_FAMILY_R350 ||
- rinfo->family != CHIP_FAMILY_RV350)
+ if (IS_R300_VARIANT(rinfo))
OUTREG(RBBM_SOFT_RESET, rbbm_soft_reset);

OUTREG(CLOCK_CNTL_INDEX, clock_cntl_index);
@@ -254,16 +250,15 @@ void radeonfb_engine_init (struct radeonfb_info *rinfo)
{
unsigned long temp;

- /* disable 3D engine */
- OUTREG(RB3D_CNTL, 0);
-
radeonfb_engine_reset(rinfo);

radeon_fifo_wait (1);
- if ((rinfo->family != CHIP_FAMILY_R300) &&
- (rinfo->family != CHIP_FAMILY_R350) &&
- (rinfo->family != CHIP_FAMILY_RV350))
+ if (IS_R300_VARIANT(rinfo)) {
+ temp = INREG(RB2D_DSTCACHE_MODE);
+ OUTREG(RB2D_DSTCACHE_MODE, temp | (1<<17)); /* FIXME */
+ } else {
OUTREG(RB2D_DSTCACHE_MODE, 0);
+ }

radeon_fifo_wait (3);
/* We re-read MC_FB_LOCATION from card as it can have been
diff --git a/drivers/video/aty/radeon_backlight.c b/drivers/video/aty/radeon_backlight.c
index 0be25fa..0c264f3 100644
--- a/drivers/video/aty/radeon_backlight.c
+++ b/drivers/video/aty/radeon_backlight.c
@@ -52,7 +52,7 @@ static int radeon_bl_update_status(struct backlight_device *bd)
u32 lvds_gen_cntl, tmpPixclksCntl;
int level;

- if (rinfo->mon1_type != MT_LCD)
+ if (PRIMARY_MONITOR(rinfo) != MT_LCD)
return 0;

/* We turn off the LCD completely instead of just dimming the
@@ -138,7 +138,7 @@ void radeonfb_bl_init(struct radeonfb_info *rinfo)
struct radeon_bl_privdata *pdata;
char name[12];

- if (rinfo->mon1_type != MT_LCD)
+ if (PRIMARY_MONITOR(rinfo) == MT_LCD)
return;

#ifdef CONFIG_PMAC_BACKLIGHT
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index 2ce0501..9616303 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -3,6 +3,7 @@
*
* framebuffer driver for ATI Radeon chipset video boards
*
+ * Copyright 2006 Solomon Peachy <pizza@shaftnet.org>
* Copyright 2003 Ben. Herrenschmidt <benh@kernel.crashing.org>
* Copyright 2000 Ani Joshi <ajoshi@kernel.crashing.org>
*
@@ -50,7 +51,7 @@
*/


-#define RADEON_VERSION "0.2.0"
+#define RADEON_VERSION "0.3.0"

#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -112,7 +113,7 @@ static struct pci_device_id radeonfb_pci_table[] = {
/* Radeon IGP320M (U1) */
CHIP_DEF(PCI_CHIP_RS100_4336, RS100, CHIP_HAS_CRTC2 | CHIP_IS_IGP | CHIP_IS_MOBILITY),
/* Radeon IGP320 (A3) */
- CHIP_DEF(PCI_CHIP_RS100_4136, RS100, CHIP_HAS_CRTC2 | CHIP_IS_IGP),
+ CHIP_DEF(PCI_CHIP_RS100_4136, RS100, CHIP_HAS_CRTC2 | CHIP_IS_IGP),
/* IGP330M/340M/350M (U2) */
CHIP_DEF(PCI_CHIP_RS200_4337, RS200, CHIP_HAS_CRTC2 | CHIP_IS_IGP | CHIP_IS_MOBILITY),
/* IGP330/340/350 (A4) */
@@ -182,6 +183,7 @@ static struct pci_device_id radeonfb_pci_table[] = {
CHIP_DEF(PCI_CHIP_RV360_AR, RV350, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_RV350_AS, RV350, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_RV350_AT, RV350, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_RV350_AU, RV350, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_RV350_AV, RV350, CHIP_HAS_CRTC2),
/* 9800/Pro/FileGL X2 */
CHIP_DEF(PCI_CHIP_R350_AH, R350, CHIP_HAS_CRTC2),
@@ -192,7 +194,7 @@ static struct pci_device_id radeonfb_pci_table[] = {
CHIP_DEF(PCI_CHIP_R350_NI, R350, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_R360_NJ, R350, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_R350_NK, R350, CHIP_HAS_CRTC2),
- /* Newer stuff */
+ /* X300/X600 */
CHIP_DEF(PCI_CHIP_RV380_3E50, RV380, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_RV380_3E54, RV380, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_RV380_3150, RV380, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY),
@@ -203,6 +205,19 @@ static struct pci_device_id radeonfb_pci_table[] = {
CHIP_DEF(PCI_CHIP_RV370_5B65, RV380, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_RV370_5460, RV380, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY),
CHIP_DEF(PCI_CHIP_RV370_5464, RV380, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY),
+ /* X700 */
+ CHIP_DEF(PCI_CHIP_RV410_VJ, RV410, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY),
+ CHIP_DEF(PCI_CHIP_RV410_VK, RV410, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY),
+ CHIP_DEF(PCI_CHIP_RV410_VO, RV410, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY),
+ CHIP_DEF(PCI_CHIP_RV410_VR, RV410, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY),
+ CHIP_DEF(PCI_CHIP_RV410_VS, RV410, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY),
+ CHIP_DEF(PCI_CHIP_RV410_5E48, RV410, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_RV410_5E4A, RV410, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_RV410_5E4B, RV410, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_RV410_5E4C, RV410, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_RV410_5E4D, RV410, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_RV410_5E4F, RV410, CHIP_HAS_CRTC2),
+ /* X800/X850 */
CHIP_DEF(PCI_CHIP_R420_JH, R420, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_R420_JI, R420, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_R420_JJ, R420, CHIP_HAS_CRTC2),
@@ -210,7 +225,9 @@ static struct pci_device_id radeonfb_pci_table[] = {
CHIP_DEF(PCI_CHIP_R420_JL, R420, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_R420_JM, R420, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_R420_JN, R420, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY),
+ CHIP_DEF(PCI_CHIP_R420_JO, R420, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_R420_JP, R420, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_R420_JT, R420, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_R423_UH, R420, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_R423_UI, R420, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_R423_UJ, R420, CHIP_HAS_CRTC2),
@@ -219,6 +236,24 @@ static struct pci_device_id radeonfb_pci_table[] = {
CHIP_DEF(PCI_CHIP_R423_UR, R420, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_R423_UT, R420, CHIP_HAS_CRTC2),
CHIP_DEF(PCI_CHIP_R423_5D57, R420, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_R423_UP, R420, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_R423_5D49, R420, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY),
+ CHIP_DEF(PCI_CHIP_R423_5D4A, R420, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY),
+ CHIP_DEF(PCI_CHIP_R423_5D48, R420, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY),
+ CHIP_DEF(PCI_CHIP_R423_UO, R420, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_R423_UM, R420, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_R423_UN, R420, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_R423_UL, R420, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_R480_5D4C, R420, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_R480_5D50, R420, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_R480_5D4E, R420, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_R480_5D4F, R420, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_R480_5D52, R420, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_R480_5D4D, R420, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_R480_KJ, R420, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_R480_KK, R420, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_R480_KI, R420, CHIP_HAS_CRTC2),
+ CHIP_DEF(PCI_CHIP_R480_KL, R420, CHIP_HAS_CRTC2),
/* Original Radeon/7200 */
CHIP_DEF(PCI_CHIP_RADEON_QD, RADEON, 0),
CHIP_DEF(PCI_CHIP_RADEON_QE, RADEON, 0),
@@ -239,7 +274,7 @@ typedef struct {
* interfere with anything
*/
static reg_val common_regs[] = {
- { OVR_CLR, 0 },
+ { OVR_CLR, 0 },
{ OVR_WID_LEFT_RIGHT, 0 },
{ OVR_WID_TOP_BOTTOM, 0 },
{ OV0_SCALE_CNTL, 0 },
@@ -254,13 +289,13 @@ static reg_val common_regs[] = {
/*
* globals
*/
-
static char *mode_option;
static char *monitor_layout;
static int noaccel = 0;
static int default_dynclk = -2;
static int nomodeset = 0;
static int ignore_edid = 0;
+static int ignore_conntable = 0;
static int mirror = 0;
static int panel_yres = 0;
static int force_dfp = 0;
@@ -276,6 +311,12 @@ static int backlight = 1;
static int backlight = 0;
#endif

+#ifdef CONFIG_FB_RADEON_DEBUG
+int radeonfb_debug = 1;
+#else
+int radeonfb_debug = 0;
+#endif
+
/*
* prototypes
*/
@@ -331,7 +372,7 @@ static int __devinit radeon_map_ROM(struct radeonfb_info *rinfo, struct pci_dev
* to phase out Open Firmware images.
*
* Currently, we only look at the first PCI data, we could iteratre and deal with
- * them all, and we should use fb_bios_start relative to start of image and not
+ * them all, and we should use fp_bios_start relative to start of image and not
* relative start of ROM, but so far, I never found a dual-image ATI card
*
* typedef struct {
@@ -417,7 +458,7 @@ static int __devinit radeon_find_mem_vbios(struct radeonfb_info *rinfo)
* Read XTAL (ref clock), SCLK and MCLK from Open Firmware device
* tree. Hopefully, ATI OF driver is kind enough to fill these
*/
-static int __devinit radeon_read_xtal_OF (struct radeonfb_info *rinfo)
+static int __devinit radeon_get_pll_info_openfirmware (struct radeonfb_info *rinfo)
{
struct device_node *dp = rinfo->of_node;
const u32 *val;
@@ -440,7 +481,8 @@ static int __devinit radeon_read_xtal_OF (struct radeonfb_info *rinfo)
if (val && *val)
rinfo->pll.mclk = (*val) / 10;

- return 0;
+ RTRACE("Retrieved PLL infos from Open Firmware\n");
+ return 0;
}
#endif /* CONFIG_PPC_OF || CONFIG_SPARC */

@@ -582,10 +624,87 @@ static int __devinit radeon_probe_pll_params(struct radeonfb_info *rinfo)
return 0;
}

+static int __devinit radeon_get_pll_info_legacy(struct radeonfb_info *rinfo)
+{
+ u16 pll_info_block;
+
+ if (!rinfo->bios_seg)
+ return -EINVAL;
+
+ pll_info_block = BIOS_IN16(rinfo->fp_bios_start + 0x30);
+
+ rinfo->pll.sclk = BIOS_IN16(pll_info_block + 0x08);
+ rinfo->pll.mclk = BIOS_IN16(pll_info_block + 0x0a);
+ rinfo->pll.ref_clk = BIOS_IN16(pll_info_block + 0x0e);
+ rinfo->pll.ref_div = BIOS_IN16(pll_info_block + 0x10);
+ rinfo->pll.ppll_min = BIOS_IN32(pll_info_block + 0x12);
+ rinfo->pll.ppll_max = BIOS_IN32(pll_info_block + 0x16);
+
+ RTRACE("Retrieved PLL infos from Legacy BIOS\n");
+ return 0;
+}
+
+
+static int __devinit radeon_get_pll_info_atom(struct radeonfb_info *rinfo)
+{
+ u16 pll_info_block;
+
+ if (!rinfo->bios_seg)
+ return -EINVAL;
+
+ pll_info_block = BIOS_IN16(rinfo->atom_data_start + 12);
+
+ rinfo->pll.sclk = BIOS_IN32(pll_info_block + 8);
+ rinfo->pll.mclk = BIOS_IN32(pll_info_block + 12);
+ rinfo->pll.ref_clk = BIOS_IN16(pll_info_block + 82);
+ rinfo->pll.ref_div = 0; /* Have to get it elsewhere */
+ rinfo->pll.ppll_min = BIOS_IN16(pll_info_block + 78);
+ rinfo->pll.ppll_max = BIOS_IN32(pll_info_block + 32);
+
+ RTRACE("Retrieved PLL infos from ATOM BIOS\n");
+ return 0;
+}
+
+static void radeon_detect_bios_type(struct radeonfb_info *rinfo)
+{
+#if defined(CONFIG_PPC_OF) || defined(CONFIG_SPARC)
+ rinfo->is_atom_bios = 0;
+ rinfo->radeon_get_pll_info = radeon_get_pll_info_openfirmware;
+ rinfo->radeon_get_lvds_info = radeon_get_lvds_info_openfirmware;
+ rinfo->radeon_get_tmds_info = NULL;
+ rinfo->radeon_get_conn_info = radeon_get_conn_info_openfirmware;
+#else
+ int tmp = rinfo->fp_bios_start + 4;
+ unsigned char sign[4];
+
+ sign[0] = BIOS_IN8(tmp);
+ sign[1] = BIOS_IN8(tmp + 1);
+ sign[2] = BIOS_IN8(tmp + 2);
+ sign[3] = BIOS_IN8(tmp + 3);
+
+ if (!memcmp(sign, "ATOM", 4) || !memcmp(sign, "MOTA", 4)) {
+ rinfo->is_atom_bios = 1;
+
+ rinfo->atom_data_start = BIOS_IN16(rinfo->fp_bios_start + 32);
+ rinfo->radeon_get_pll_info = radeon_get_pll_info_atom;
+ rinfo->radeon_get_lvds_info = radeon_get_lvds_info_atom;
+ rinfo->radeon_get_conn_info = radeon_get_conn_info_atom;
+ rinfo->radeon_get_tmds_info = radeon_get_tmds_info_atom;
+ } else {
+ rinfo->is_atom_bios = 0;
+ rinfo->radeon_get_pll_info = radeon_get_pll_info_legacy;
+ rinfo->radeon_get_lvds_info = radeon_get_lvds_info_legacy;
+ rinfo->radeon_get_conn_info = radeon_get_conn_info_legacy;
+ rinfo->radeon_get_tmds_info = radeon_get_tmds_info_legacy;
+ }
+#endif /* CONFIG_PPC_OF || defined(CONFIG_SPARC) */
+
+}
+
/*
* Retrieve PLL infos by different means (BIOS, Open Firmware, register probing...)
*/
-static void __devinit radeon_get_pllinfo(struct radeonfb_info *rinfo)
+static void __devinit radeon_get_pll_info(struct radeonfb_info *rinfo)
{
/*
* In the case nothing works, these are defaults; they are mostly
@@ -637,46 +756,30 @@ static void __devinit radeon_get_pllinfo(struct radeonfb_info *rinfo)
case PCI_DEVICE_ID_ATI_RADEON_QF:
case PCI_DEVICE_ID_ATI_RADEON_QG:
default:
- rinfo->pll.ppll_max = 35000;
- rinfo->pll.ppll_min = 12000;
+ if (rinfo->family == CHIP_FAMILY_R420) {
+ rinfo->pll.ppll_max = 50000;
+ rinfo->pll.ppll_min = 20000;
+ } else {
+ rinfo->pll.ppll_max = 35000;
+ rinfo->pll.ppll_min = 12000;
+ }
rinfo->pll.mclk = 16600;
rinfo->pll.sclk = 16600;
rinfo->pll.ref_clk = 2700;
break;
}
- rinfo->pll.ref_div = INPLL(PPLL_REF_DIV) & PPLL_REF_DIV_MASK;
-
-
-#if defined(CONFIG_PPC_OF) || defined(CONFIG_SPARC)
- /*
- * Retrieve PLL infos from Open Firmware first
- */
- if (!force_measure_pll && radeon_read_xtal_OF(rinfo) == 0) {
- printk(KERN_INFO "radeonfb: Retrieved PLL infos from Open Firmware\n");
- goto found;
- }
-#endif /* CONFIG_PPC_OF || CONFIG_SPARC */

/*
- * Check out if we have an X86 which gave us some PLL informations
- * and if yes, retrieve them
+ * If we have a way to retrieve the PLL information, do so.
*/
- if (!force_measure_pll && rinfo->bios_seg) {
- u16 pll_info_block = BIOS_IN16(rinfo->fp_bios_start + 0x30);
-
- rinfo->pll.sclk = BIOS_IN16(pll_info_block + 0x08);
- rinfo->pll.mclk = BIOS_IN16(pll_info_block + 0x0a);
- rinfo->pll.ref_clk = BIOS_IN16(pll_info_block + 0x0e);
- rinfo->pll.ref_div = BIOS_IN16(pll_info_block + 0x10);
- rinfo->pll.ppll_min = BIOS_IN32(pll_info_block + 0x12);
- rinfo->pll.ppll_max = BIOS_IN32(pll_info_block + 0x16);
-
- printk(KERN_INFO "radeonfb: Retrieved PLL infos from BIOS\n");
- goto found;
+ if (!force_measure_pll && rinfo->radeon_get_pll_info) {
+ if (!rinfo->radeon_get_pll_info(rinfo)) {
+ goto found;
+ }
}

/*
- * We didn't get PLL parameters from either OF or BIOS, we try to
+ * If we don't get the PLL parameters handed to us, we try to
* probe them
*/
if (radeon_probe_pll_params(rinfo) == 0) {
@@ -687,9 +790,25 @@ static void __devinit radeon_get_pllinfo(struct radeonfb_info *rinfo)
/*
* Fall back to already-set defaults...
*/
- printk(KERN_INFO "radeonfb: Used default PLL infos\n");
+ printk(KERN_INFO "radeonfb: Used default PLL infos\n");

found:
+
+ /* Check and fix-up the PLL divisor if necessary */
+ if (rinfo->pll.ref_div < 2) {
+ int tmp = INPLL(PPLL_REF_DIV);
+ if (rinfo->family == CHIP_FAMILY_RS300) {
+ rinfo->pll.ref_div = (tmp & R300_PPLL_REF_DIV_ACC_MASK) >> R300_PPLL_REF_DIV_ACC_SHIFT;
+ } else {
+ rinfo->pll.ref_div = tmp & PPLL_REF_DIV_MASK;
+ }
+
+ /* Sane default */
+ if (rinfo->pll.ref_div < 2) {
+ rinfo->pll.ref_div = 12;
+ }
+ }
+
/*
* Some methods fail to retrieve SCLK and MCLK values, we apply default
* settings in this case (200Mhz). If that really happne often, we could
@@ -705,7 +824,7 @@ found:
rinfo->pll.ref_div,
rinfo->pll.mclk / 100, rinfo->pll.mclk % 100,
rinfo->pll.sclk / 100, rinfo->pll.sclk % 100);
- printk("radeonfb: PLL min %d max %d\n", rinfo->pll.ppll_min, rinfo->pll.ppll_max);
+ RTRACE("PLL min %d max %d\n", rinfo->pll.ppll_min, rinfo->pll.ppll_max);
}

static int radeonfb_check_var (struct fb_var_screeninfo *var, struct fb_info *info)
@@ -846,7 +965,7 @@ static int radeonfb_pan_display (struct fb_var_screeninfo *var,
if (rinfo->asleep)
return 0;

- radeon_fifo_wait(2);
+ radeon_engine_idle();
OUTREG(CRTC_OFFSET, ((var->yoffset * var->xres_virtual + var->xoffset)
* var->bits_per_pixel / 8) & ~7);
return 0;
@@ -927,9 +1046,10 @@ static int radeonfb_ioctl (struct fb_info *info, unsigned int cmd,

int radeon_screen_blank(struct radeonfb_info *rinfo, int blank, int mode_switch)
{
- u32 val;
+ u32 val;
u32 tmp_pix_clks;
int unblank = 0;
+ int i;

if (rinfo->lock_blank)
return 0;
@@ -937,9 +1057,9 @@ int radeon_screen_blank(struct radeonfb_info *rinfo, int blank, int mode_switch)
radeon_engine_idle();

val = INREG(CRTC_EXT_CNTL);
- val &= ~(CRTC_DISPLAY_DIS | CRTC_HSYNC_DIS |
+ val &= ~(CRTC_DISPLAY_DIS | CRTC_HSYNC_DIS |
CRTC_VSYNC_DIS);
- switch (blank) {
+ switch (blank) {
case FB_BLANK_VSYNC_SUSPEND:
val |= (CRTC_DISPLAY_DIS | CRTC_VSYNC_DIS);
break;
@@ -956,81 +1076,84 @@ int radeon_screen_blank(struct radeonfb_info *rinfo, int blank, int mode_switch)
case FB_BLANK_UNBLANK:
default:
unblank = 1;
- }
+ }
OUTREG(CRTC_EXT_CNTL, val);

+ for (i = 0 ; i < RADEON_MAX_CONNECTORS ; i++) {
+ if (rinfo->heads[i] == -1)
+ continue;

- switch (rinfo->mon1_type) {
- case MT_DFP:
- if (unblank)
- OUTREGP(FP_GEN_CNTL, (FP_FPON | FP_TMDS_EN),
- ~(FP_FPON | FP_TMDS_EN));
- else {
- if (mode_switch || blank == FB_BLANK_NORMAL)
- break;
- OUTREGP(FP_GEN_CNTL, 0, ~(FP_FPON | FP_TMDS_EN));
- }
+ switch (rinfo->connectors[rinfo->heads[i]].mon_type) {
+ case MT_DFP:
+ if (unblank)
+ OUTREGP(FP_GEN_CNTL, (FP_FPON | FP_TMDS_EN),
+ ~(FP_FPON | FP_TMDS_EN));
+ else {
+ if (mode_switch || blank == FB_BLANK_NORMAL)
+ break;
+ OUTREGP(FP_GEN_CNTL, 0, ~(FP_FPON | FP_TMDS_EN));
+ }
break;
- case MT_LCD:
- del_timer_sync(&rinfo->lvds_timer);
- val = INREG(LVDS_GEN_CNTL);
- if (unblank) {
- u32 target_val = (val & ~LVDS_DISPLAY_DIS) | LVDS_BLON | LVDS_ON
- | LVDS_EN | (rinfo->init_state.lvds_gen_cntl
- & (LVDS_DIGON | LVDS_BL_MOD_EN));
- if ((val ^ target_val) == LVDS_DISPLAY_DIS)
- OUTREG(LVDS_GEN_CNTL, target_val);
- else if ((val ^ target_val) != 0) {
- OUTREG(LVDS_GEN_CNTL, target_val
- & ~(LVDS_ON | LVDS_BL_MOD_EN));
- rinfo->init_state.lvds_gen_cntl &= ~LVDS_STATE_MASK;
- rinfo->init_state.lvds_gen_cntl |=
- target_val & LVDS_STATE_MASK;
- if (mode_switch) {
- radeon_msleep(rinfo->panel_info.pwr_delay);
+ case MT_LCD:
+ del_timer_sync(&rinfo->lvds_timer);
+ val = INREG(LVDS_GEN_CNTL);
+ if (unblank) {
+ u32 target_val = (val & ~LVDS_DISPLAY_DIS) | LVDS_BLON | LVDS_ON
+ | LVDS_EN | (rinfo->init_state.lvds_gen_cntl
+ & (LVDS_DIGON | LVDS_BL_MOD_EN));
+ if ((val ^ target_val) == LVDS_DISPLAY_DIS)
OUTREG(LVDS_GEN_CNTL, target_val);
+ else if ((val ^ target_val) != 0) {
+ OUTREG(LVDS_GEN_CNTL, target_val
+ & ~(LVDS_ON | LVDS_BL_MOD_EN));
+ rinfo->init_state.lvds_gen_cntl &= ~LVDS_STATE_MASK;
+ rinfo->init_state.lvds_gen_cntl |=
+ target_val & LVDS_STATE_MASK;
+ if (mode_switch) {
+ radeon_msleep(rinfo->panel_info.pwr_delay);
+ OUTREG(LVDS_GEN_CNTL, target_val);
+ } else {
+ rinfo->pending_lvds_gen_cntl = target_val;
+ mod_timer(&rinfo->lvds_timer,
+ jiffies +
+ msecs_to_jiffies(rinfo->panel_info.pwr_delay));
+ }
}
- else {
- rinfo->pending_lvds_gen_cntl = target_val;
- mod_timer(&rinfo->lvds_timer,
- jiffies +
- msecs_to_jiffies(rinfo->panel_info.pwr_delay));
- }
+ } else {
+ val |= LVDS_DISPLAY_DIS;
+ OUTREG(LVDS_GEN_CNTL, val);
+
+ /* We don't do a full switch-off on a simple mode switch */
+ if (mode_switch || blank == FB_BLANK_NORMAL)
+ break;
+
+ /* Asic bug, when turning off LVDS_ON, we have to make sure
+ * RADEON_PIXCLK_LVDS_ALWAYS_ON bit is off
+ */
+ tmp_pix_clks = INPLL(PIXCLKS_CNTL);
+ if (rinfo->is_mobility || rinfo->is_IGP)
+ OUTPLLP(PIXCLKS_CNTL, 0, ~PIXCLK_LVDS_ALWAYS_ONb);
+ val &= ~(LVDS_BL_MOD_EN);
+ OUTREG(LVDS_GEN_CNTL, val);
+ udelay(100);
+ val &= ~(LVDS_ON | LVDS_EN);
+ OUTREG(LVDS_GEN_CNTL, val);
+ val &= ~LVDS_DIGON;
+ rinfo->pending_lvds_gen_cntl = val;
+ mod_timer(&rinfo->lvds_timer,
+ jiffies +
+ msecs_to_jiffies(rinfo->panel_info.pwr_delay));
+ rinfo->init_state.lvds_gen_cntl &= ~LVDS_STATE_MASK;
+ rinfo->init_state.lvds_gen_cntl |= val & LVDS_STATE_MASK;
+ if (rinfo->is_mobility || rinfo->is_IGP)
+ OUTPLL(PIXCLKS_CNTL, tmp_pix_clks);
}
- } else {
- val |= LVDS_DISPLAY_DIS;
- OUTREG(LVDS_GEN_CNTL, val);
-
- /* We don't do a full switch-off on a simple mode switch */
- if (mode_switch || blank == FB_BLANK_NORMAL)
- break;
-
- /* Asic bug, when turning off LVDS_ON, we have to make sure
- * RADEON_PIXCLK_LVDS_ALWAYS_ON bit is off
- */
- tmp_pix_clks = INPLL(PIXCLKS_CNTL);
- if (rinfo->is_mobility || rinfo->is_IGP)
- OUTPLLP(PIXCLKS_CNTL, 0, ~PIXCLK_LVDS_ALWAYS_ONb);
- val &= ~(LVDS_BL_MOD_EN);
- OUTREG(LVDS_GEN_CNTL, val);
- udelay(100);
- val &= ~(LVDS_ON | LVDS_EN);
- OUTREG(LVDS_GEN_CNTL, val);
- val &= ~LVDS_DIGON;
- rinfo->pending_lvds_gen_cntl = val;
- mod_timer(&rinfo->lvds_timer,
- jiffies +
- msecs_to_jiffies(rinfo->panel_info.pwr_delay));
- rinfo->init_state.lvds_gen_cntl &= ~LVDS_STATE_MASK;
- rinfo->init_state.lvds_gen_cntl |= val & LVDS_STATE_MASK;
- if (rinfo->is_mobility || rinfo->is_IGP)
- OUTPLL(PIXCLKS_CNTL, tmp_pix_clks);
+ break;
+ case MT_CRT:
+ // todo: powerdown DAC
+ default:
+ break;
}
- break;
- case MT_CRT:
- // todo: powerdown DAC
- default:
- break;
}

return 0;
@@ -1260,7 +1383,7 @@ static void radeon_write_pll_regs(struct radeonfb_info *rinfo, struct radeon_reg
~PPLL_DIV_SEL_MASK);
radeon_pll_errata_after_index(rinfo);
radeon_pll_errata_after_data(rinfo);
- return;
+ return;
}
}

@@ -1280,10 +1403,7 @@ static void radeon_write_pll_regs(struct radeonfb_info *rinfo, struct radeon_reg
radeon_pll_errata_after_data(rinfo);

/* Set PPLL ref. div */
- if (rinfo->family == CHIP_FAMILY_R300 ||
- rinfo->family == CHIP_FAMILY_RS300 ||
- rinfo->family == CHIP_FAMILY_R350 ||
- rinfo->family == CHIP_FAMILY_RV350) {
+ if (IS_R300_VARIANT(rinfo) || (rinfo->family == CHIP_FAMILY_RS300)) {
if (mode->ppll_ref_div & R300_PPLL_REF_DIV_ACC_MASK) {
/* When restoring console mode, use saved PPLL_REF_DIV
* setting.
@@ -1292,7 +1412,7 @@ static void radeon_write_pll_regs(struct radeonfb_info *rinfo, struct radeon_reg
} else {
/* R300 uses ref_div_acc field as real ref divider */
OUTPLLP(PPLL_REF_DIV,
- (mode->ppll_ref_div << R300_PPLL_REF_DIV_ACC_SHIFT),
+ (mode->ppll_ref_div << R300_PPLL_REF_DIV_ACC_SHIFT),
~R300_PPLL_REF_DIV_ACC_MASK);
}
} else
@@ -1380,6 +1500,7 @@ void radeon_write_mode (struct radeonfb_info *rinfo, struct radeon_regs *mode,
OUTREG(CRTC_OFFSET_CNTL, 0);
OUTREG(CRTC_PITCH, mode->crtc_pitch);
OUTREG(SURFACE_CNTL, mode->surface_cntl);
+ OUTREG(DISP_MERGE_CNTL, 0xffff0000);

radeon_write_pll_regs(rinfo, mode);

@@ -1890,7 +2011,7 @@ static int __devinit radeon_set_fbinfo (struct radeonfb_info *rinfo)
info->fix.ywrapstep = 0;
info->fix.type_aux = 0;
info->fix.mmio_start = rinfo->mmio_base_phys;
- info->fix.mmio_len = RADEON_REGSIZE;
+ info->fix.mmio_len = pci_resource_len(rinfo->pdev, 2);
info->fix.accel = FB_ACCEL_ATI_RADEON;

fb_alloc_cmap(&info->cmap, 256, 0);
@@ -1994,10 +2115,7 @@ static void radeon_identify_vram(struct radeonfb_info *rinfo)
u32 tmp;

/* framebuffer size */
- if ((rinfo->family == CHIP_FAMILY_RS100) ||
- (rinfo->family == CHIP_FAMILY_RS200) ||
- (rinfo->family == CHIP_FAMILY_RS300) ||
- (rinfo->family == CHIP_FAMILY_RS480) ) {
+ if (rinfo->is_IGP) {
u32 tom = INREG(NB_TOM);
tmp = ((((tom >> 16) - (tom & 0xffff) + 1) << 6) * 1024);

@@ -2025,6 +2143,10 @@ static void radeon_identify_vram(struct radeonfb_info *rinfo)
/* mem size is bits [28:0], mask off the rest */
rinfo->video_ram = tmp & CONFIG_MEMSIZE_MASK;

+ /* Limit memory to 128 megs for now */
+ if (rinfo->video_ram > MAX_VRAM)
+ rinfo->video_ram = MAX_VRAM;
+
/*
* Hack to get around some busted production M6's
* reporting no ram
@@ -2106,10 +2228,10 @@ static ssize_t radeon_show_edid1(struct kobject *kobj, char *buf, loff_t off, si
{
struct device *dev = container_of(kobj, struct device, kobj);
struct pci_dev *pdev = to_pci_dev(dev);
- struct fb_info *info = pci_get_drvdata(pdev);
- struct radeonfb_info *rinfo = info->par;
+ struct fb_info *info = pci_get_drvdata(pdev);
+ struct radeonfb_info *rinfo = info->par;

- return radeon_show_one_edid(buf, off, count, rinfo->mon1_EDID);
+ return radeon_show_one_edid(buf, off, count, rinfo->connectors[rinfo->heads[0]].edid);
}


@@ -2117,10 +2239,30 @@ static ssize_t radeon_show_edid2(struct kobject *kobj, char *buf, loff_t off, si
{
struct device *dev = container_of(kobj, struct device, kobj);
struct pci_dev *pdev = to_pci_dev(dev);
- struct fb_info *info = pci_get_drvdata(pdev);
- struct radeonfb_info *rinfo = info->par;
+ struct fb_info *info = pci_get_drvdata(pdev);
+ struct radeonfb_info *rinfo = info->par;
+
+ return radeon_show_one_edid(buf, off, count, rinfo->connectors[rinfo->heads[1]].edid);
+}
+
+static ssize_t radeon_show_edid3(struct kobject *kobj, char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct fb_info *info = pci_get_drvdata(pdev);
+ struct radeonfb_info *rinfo = info->par;
+
+ return radeon_show_one_edid(buf, off, count, rinfo->connectors[rinfo->heads[2]].edid);
+}
+
+static ssize_t radeon_show_edid4(struct kobject *kobj, char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct fb_info *info = pci_get_drvdata(pdev);
+ struct radeonfb_info *rinfo = info->par;

- return radeon_show_one_edid(buf, off, count, rinfo->mon2_EDID);
+ return radeon_show_one_edid(buf, off, count, rinfo->connectors[rinfo->heads[3]].edid);
}

static struct bin_attribute edid1_attr = {
@@ -2143,6 +2285,25 @@ static struct bin_attribute edid2_attr = {
.read = radeon_show_edid2,
};

+static struct bin_attribute edid3_attr = {
+ .attr = {
+ .name = "edid3",
+ .owner = THIS_MODULE,
+ .mode = 0444,
+ },
+ .size = EDID_LENGTH,
+ .read = radeon_show_edid3,
+};
+
+static struct bin_attribute edid4_attr = {
+ .attr = {
+ .name = "edid4",
+ .owner = THIS_MODULE,
+ .mode = 0444,
+ },
+ .size = EDID_LENGTH,
+ .read = radeon_show_edid4,
+};

static int __devinit radeonfb_pci_register (struct pci_dev *pdev,
const struct pci_device_id *ent)
@@ -2150,9 +2311,10 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev,
struct fb_info *info;
struct radeonfb_info *rinfo;
int ret;
+ int i;

RTRACE("radeonfb_pci_register BEGIN\n");
-
+
/* Enable device in PCI config */
ret = pci_enable_device(pdev);
if (ret < 0) {
@@ -2169,9 +2331,9 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev,
goto err_disable;
}
rinfo = info->par;
- rinfo->info = info;
+ rinfo->info = info;
rinfo->pdev = pdev;
-
+
spin_lock_init(&rinfo->reg_lock);
init_timer(&rinfo->lvds_timer);
rinfo->lvds_timer.function = radeon_lvds_timer_func;
@@ -2206,7 +2368,8 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev,
}

/* map the regions */
- rinfo->mmio_base = ioremap(rinfo->mmio_base_phys, RADEON_REGSIZE);
+ rinfo->mmio_base = ioremap(rinfo->mmio_base_phys,
+ pci_resource_len(rinfo->pdev, 2));
if (!rinfo->mmio_base) {
printk(KERN_ERR "radeonfb (%s): cannot map MMIO\n",
pci_name(rinfo->pdev));
@@ -2258,7 +2421,7 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev,
rinfo->mapped_vram = min_t(unsigned long, MAX_MAPPED_VRAM, rinfo->video_ram);

do {
- rinfo->fb_base = ioremap (rinfo->fb_base_phys,
+ rinfo->fb_base = ioremap(rinfo->fb_base_phys,
rinfo->mapped_vram);
} while ( rinfo->fb_base == 0 &&
((rinfo->mapped_vram /=2) >= MIN_MAPPED_VRAM) );
@@ -2293,6 +2456,7 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev,
* We probably need to make sure this is the primary display,
* but that is difficult without some arch support.
*/
+
#ifdef CONFIG_X86
if (rinfo->bios_seg == NULL)
radeon_find_mem_vbios(rinfo);
@@ -2304,14 +2468,23 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev,
if (rinfo->bios_seg == NULL && rinfo->is_mobility)
radeon_map_ROM(rinfo, pdev);

+ /* Check BIOS Type */
+ radeon_detect_bios_type(rinfo);
+
/* Get informations about the board's PLL */
- radeon_get_pllinfo(rinfo);
+ radeon_get_pll_info(rinfo);
+
+ /* Get informations about internal TMDS controller if any */
+ radeon_get_tmds_info(rinfo);

#ifdef CONFIG_FB_RADEON_I2C
/* Register I2C bus */
radeon_create_i2c_busses(rinfo);
#endif

+ /* Get infos about connectors -- need I2C here! */
+ radeon_get_conn_info(rinfo, ignore_conntable);
+
/* set all the vital stuff */
radeon_set_fbinfo (rinfo);

@@ -2322,10 +2495,15 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev,
radeon_check_modes(rinfo, mode_option);

/* Register some sysfs stuff (should be done better) */
- if (rinfo->mon1_EDID)
+
+ if ((rinfo->heads[0] != -1) && rinfo->connectors[rinfo->heads[0]].edid)
sysfs_create_bin_file(&rinfo->pdev->dev.kobj, &edid1_attr);
- if (rinfo->mon2_EDID)
+ if ((rinfo->heads[1] != -1) && rinfo->connectors[rinfo->heads[1]].edid)
sysfs_create_bin_file(&rinfo->pdev->dev.kobj, &edid2_attr);
+ if ((rinfo->heads[2] != -1) && rinfo->connectors[rinfo->heads[2]].edid)
+ sysfs_create_bin_file(&rinfo->pdev->dev.kobj, &edid3_attr);
+ if ((rinfo->heads[3] != -1) && rinfo->connectors[rinfo->heads[3]].edid)
+ sysfs_create_bin_file(&rinfo->pdev->dev.kobj, &edid4_attr);

/* save current mode regs before we switch into the new one
* so we can restore this upon __exit
@@ -2371,10 +2549,12 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev,
err_unmap_fb:
iounmap(rinfo->fb_base);
err_unmap_rom:
- kfree(rinfo->mon1_EDID);
- kfree(rinfo->mon2_EDID);
- if (rinfo->mon1_modedb)
- fb_destroy_modedb(rinfo->mon1_modedb);
+ for (i = 0 ; i < RADEON_MAX_CONNECTORS ; i++) {
+ kfree(rinfo->connectors[i].edid);
+ if (rinfo->connectors[i].modedb)
+ fb_destroy_modedb(rinfo->connectors[i].modedb);
+ }
+
fb_dealloc_cmap(&info->cmap);
#ifdef CONFIG_FB_RADEON_I2C
radeon_delete_i2c_busses(rinfo);
@@ -2387,7 +2567,7 @@ err_release_pci2:
err_release_pci0:
pci_release_region(pdev, 0);
err_release_fb:
- framebuffer_release(info);
+ framebuffer_release(info);
err_disable:
err_out:
return ret;
@@ -2399,16 +2579,21 @@ static void __devexit radeonfb_pci_unregister (struct pci_dev *pdev)
{
struct fb_info *info = pci_get_drvdata(pdev);
struct radeonfb_info *rinfo = info->par;
+ int i;

if (!rinfo)
return;

radeonfb_pm_exit(rinfo);

- if (rinfo->mon1_EDID)
+ if ((rinfo->heads[0] != -1) && rinfo->connectors[rinfo->heads[0]].edid)
sysfs_remove_bin_file(&rinfo->pdev->dev.kobj, &edid1_attr);
- if (rinfo->mon2_EDID)
+ if ((rinfo->heads[1] != -1) && rinfo->connectors[rinfo->heads[1]].edid)
sysfs_remove_bin_file(&rinfo->pdev->dev.kobj, &edid2_attr);
+ if ((rinfo->heads[2] != -1) && rinfo->connectors[rinfo->heads[2]].edid)
+ sysfs_remove_bin_file(&rinfo->pdev->dev.kobj, &edid3_attr);
+ if ((rinfo->heads[3] != -1) && rinfo->connectors[rinfo->heads[3]].edid)
+ sysfs_remove_bin_file(&rinfo->pdev->dev.kobj, &edid4_attr);

#if 0
/* restore original state
@@ -2437,13 +2622,14 @@ static void __devexit radeonfb_pci_unregister (struct pci_dev *pdev)
pci_release_region(pdev, 2);
pci_release_region(pdev, 0);

- kfree(rinfo->mon1_EDID);
- kfree(rinfo->mon2_EDID);
- if (rinfo->mon1_modedb)
- fb_destroy_modedb(rinfo->mon1_modedb);
+ for (i = 0; i < RADEON_MAX_CONNECTORS; i++) {
+ kfree(rinfo->connectors[i].edid);
+ if (rinfo->connectors[i].modedb)
+ fb_destroy_modedb(rinfo->connectors[i].modedb);
+ }
#ifdef CONFIG_FB_RADEON_I2C
radeon_delete_i2c_busses(rinfo);
-#endif
+#endif
fb_dealloc_cmap(&info->cmap);
framebuffer_release(info);
}
@@ -2492,12 +2678,18 @@ static int __init radeonfb_setup (char *options)
force_measure_pll = 1;
} else if (!strncmp(this_opt, "ignore_edid", 11)) {
ignore_edid = 1;
+ } else if (!strncmp(this_opt, "ignore_conntable", 16)) {
+ ignore_conntable = 1;
+ } else if (!strncmp( this_opt, "default_dynclk:", 15)) {
+ default_dynclk = simple_strtoul((this_opt+15), NULL, 10);
#if defined(CONFIG_PM) && defined(CONFIG_X86)
- } else if (!strncmp(this_opt, "force_sleep", 11)) {
+ } else if (!strncmp(this_opt, "force_sleep", 11)) {
force_sleep = 1;
} else if (!strncmp(this_opt, "ignore_devlist", 14)) {
ignore_devlist = 1;
#endif
+ } else if (!strncmp(this_opt, "debug", 5)) {
+ radeonfb_debug = 1;
} else
mode_option = this_opt;
}
@@ -2541,6 +2733,8 @@ module_param(force_dfp, bool, 0);
MODULE_PARM_DESC(force_dfp, "bool: force display to dfp");
module_param(ignore_edid, bool, 0);
MODULE_PARM_DESC(ignore_edid, "bool: Ignore EDID data when doing DDC probe");
+module_param(ignore_conntable, bool, 0);
+MODULE_PARM_DESC(ignore_conntable, "bool: Ignore BIOS Connector table");
module_param(monitor_layout, charp, 0);
MODULE_PARM_DESC(monitor_layout, "Specify monitor mapping (like XFree86)");
module_param(force_measure_pll, bool, 0);
@@ -2559,3 +2753,5 @@ MODULE_PARM_DESC(force_sleep, "bool: force D2 sleep mode on all hardware");
module_param(ignore_devlist, bool, 0);
MODULE_PARM_DESC(ignore_devlist, "bool: ignore workarounds for bugs in specific laptops");
#endif
+module_param(radeonfb_debug, int, 0);
+MODULE_PARM_DESC(radeonfb_debug, "Enable full debugging text");
diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/aty/radeon_i2c.c
index 7db9de6..e4bc267 100644
--- a/drivers/video/aty/radeon_i2c.c
+++ b/drivers/video/aty/radeon_i2c.c
@@ -134,35 +134,57 @@ void radeon_delete_i2c_busses(struct radeonfb_info *rinfo)
rinfo->i2c[3].rinfo = NULL;
}

-int radeon_probe_i2c_connector(struct radeonfb_info *rinfo, int conn,
- u8 **out_edid)
+
+int radeon_probe_i2c_connector(struct radeonfb_info *rinfo, struct radeon_connector *conn)
{
- u32 reg = rinfo->i2c[conn-1].ddc_reg;
+ int mon_type = MT_NONE;
u8 *edid;

- OUTREG(reg, INREG(reg) &
- ~(VGA_DDC_DATA_OUTPUT | VGA_DDC_CLK_OUTPUT));
+ if (!conn)
+ return 1;
+
+ if (rinfo->is_mobility && (conn->ddc_type == ddc_none) &&
+ (INREG(LVDS_GEN_CNTL) & (LVDS_ON|LVDS_EN))) {
+ RTRACE("radeonfb: I2C (port %d) ... found LVDS panel\n", conn->ddc_type);
+ mon_type = MT_LCD;
+ edid = NULL;
+ goto done;
+ }

- edid = fb_ddc_read(&rinfo->i2c[conn-1].adapter);
+ if (conn->ddc_type == ddc_none)
+ return 1;
+ edid = fb_ddc_read(&rinfo->i2c[conn->ddc_type].adapter);

- if (out_edid)
- *out_edid = edid;
if (!edid) {
- RTRACE("radeonfb: I2C (port %d) ... not found\n", conn);
- return MT_NONE;
+ /* what about the special case where we are a DFP/LVDS, but have a DDC connection
+ * but no EDID? We should fall back to MT_LCD...? XXXX
+ */
+ RTRACE("radeonfb: I2C (port %d) ... not found\n", conn->ddc_type);
+ mon_type = MT_NONE;
+ goto done;
+ }
+ if ((edid[EDID_STRUCT_DISPLAY] & 0x80) && (conn->ddc_type == ddc_dvi)) {
+ RTRACE("radeonfb: I2C (port %d) ... found TMDS panel\n", conn->ddc_type);
+ mon_type = MT_DFP;
+ goto done;
}
- if (edid[0x14] & 0x80) {
- /* Fix detection using BIOS tables */
- if (rinfo->is_mobility /*&& conn == ddc_dvi*/ &&
- (INREG(LVDS_GEN_CNTL) & LVDS_ON)) {
- RTRACE("radeonfb: I2C (port %d) ... found LVDS panel\n", conn);
- return MT_LCD;
- } else {
- RTRACE("radeonfb: I2C (port %d) ... found TMDS panel\n", conn);
- return MT_DFP;
- }
+
+ if (rinfo->is_mobility &&
+ (conn->conn_type == conn_lvds) &&
+ (edid[EDID_STRUCT_DISPLAY] & 0x80) && // ie EDID valid and marks us as a DFP...
+ (INREG(LVDS_GEN_CNTL) & (LVDS_ON|LVDS_EN))) {
+ RTRACE("radeonfb: I2C (port %d) ... found LVDS panel\n", conn->ddc_type);
+ mon_type = MT_LCD;
+ goto done;
}
- RTRACE("radeonfb: I2C (port %d) ... found CRT display\n", conn);
- return MT_CRT;
+
+ RTRACE("radeonfb: I2C (port %d) ... found CRT display\n", conn->ddc_type);
+ mon_type = MT_CRT;
+
+done:
+ conn->edid = edid;
+ conn->mon_type = mon_type;
+
+ return (mon_type == MT_NONE);
}

diff --git a/drivers/video/aty/radeon_monitor.c b/drivers/video/aty/radeon_monitor.c
index 2030ed8..1b646d1 100644
--- a/drivers/video/aty/radeon_monitor.c
+++ b/drivers/video/aty/radeon_monitor.c
@@ -1,6 +1,29 @@
#include "radeonfb.h"
#include "../edid.h"

+/*
+ * TMDS PLL configuration table, taken from X.org
+ */
+static const struct radeon_tmds_pll_info default_tmds_pll[CHIP_FAMILY_LAST][4] =
+{
+ {{0, 0}, {0, 0}, {0, 0}, {0, 0}}, /*CHIP_FAMILY_UNKNOW*/
+ {{0, 0}, {0, 0}, {0, 0}, {0, 0}}, /*CHIP_FAMILY_LEGACY*/
+ {{12000, 0xa1b}, {0xffffffff, 0xa3f}, {0, 0}, {0, 0}}, /*CHIP_FAMILY_RADEON*/
+ {{12000, 0xa1b}, {0xffffffff, 0xa3f}, {0, 0}, {0, 0}}, /*CHIP_FAMILY_RV100*/
+ {{0, 0}, {0, 0}, {0, 0}, {0, 0}}, /*CHIP_FAMILY_RS100*/
+ {{15000, 0xa1b}, {0xffffffff, 0xa3f}, {0, 0}, {0, 0}}, /*CHIP_FAMILY_RV200*/
+ {{12000, 0xa1b}, {0xffffffff, 0xa3f}, {0, 0}, {0, 0}}, /*CHIP_FAMILY_RS200*/
+ {{15000, 0xa1b}, {0xffffffff, 0xa3f}, {0, 0}, {0, 0}}, /*CHIP_FAMILY_R200*/
+ {{15500, 0x81b}, {0xffffffff, 0x83f}, {0, 0}, {0, 0}}, /*CHIP_FAMILY_RV250*/
+ {{0, 0}, {0, 0}, {0, 0}, {0, 0}}, /*CHIP_FAMILY_RS300*/
+ {{13000, 0x400f4}, {15000, 0x400f7}, {0xffffffff, 0x400f7}, {0, 0}}, /*CHIP_FAMILY_RV280*/
+ {{0xffffffff, 0xb01cb}, {0, 0}, {0, 0}, {0, 0}}, /*CHIP_FAMILY_R300*/
+ {{0xffffffff, 0xb01cb}, {0, 0}, {0, 0}, {0, 0}}, /*CHIP_FAMILY_R350*/
+ {{15000, 0xb0155}, {0xffffffff, 0xb01cb}, {0, 0}, {0, 0}}, /*CHIP_FAMILY_RV350*/
+ {{15000, 0xb0155}, {0xffffffff, 0xb01cb}, {0, 0}, {0, 0}}, /*CHIP_FAMILY_RV380*/
+ {{0xffffffff, 0xb01cb}, {0, 0}, {0, 0}, {0, 0}}, /*CHIP_FAMILY_R420*/
+};
+
static struct fb_var_screeninfo radeonfb_default_var = {
.xres = 640,
.yres = 480,
@@ -23,35 +46,311 @@ static struct fb_var_screeninfo radeonfb_default_var = {
.vmode = FB_VMODE_NONINTERLACED
};

-static char *radeon_get_mon_name(int type)
+
+int __devinit radeon_get_lvds_info_atom(struct radeonfb_info *rinfo)
{
- char *pret = NULL;
+ unsigned long tmp;

- switch (type) {
- case MT_NONE:
- pret = "no";
- break;
- case MT_CRT:
- pret = "CRT";
- break;
- case MT_DFP:
- pret = "DFP";
- break;
- case MT_LCD:
- pret = "LCD";
- break;
- case MT_CTV:
- pret = "CTV";
- break;
- case MT_STV:
- pret = "STV";
+ if (!rinfo->bios_seg)
+ return -ENODEV;
+
+ tmp = BIOS_IN16(rinfo->atom_data_start + 16);
+ if (!tmp) {
+ RTRACE("No LVDS panel info in ATOM BIOS\n");
+ rinfo->panel_info.pwr_delay = 200;
+ return -ENODEV;
+ }
+
+ rinfo->panel_info.xres = BIOS_IN16(tmp+6);
+ rinfo->panel_info.yres = BIOS_IN16(tmp+10);
+ printk("radeonfb: detected LVDS panel size from BIOS: %dx%d\n",
+ rinfo->panel_info.xres, rinfo->panel_info.yres);
+ rinfo->panel_info.pwr_delay = BIOS_IN16(tmp+40);
+ RTRACE("BIOS provided panel power delay: %d\n", rinfo->panel_info.pwr_delay);
+ if (rinfo->panel_info.pwr_delay > 2000 || rinfo->panel_info.pwr_delay <= 0)
+ rinfo->panel_info.pwr_delay = 2000;
+
+ /* No special divider combinations? */
+
+ rinfo->panel_info.hblank = BIOS_IN16(tmp+8);
+ rinfo->panel_info.hOver_plus = BIOS_IN16(tmp+14);
+ rinfo->panel_info.hSync_width = BIOS_IN16(tmp+16);
+ rinfo->panel_info.vblank = BIOS_IN16(tmp+12);
+ rinfo->panel_info.vOver_plus = BIOS_IN16(tmp+18);
+ rinfo->panel_info.vSync_width = BIOS_IN16(tmp+20);
+ rinfo->panel_info.clock = BIOS_IN16(tmp+4);
+
+ /* Assume high active syncs for now until ATI tells me more... maybe we
+ * can probe register values here ?
+ */
+ rinfo->panel_info.hAct_high = 1;
+ rinfo->panel_info.vAct_high = 1;
+ /* Mark panel infos valid */
+ rinfo->panel_info.valid = 1;
+
+ return 0;
+}
+
+int __devinit radeon_get_lvds_info_legacy(struct radeonfb_info *rinfo)
+{
+ unsigned long tmp, tmp0;
+ char stmp[30];
+ int i;
+
+ if (!rinfo->bios_seg)
+ return -ENODEV;
+
+ if (!(tmp = BIOS_IN16(rinfo->fp_bios_start + 0x40))) {
+ RTRACE("No LVDS panel info in Legacy BIOS\n");
+ rinfo->panel_info.pwr_delay = 200;
+ return -ENODEV;
+ }
+
+ for(i = 0; i < 24; i++)
+ stmp[i] = BIOS_IN8(tmp + i + 1);
+ stmp[24] = 0;
+ printk("radeonfb: panel ID string: %s\n", stmp);
+ rinfo->panel_info.xres = BIOS_IN16(tmp + 25);
+ rinfo->panel_info.yres = BIOS_IN16(tmp + 27);
+ printk("radeonfb: detected LVDS panel size from BIOS: %dx%d\n",
+ rinfo->panel_info.xres, rinfo->panel_info.yres);
+
+ rinfo->panel_info.pwr_delay = BIOS_IN16(tmp + 44);
+ RTRACE("BIOS provided panel power delay: %d\n", rinfo->panel_info.pwr_delay);
+ if (rinfo->panel_info.pwr_delay > 2000 || rinfo->panel_info.pwr_delay <= 0)
+ rinfo->panel_info.pwr_delay = 2000;
+
+ /*
+ * Some panels only work properly with some divider combinations
+ */
+ rinfo->panel_info.ref_divider = BIOS_IN16(tmp + 46);
+ rinfo->panel_info.post_divider = BIOS_IN8(tmp + 48);
+ rinfo->panel_info.fbk_divider = BIOS_IN16(tmp + 49);
+ if (rinfo->panel_info.ref_divider != 0 &&
+ rinfo->panel_info.fbk_divider > 3) {
+ rinfo->panel_info.use_bios_dividers = 1;
+ printk(KERN_INFO "radeondb: BIOS provided dividers will be used\n");
+ RTRACE("ref_divider = %x\n", rinfo->panel_info.ref_divider);
+ RTRACE("post_divider = %x\n", rinfo->panel_info.post_divider);
+ RTRACE("fbk_divider = %x\n", rinfo->panel_info.fbk_divider);
+ }
+
+ RTRACE("Scanning BIOS table ...\n");
+ for(i = 0; i < 32; i++) {
+ tmp0 = BIOS_IN16(tmp + 64 + i*2);
+ if (tmp0 == 0)
break;
+ RTRACE(" %d x %d\n", BIOS_IN16(tmp0), BIOS_IN16(tmp0 + 2));
+ if ((BIOS_IN16(tmp0) == rinfo->panel_info.xres) &&
+ (BIOS_IN16(tmp0 + 2) == rinfo->panel_info.yres)) {
+ rinfo->panel_info.hblank = (BIOS_IN16(tmp0 + 17) - BIOS_IN16(tmp0 + 19)) * 8;
+ rinfo->panel_info.hOver_plus = ((BIOS_IN16(tmp0 + 21) -
+ BIOS_IN16(tmp0 + 19) -1) * 8) & 0x7fff;
+ rinfo->panel_info.hSync_width = BIOS_IN8(tmp0 + 23) * 8;
+ rinfo->panel_info.vblank = BIOS_IN16(tmp0 + 24) - BIOS_IN16(tmp0 + 26);
+ rinfo->panel_info.vOver_plus = (BIOS_IN16(tmp0 + 28) & 0x7ff) - BIOS_IN16(tmp0 + 26);
+ rinfo->panel_info.vSync_width = (BIOS_IN16(tmp0 + 28) & 0xf800) >> 11;
+ rinfo->panel_info.clock = BIOS_IN16(tmp0 + 9);
+ /* Assume high active syncs for now until ATI tells me more... maybe we
+ * can probe register values here ?
+ */
+ rinfo->panel_info.hAct_high = 1;
+ rinfo->panel_info.vAct_high = 1;
+ /* Mark panel infos valid */
+ rinfo->panel_info.valid = 1;
+
+ RTRACE("Found panel in BIOS table:\n");
+ RTRACE(" hblank: %d\n", rinfo->panel_info.hblank);
+ RTRACE(" hOver_plus: %d\n", rinfo->panel_info.hOver_plus);
+ RTRACE(" hSync_width: %d\n", rinfo->panel_info.hSync_width);
+ RTRACE(" vblank: %d\n", rinfo->panel_info.vblank);
+ RTRACE(" vOver_plus: %d\n", rinfo->panel_info.vOver_plus);
+ RTRACE(" vSync_width: %d\n", rinfo->panel_info.vSync_width);
+ RTRACE(" clock: %d\n", rinfo->panel_info.clock);
+
+ return 0;
+ }
+ }
+
+ RTRACE("Didn't find panel in BIOS table !\n");
+
+ return -ENODEV;
+}
+
+/*
+ * Get informations about TMDS controllers and their setup at
+ * different operating frequencies
+ */
+void __devinit radeon_get_tmds_info(struct radeonfb_info *rinfo)
+{
+ int i;
+ int family = rinfo->family;
+
+ /* Get default TMDS infos for this chip */
+ for (i = 0; i < 4; i++) {
+ rinfo->tmds_pll[i].value = default_tmds_pll[family][i].value;
+ rinfo->tmds_pll[i].freq = default_tmds_pll[family][i].freq;
+ }
+
+ /* Get whatever the firmware provides */
+ if (rinfo->radeon_get_tmds_info) {
+ rinfo->radeon_get_tmds_info(rinfo);
+ // XXX Do we care about the return value?
+ }
+}
+
+int __devinit radeon_get_tmds_info_legacy(struct radeonfb_info *rinfo)
+{
+ int offset, i, n, rev;
+
+ offset = BIOS_IN16(rinfo->fp_bios_start + 0x34);
+ if (offset == 0)
+ return -ENODEV;
+
+ rev = BIOS_IN8(offset);
+ RTRACE("DFP table revision: %d\n", rev);
+
+ switch(rev) {
+ case 3:
+ n = BIOS_IN8(offset + 5) + 1;
+ if (n > 4)
+ n = 4;
+ for (i = 0; i < n; i++) {
+ /* Looks bogus ... but that's what is in X.org */
+ rinfo->tmds_pll[i].value =
+ BIOS_IN32(offset + i*10 + 0x08);
+ rinfo->tmds_pll[i].freq =
+ BIOS_IN16(offset + i*10 + 0x10);
+ }
+ return 0;
+
+ /* revision 4 has some problem as it appears in RV280,
+ * comment it off for now, use default instead
+ */
+#if 0
+ case 4:
+ stride = 0;
+ n = BIOS_IN8(offset 5) + 1;
+ if (n > 4)
+ n = 4;
+ for (i = 0; i < n; i++) {
+ rinfo->tmds_pll[i].value =
+ BIOS_IN32(tmp + stride + 0x08);
+ rinfo->tmds_pll[i].freq =
+ BIOS_IN16(tmp + stride + 0x10);
+ if (i == 0)
+ stride += 10;
+ else
+ stride += 6;
+ }
+ return 0;
+#endif
}
+ return -ENODEV;
+}
+
+int __devinit radeon_get_tmds_info_atom(struct radeonfb_info *rinfo)
+{
+ int offset, i, maxfreq;
+
+ offset = BIOS_IN16(rinfo->atom_data_start + 18);
+ if (offset == 0)
+ return -ENODEV;

- return pret;
+ maxfreq = BIOS_IN16(offset + 4);
+
+ for (i = 0; i < 4; i++) {
+ rinfo->tmds_pll[i].freq = BIOS_IN16(offset + i*6 + 6);
+ /* This assumes each field in TMDS_PLL has 6 bit as
+ * in R300/R420
+ */
+ rinfo->tmds_pll[i].value =
+ ((BIOS_IN8(offset + i*6 + 8) & 0x3f) |
+ ((BIOS_IN8(offset + i*6 + 10) & 0x3f)<<6) |
+ ((BIOS_IN8(offset + i*6 + 9) & 0xf)<<12) |
+ ((BIOS_IN8(offset + i*6 + 11) & 0xf)<<16));
+ RTRACE("TMDS PLL from BIOS: %ld %x\n",
+ rinfo->tmds_pll[i].freq, rinfo->tmds_pll[i].value);
+
+ if (maxfreq == rinfo->tmds_pll[i].freq) {
+ rinfo->tmds_pll[i].freq = 0xffffffff;
+ break;
+ }
+ }
+ return 0;
}


+static const char *conn_type_name[] = {
+ "NONE", "VGA", "DVI-I", "DVI-D", "DVI-A", "S-Video",
+ "Composite Video", "Internal Panel", "Digital",
+ "Unsupported", "Proprietary"
+};
+
+static const char *mon_type_name[] = {
+ "None", "CRT", "LVDS Flat panel",
+ "DVI Flat panel", "Composite TV", "S-Video TV"
+};
+
+static void __devinit radeon_fill_conn(struct radeon_connector *conn, int mon_type, int ddc_type, int *found_tmds, int *found_crt)
+{
+ conn->mon_type = mon_type;
+ conn->ddc_type = ddc_type;
+
+ // XXX what about reversed DAC/TMDS??
+
+ switch(mon_type) {
+ case MT_CRT:
+ conn->conn_type = conn_vga;
+ conn->tmds_type = tmds_unknown;
+ conn->dac_type = (*found_crt) ? dac_tvdac: dac_primary;
+ if (ddc_type == ddc_none)
+ conn->ddc_type = (*found_crt) ? ddc_crt2 : ddc_vga;
+ *found_crt = 1;
+ break;
+ case MT_DFP:
+ conn->conn_type = conn_dvi_i;
+ conn->tmds_type = (*found_tmds) ? tmds_external: tmds_internal;
+ conn->dac_type = dac_unknown;
+ if (ddc_type == ddc_none)
+ conn->ddc_type = ddc_dvi;
+ *found_tmds = 1;
+ break;
+ case MT_LCD:
+ conn->conn_type = conn_lvds;
+ conn->tmds_type = tmds_unknown;
+ conn->dac_type = dac_unknown;
+ if (ddc_type == ddc_none)
+ conn->ddc_type = ddc_none; //heh
+ break;
+ case MT_CTV:
+ conn->conn_type = conn_ctv;
+ conn->tmds_type = tmds_unknown;
+ conn->dac_type = dac_tvdac;
+ if (ddc_type == ddc_none)
+ conn->ddc_type = ddc_vga; // XXX ddc_crt2?
+ break;
+ case MT_STV:
+ conn->conn_type = conn_stv;
+ conn->tmds_type = tmds_unknown;
+ conn->dac_type = dac_tvdac;
+ if (ddc_type == ddc_none)
+ conn->ddc_type = ddc_vga; // XXX ddc_crt2?
+ break;
+ case MT_UNKNOWN:
+ case MT_NONE:
+ conn->conn_type = conn_none;
+ conn->tmds_type = tmds_unknown;
+ conn->mon_type = MT_NONE;
+ conn->ddc_type = ddc_none;
+ conn->dac_type = dac_unknown;
+ break;
+ default:
+ break;
+ }
+ // leaves conn_digital, conn_unsupported, conn_propritetary
+}
+
#if defined(CONFIG_PPC_OF) || defined(CONFIG_SPARC)
/*
* Try to find monitor informations & EDID data out of the Open Firmware
@@ -59,33 +358,40 @@ static char *radeon_get_mon_name(int type)
* models with broken OF probing by hard-coding known EDIDs for some Mac
* laptops internal LVDS panel. (XXX: not done yet)
*/
-static int __devinit radeon_parse_montype_prop(struct device_node *dp, u8 **out_EDID,
+static int __devinit radeon_parse_montype_prop(struct radeonfb_info *rinfo,
+ struct device_node *dp,
+ struct radeon_connector *conn,
int hdno)
{
- static char *propnames[] = { "DFP,EDID", "LCD,EDID", "EDID",
+ static char *propnames[] = { "DFP,EDID", "LCD,EDID", "EDID",
"EDID1", "EDID2", NULL };
const u8 *pedid = NULL;
const u8 *pmt = NULL;
u8 *tmp;
- int i, mt = MT_NONE;
-
+ int i;
+
RTRACE("analyzing OF properties...\n");
pmt = of_get_property(dp, "display-type", NULL);
if (!pmt)
- return MT_NONE;
+ return -1;
RTRACE("display-type: %s\n", pmt);
- /* OF says "LCD" for DFP as well, we discriminate from the caller of this
- * function
- */
- if (!strcmp(pmt, "LCD") || !strcmp(pmt, "DFP"))
- mt = MT_DFP;
- else if (!strcmp(pmt, "CRT"))
- mt = MT_CRT;
- else {
+ if (!strcmp(pmt, "LCD") || !strcmp(pmt, "DFP")) {
+ /* OF says "LCD" for DFP as well.*/
+ if (rinfo->is_mobility) {
+ conn->mon_type = MT_LCD;
+ /* Maybe check for LVDS_GEN_CNTL here ? I need to check out
+ * what OF does when booting with lid closed
+ */
+ } else{
+ conn->mon_type = MT_DFP;
+ }
+ } else if (!strcmp(pmt, "CRT")) {
+ conn->mon_type = MT_CRT;
+ } else {
if (strcmp(pmt, "NONE") != 0)
printk(KERN_WARNING "radeonfb: Unknown OF display-type: %s\n",
pmt);
- return MT_NONE;
+ return -1;
}

for (i = 0; propnames[i] != NULL; ++i) {
@@ -103,25 +409,36 @@ static int __devinit radeon_parse_montype_prop(struct device_node *dp, u8 **out_
if (pedid == NULL && dp->parent && (hdno == 0))
pedid = of_get_property(dp->parent, "EDID", NULL);
if (pedid == NULL)
- return mt;
+ return -1;

tmp = kmemdup(pedid, EDID_LENGTH, GFP_KERNEL);
- if (!tmp)
- return mt;
- *out_EDID = tmp;
- return mt;
+ conn->edid = tmp;
+
+ {
+ int found_tmds = 0;
+ int found_crt = 0;
+ int ddc_type = ddc_none;
+ // XXX what about reversed DAC/TMDS??
+ radeon_fill_conn(conn, conn->mon_type, ddc_type, &found_crt, &found_tmds);
+ }
+
+ return 0;
}

-static int __devinit radeon_probe_OF_head(struct radeonfb_info *rinfo, int head_no,
- u8 **out_EDID)
+/* return a -1 on error */
+static int __devinit radeon_probe_OF_head(struct radeonfb_info *rinfo, int head_no)
+
{
- struct device_node *dp;
+ struct radeon_connector *conn;
+ struct device_node *dp;

RTRACE("radeon_probe_OF_head\n");

- dp = rinfo->of_node;
- while (dp == NULL)
- return MT_NONE;
+ conn = &rinfo->connectors[head_no];
+
+ dp = rinfo->of_node;
+ if (dp == NULL)
+ return -1;

if (rinfo->has_CRTC2) {
const char *pname;
@@ -130,116 +447,284 @@ static int __devinit radeon_probe_OF_head(struct radeonfb_info *rinfo, int head_
dp = dp->child;
do {
if (!dp)
- return MT_NONE;
+ return -1;
+
pname = of_get_property(dp, "name", NULL);
- if (!pname)
- return MT_NONE;
+ if (!pname)
+ return -1;
+
len = strlen(pname);
RTRACE("head: %s (letter: %c, head_no: %d)\n",
pname, pname[len-1], head_no);
if (pname[len-1] == 'A' && head_no == 0) {
- int mt = radeon_parse_montype_prop(dp, out_EDID, 0);
- /* Maybe check for LVDS_GEN_CNTL here ? I need to check out
- * what OF does when booting with lid closed
- */
- if (mt == MT_DFP && rinfo->is_mobility)
- mt = MT_LCD;
- return mt;
- } else if (pname[len-1] == 'B' && head_no == 1)
- return radeon_parse_montype_prop(dp, out_EDID, 1);
+ return radeon_parse_montype_prop(rinfo, dp, conn, 0);
+ } else if (pname[len-1] == 'B' && head_no == 1) {
+ return radeon_parse_montype_prop(rinfo, dp, conn, 1);
+ }
second = 1;
dp = dp->sibling;
} while(!second);
} else {
if (head_no > 0)
- return MT_NONE;
- return radeon_parse_montype_prop(dp, out_EDID, -1);
+ return -1;
+ return radeon_parse_montype_prop(rinfo, dp, conn, -1);
}
- return MT_NONE;
+ return -1;
}
#endif /* CONFIG_PPC_OF || CONFIG_SPARC */

-
-static int __devinit radeon_get_panel_info_BIOS(struct radeonfb_info *rinfo)
+/*
+ * Get informations about the various connectors on this card. This is
+ * the most prone to fail function as various firmwares tend to say
+ * crap or not give any info at all. The Open Firmware version is just
+ * a table of known cards for now for example. We'll probably need some
+ * additional module params to force different settings in case of
+ * misdetection here.
+ *
+ * This doesn _not_ try actual probing of whatever is plugged on those
+ * various connectors. This will be done later. We do store whatever
+ * probing info the firmware gives us though
+ */
+void __devinit radeon_get_conn_info(struct radeonfb_info *rinfo, int ignore_conntable)
{
- unsigned long tmp, tmp0;
- char stmp[30];
int i;

- if (!rinfo->bios_seg)
- return 0;
-
- if (!(tmp = BIOS_IN16(rinfo->fp_bios_start + 0x40))) {
- printk(KERN_ERR "radeonfb: Failed to detect DFP panel info using BIOS\n");
- rinfo->panel_info.pwr_delay = 200;
- return 0;
+ /* Clear table */
+ for (i = 0; i < RADEON_MAX_CONNECTORS; i++) {
+ rinfo->connectors[i].conn_type = conn_none;
+ rinfo->connectors[i].ddc_type = ddc_none;
+ rinfo->connectors[i].dac_type = dac_unknown;
+ rinfo->connectors[i].tmds_type = tmds_unknown;
+ rinfo->connectors[i].mon_type = MT_UNKNOWN;
+ rinfo->connectors[i].head = -1;
+ rinfo->heads[i] = -1;
}
+ rinfo->num_heads = 0;
+
+ if (ignore_conntable) {
+#if defined(CONFIG_FB_RADEON_I2C)
+ struct radeon_connector conn;
+ int idx = 0;
+ int found_tmds = 0;
+ int found_crt = 0;
+
+ // XXX what about reversed DAC/TMDS??
+
+ for (i = 0; i < 4; i++) {
+ conn.ddc_type = i;
+ if (!radeon_probe_i2c_connector(rinfo, &conn)) {
+ radeon_fill_conn(&rinfo->connectors[idx++], conn.mon_type, conn.ddc_type,
+ &found_tmds, &found_crt);
+ }
+ }

- for(i=0; i<24; i++)
- stmp[i] = BIOS_IN8(tmp+i+1);
- stmp[24] = 0;
- printk("radeonfb: panel ID string: %s\n", stmp);
- rinfo->panel_info.xres = BIOS_IN16(tmp + 25);
- rinfo->panel_info.yres = BIOS_IN16(tmp + 27);
- printk("radeonfb: detected LVDS panel size from BIOS: %dx%d\n",
- rinfo->panel_info.xres, rinfo->panel_info.yres);
+ /* If we failed to probe something.. */
+ if (idx)
+ goto found;
+#endif /* CONFIG_FB_RADEON_I2C */
+ } else {
+ /* Try to obtain infos from firmware */
+ if (rinfo->radeon_get_conn_info) {
+ if (!rinfo->radeon_get_conn_info(rinfo)) {
+ goto found;
+ }
+ }
+ }

- rinfo->panel_info.pwr_delay = BIOS_IN16(tmp + 44);
- RTRACE("BIOS provided panel power delay: %d\n", rinfo->panel_info.pwr_delay);
- if (rinfo->panel_info.pwr_delay > 2000 || rinfo->panel_info.pwr_delay <= 0)
- rinfo->panel_info.pwr_delay = 2000;
+ printk(KERN_INFO "radeonfb: No connector infos, using defaults...\n");

- /*
- * Some panels only work properly with some divider combinations
+ /* Here, we use defaults that are common enough ... we hope
+ * For a mobility chip, we assume LVDS is on primary
*/
- rinfo->panel_info.ref_divider = BIOS_IN16(tmp + 46);
- rinfo->panel_info.post_divider = BIOS_IN8(tmp + 48);
- rinfo->panel_info.fbk_divider = BIOS_IN16(tmp + 49);
- if (rinfo->panel_info.ref_divider != 0 &&
- rinfo->panel_info.fbk_divider > 3) {
- rinfo->panel_info.use_bios_dividers = 1;
- printk(KERN_INFO "radeondb: BIOS provided dividers will be used\n");
- RTRACE("ref_divider = %x\n", rinfo->panel_info.ref_divider);
- RTRACE("post_divider = %x\n", rinfo->panel_info.post_divider);
- RTRACE("fbk_divider = %x\n", rinfo->panel_info.fbk_divider);
+ if (rinfo->is_mobility) {
+ rinfo->connectors[0].conn_type = conn_lvds;
+ rinfo->connectors[0].ddc_type = ddc_dvi;
+ rinfo->connectors[0].dac_type = dac_primary;
+ rinfo->connectors[0].tmds_type = tmds_unknown;
+ rinfo->connectors[0].mon_type = MT_UNKNOWN;
+
+ rinfo->connectors[1].conn_type = conn_dvi_d;
+ rinfo->connectors[1].ddc_type = ddc_vga;
+ rinfo->connectors[1].dac_type = dac_primary;
+ rinfo->connectors[1].tmds_type = tmds_internal;
+ rinfo->connectors[1].mon_type = MT_UNKNOWN;
+
+ rinfo->connectors[2].conn_type = conn_stv;
+ rinfo->connectors[2].ddc_type = ddc_none;
+ rinfo->connectors[2].dac_type = dac_tvdac;
+ rinfo->connectors[2].tmds_type = tmds_unknown;
+ rinfo->connectors[2].mon_type = MT_UNKNOWN;
+ } else {
+ rinfo->connectors[0].conn_type = conn_dvi_d;
+ rinfo->connectors[0].ddc_type = ddc_dvi;
+ rinfo->connectors[0].dac_type = dac_tvdac;
+ rinfo->connectors[0].tmds_type = tmds_internal;
+ rinfo->connectors[0].mon_type = MT_UNKNOWN;
+
+ rinfo->connectors[1].conn_type = conn_vga;
+ rinfo->connectors[1].ddc_type = ddc_vga;
+ rinfo->connectors[1].dac_type = dac_primary;
+ rinfo->connectors[1].tmds_type = tmds_unknown;
+ rinfo->connectors[1].mon_type = MT_UNKNOWN;
+
+ if (rinfo->has_CRTC2) {
+ rinfo->connectors[1].conn_type = conn_vga;
+ rinfo->connectors[1].ddc_type = ddc_crt2;
+ rinfo->connectors[1].dac_type = dac_tvdac;
+ rinfo->connectors[1].tmds_type = tmds_unknown;
+ rinfo->connectors[1].mon_type = MT_UNKNOWN;
+ }
}
- RTRACE("Scanning BIOS table ...\n");
- for(i=0; i<32; i++) {
- tmp0 = BIOS_IN16(tmp+64+i*2);
- if (tmp0 == 0)
- break;
- RTRACE(" %d x %d\n", BIOS_IN16(tmp0), BIOS_IN16(tmp0+2));
- if ((BIOS_IN16(tmp0) == rinfo->panel_info.xres) &&
- (BIOS_IN16(tmp0+2) == rinfo->panel_info.yres)) {
- rinfo->panel_info.hblank = (BIOS_IN16(tmp0+17) - BIOS_IN16(tmp0+19)) * 8;
- rinfo->panel_info.hOver_plus = ((BIOS_IN16(tmp0+21) -
- BIOS_IN16(tmp0+19) -1) * 8) & 0x7fff;
- rinfo->panel_info.hSync_width = BIOS_IN8(tmp0+23) * 8;
- rinfo->panel_info.vblank = BIOS_IN16(tmp0+24) - BIOS_IN16(tmp0+26);
- rinfo->panel_info.vOver_plus = (BIOS_IN16(tmp0+28) & 0x7ff) - BIOS_IN16(tmp0+26);
- rinfo->panel_info.vSync_width = (BIOS_IN16(tmp0+28) & 0xf800) >> 11;
- rinfo->panel_info.clock = BIOS_IN16(tmp0+9);
- /* Assume high active syncs for now until ATI tells me more... maybe we
- * can probe register values here ?
- */
- rinfo->panel_info.hAct_high = 1;
- rinfo->panel_info.vAct_high = 1;
- /* Mark panel infos valid */
- rinfo->panel_info.valid = 1;

- RTRACE("Found panel in BIOS table:\n");
- RTRACE(" hblank: %d\n", rinfo->panel_info.hblank);
- RTRACE(" hOver_plus: %d\n", rinfo->panel_info.hOver_plus);
- RTRACE(" hSync_width: %d\n", rinfo->panel_info.hSync_width);
- RTRACE(" vblank: %d\n", rinfo->panel_info.vblank);
- RTRACE(" vOver_plus: %d\n", rinfo->panel_info.vOver_plus);
- RTRACE(" vSync_width: %d\n", rinfo->panel_info.vSync_width);
- RTRACE(" clock: %d\n", rinfo->panel_info.clock);
-
- return 1;
+found:
+ /* Now, we do additional fixups */
+
+ /* RS300 has only one DAC, force TV-DAC on VGA port */
+ if (rinfo->family == CHIP_FAMILY_RS300) {
+ for (i = 0; i < RADEON_MAX_CONNECTORS; i++) {
+ if (rinfo->connectors[i].conn_type == conn_vga)
+ rinfo->connectors[i].dac_type = dac_tvdac;
+ else if (rinfo->connectors[i].dac_type != dac_unknown)
+ rinfo->connectors[i].dac_type = dac_primary;
}
}
- RTRACE("Didn't find panel in BIOS table !\n");
+
+ /* Single head chips all use primary DAC */
+ if (!rinfo->has_CRTC2)
+ rinfo->connectors[0].dac_type = dac_primary;
+
+ return;
+}
+
+#if defined CONFIG_PPC_OF || defined(CONFIG_SPARC)
+int __devinit radeon_get_conn_info_openfirmware(struct radeonfb_info *rinfo)
+{
+ int i;
+ int found = 0;
+
+ /* Only two heads for OF! */
+ for(i = 0 ; i < 2 ; i++) {
+ if (!radeon_probe_OF_head(rinfo, i))
+ found = 0;
+ }
+ return found;
+}
+#endif /* CONFIG_PPC_OF || CONFIG_SPARC */
+
+int __devinit radeon_get_conn_info_atom(struct radeonfb_info *rinfo)
+{
+ int i, j, offset, valids;
+ int ids[RADEON_MAX_CONNECTORS];
+ u16 portinfo, tmp0;
+ int conn_index = 0;
+ int conn_add = 2;
+ int idx = 0;
+ int ddc_type, dac_type, conn_type, tmds_type, port_id;
+ int connector_found = 0;
+ int shared;
+
+ offset = BIOS_IN16(rinfo->atom_data_start + 22);
+ if (offset == 0)
+ return -ENODEV;
+
+ /* Again, I slightly modified X.org algorithm. I assign "primary" outputs
+ * to entries 0 and 1, and anything else goes after 2.
+ *
+ * Also, I keep an array of all port IDs matching connectors[] array,
+ * unlike X which limits itself to "crtc"'s
+ */
+ for (i = 0; i < RADEON_MAX_CONNECTORS; i++)
+ ids[i] = -1;
+
+ valids = BIOS_IN16(offset + 4);
+ for (i = 0; i < 8; i++) {
+ shared = 0;
+ if (!(valids & (1 << i)))
+ continue;
+ portinfo = BIOS_IN16(offset + 6 + i*2);
+
+ conn_type = (portinfo >> 4) & 0xf;
+ dac_type = (portinfo & 0xf) - 1;
+ port_id = (portinfo >> 8) & 0xf;
+ ddc_type = ddc_none;
+
+ if ((tmp0 = BIOS_IN16(rinfo->atom_data_start + 24))) {
+ switch(BIOS_IN16(tmp0 + 4 + (27 * port_id)) * 4) {
+ case GPIO_MONID:
+ ddc_type = ddc_monid;
+ break;
+ case GPIO_DVI_DDC:
+ ddc_type = ddc_dvi;
+ break;
+ case GPIO_VGA_DDC:
+ ddc_type = ddc_vga;
+ break;
+ case GPIO_CRT2_DDC:
+ ddc_type = ddc_crt2;
+ break;
+ default:
+ ddc_type = ddc_none;
+ break;
+ }
+ }
+
+ if (i == 3)
+ tmds_type = tmds_internal;
+ else if (i == 7)
+ tmds_type = tmds_external;
+ else
+ tmds_type = tmds_unknown;
+
+ RTRACE("index %d port %d conn %d dac %d ddc %d tmds %d\n", i, port_id, conn_type, dac_type, ddc_type, tmds_type);
+
+ /* Ok, now we have the port ID, look for an existing port
+ * already using this ID
+ */
+ for (j = 0; j < RADEON_MAX_CONNECTORS; j++) {
+ if (port_id != ids[j])
+ continue;
+
+ /* This port is shared. Update the values (if needed)
+ * and probe next connector without creating a new
+ * connector entry.
+ */
+ if (tmds_type != tmds_unknown)
+ rinfo->connectors[j].tmds_type = tmds_type;
+ if (rinfo->connectors[j].dac_type == dac_unknown)
+ rinfo->connectors[j].dac_type = dac_type;
+ if (rinfo->connectors[j].ddc_type == ddc_none)
+ rinfo->connectors[j].ddc_type = ddc_type;
+
+ shared = 1;
+ }
+ if (shared)
+ continue;
+
+ conn_index = (ddc_type == ddc_dvi || conn_index == 1) ? 0 : 1;
+
+ /* if the port is a TV port, or both connectors are already
+ * assigned, assign it after further in the table
+ */
+ if (conn_type == conn_ctv || conn_type == conn_stv ||
+ (rinfo->connectors[0].conn_type != conn_none &&
+ rinfo->connectors[1].conn_type != conn_none))
+ idx = conn_add++;
+ else
+ idx = conn_index;
+
+ rinfo->connectors[idx].tmds_type = tmds_type;
+ rinfo->connectors[idx].dac_type = dac_type;
+ rinfo->connectors[idx].ddc_type = ddc_type;
+ rinfo->connectors[idx].conn_type = conn_type;
+ ids[idx] = port_id;
+
+ /* increment connector_found for primary connectors only */
+ if (idx < 2)
+ connector_found += (idx + 1);
+ }
+
+ if (connector_found == 0)
+ return -ENODEV;

return 0;
}
@@ -248,44 +733,167 @@ static int __devinit radeon_get_panel_info_BIOS(struct radeonfb_info *rinfo)
* doesn't quite work yet, but it's output is still useful for
* debugging
*/
-static void __devinit radeon_parse_connector_info(struct radeonfb_info *rinfo)
+int __devinit radeon_get_conn_info_legacy(struct radeonfb_info *rinfo)
{
- int offset, chips, connectors, tmp, i, conn, type;
-
- static char* __conn_type_table[16] = {
- "NONE", "Proprietary", "CRT", "DVI-I", "DVI-D", "Unknown", "Unknown",
- "Unknown", "Unknown", "Unknown", "Unknown", "Unknown", "Unknown",
- "Unknown", "Unknown", "Unknown"
+ int offset, i, entry, tmp;
+ int ddc_type, dac_type, conn_type, tmds_type;
+ int conn_index = 0;
+ int conn_add = 2;
+ int idx = 0;
+
+ /* Convert legacy to real connector types */
+ const enum radeon_conn_type legacy_conn_to_type[] = {
+ conn_none,
+ conn_proprietary,
+ conn_vga,
+ conn_dvi_i,
+ conn_dvi_d,
+ conn_ctv,
+ conn_stv,
+ conn_unsupported,
};

- if (!rinfo->bios_seg)
- return;
+ /* Some laptops only have one connector (VGA) listed in the connector
+ * table, we need to add LVDS in as a non-DDC display.
+ * Note, we can't assume the listed VGA will be filled in PortInfo[0],
+ * when walking through connector table. connector_found has following
+ * meaning:
+ * 0 -- nothing found,
+ * 1 -- only connectors[0] filled,
+ * 2 -- only connectors[1] filled,
+ * 3 -- both are filled.
+ *
+ * Note: I modified X.org algorithm to add additional entries if any
+ * after the second table slot. Those entries do not affect the value
+ * of connector_found. --BenH.
+ */
+ int connector_found = 0;

offset = BIOS_IN16(rinfo->fp_bios_start + 0x50);
- if (offset == 0) {
- printk(KERN_WARNING "radeonfb: No connector info table detected\n");
- return;
+ if (offset == 0)
+ return -ENODEV;
+
+ for (i = 1; i < 4; i++) {
+ entry = offset + i*2;
+
+ /* End of table */
+ if (!BIOS_IN8(entry) && i > 1)
+ break;
+
+ /* Read table entry, check connector type */
+ tmp = BIOS_IN16(entry);
+ conn_type = (tmp >> 12) & 0xf;
+ if (conn_type == legacy_conn_none)
+ continue;
+ ddc_type = (tmp >> 8) & 0xf;
+ dac_type = (tmp & 0x01) ? dac_tvdac : dac_primary;
+ tmds_type = (tmp & 0x10) ? tmds_external : tmds_internal;
+
+ /* same connector */
+ if (connector_found > 0) {
+ if (rinfo->connectors[conn_index].ddc_type == ddc_type)
+ continue;
+ }
+
+ /* sanity checks */
+ if (ddc_type > ddc_crt2)
+ ddc_type = ddc_none;
+ if (conn_type > legacy_conn_unsupported)
+ conn_type = legacy_conn_unsupported;
+ if (conn_type != legacy_conn_dvi_d &&
+ conn_type != legacy_conn_dvi_i &&
+ tmds_type == tmds_internal)
+ tmds_type= tmds_unknown;
+
+ /* convert connector type */
+ conn_type = legacy_conn_to_type[conn_type];
+
+ /* internal DDC_DVI port will get assigned to connector[0], or
+ * if there is no DDC_DVI (like in some IGPs).
+ */
+ conn_index = (ddc_type == ddc_dvi || conn_index == 1) ? 0 : 1;
+
+ /* if the port is a TV port, or both connectors are already
+ * assigned, assign it after further in the table
+ */
+ if (conn_type == conn_ctv || conn_type == conn_stv ||
+ (rinfo->connectors[0].conn_type != conn_none &&
+ rinfo->connectors[1].conn_type))
+ idx = conn_add++;
+ else
+ idx = conn_index;
+
+ /* if table full, exit */
+ if (idx >= RADEON_MAX_CONNECTORS) {
+ printk(KERN_WARNING "radeonfb: Connector table full !\n");
+ break;
+ }
+ rinfo->connectors[idx].conn_type = conn_type;
+ rinfo->connectors[idx].ddc_type = ddc_type;
+ rinfo->connectors[idx].dac_type = dac_type;
+ rinfo->connectors[idx].tmds_type = tmds_type;
+
+ /* increment connector_found for primary connectors only */
+ if (idx < 2)
+ connector_found += (idx + 1);
}

- /* Don't do much more at this point but displaying the data if
- * DEBUG is enabled
- */
- chips = BIOS_IN8(offset++) >> 4;
- RTRACE("%d chips in connector info\n", chips);
- for (i = 0; i < chips; i++) {
- tmp = BIOS_IN8(offset++);
- connectors = tmp & 0x0f;
- RTRACE(" - chip %d has %d connectors\n", tmp >> 4, connectors);
- for (conn = 0; ; conn++) {
- tmp = BIOS_IN16(offset);
- if (tmp == 0)
- break;
- offset += 2;
- type = (tmp >> 12) & 0x0f;
- RTRACE(" * connector %d of type %d (%s) : %04x\n",
- conn, type, __conn_type_table[type], tmp);
+ if (rinfo->is_mobility) {
+ /* For the cases where only one VGA connector is found,
+ * we assume LVDS is not listed in the connector table,
+ * add it in here as the first port.
+ *
+ * TODO: Check what's up with laptops that have a DVI output
+ * and no LVDS entry in the table. I suspect some thinkpads
+ * may play trick with us here... We may want to check the
+ * presence of a panel via LVDS_GEN_CNTL to be sure...
+ */
+ if ((connector_found < 3) &&
+ (rinfo->connectors[idx].conn_type == conn_vga)) {
+ if (connector_found == 1) {
+ memcpy(&rinfo->connectors[1], &rinfo->connectors[0],
+ sizeof(struct radeon_connector));
+ }
+
+ /* Fixme: TV DAC is probably elsewhere ... */
+ rinfo->connectors[0].dac_type = dac_tvdac;
+ rinfo->connectors[0].tmds_type = tmds_unknown;
+ rinfo->connectors[0].ddc_type = ddc_none;
+ rinfo->connectors[0].conn_type = conn_proprietary;
+
+ printk(KERN_WARNING "radeonfb: LVDS port is not in connector table, added in.\n");
+ if (connector_found == 0)
+ connector_found = 1;
+ else
+ connector_found = 3;
}
+
+ /* Check for LCD DDC info table */
+ if ((offset = BIOS_IN16(rinfo->fp_bios_start + 0x42))) {
+ if ((tmp = BIOS_IN16(offset + 0x15))) {
+ if ((ddc_type = BIOS_IN8(tmp+2) & 0x07)) {
+ rinfo->connectors[0].ddc_type = ddc_type;
+ printk(KERN_WARNING "radeonfb: LCD DDC Info Table found, "
+ "forcing primary port to %d\n",
+ ddc_type);
+ }
+ }
+ }
+ } else if (connector_found == 2) {
+ memcpy(&rinfo->connectors[0], &rinfo->connectors[1],
+ sizeof (struct radeon_connector));
+ rinfo->connectors[1].dac_type = dac_unknown;
+ rinfo->connectors[1].tmds_type = tmds_unknown;
+ rinfo->connectors[1].ddc_type = ddc_none;
+ rinfo->connectors[1].conn_type = conn_none;
+ connector_found = 1;
}
+
+ if (connector_found == 0)
+ return -ENODEV;
+
+ /* External TMDS Table, not used now */
+ return 0;
}


@@ -362,6 +970,51 @@ static int __devinit radeon_crt_is_connected(struct radeonfb_info *rinfo, int is
return connected ? MT_CRT : MT_NONE;
}

+/* Find if the desired connector and monitor are compatible */
+static int __devinit radeon_conn_monitor_compatible(int mon_type, int conn_type)
+{
+ switch(mon_type) {
+ case MT_CRT:
+ return ((conn_type == conn_vga) || (conn_type == conn_dvi_a));
+ case MT_DFP:
+ return ((conn_type == conn_dvi_i) || (conn_type == conn_dvi_d));
+ case MT_LCD:
+ return (conn_type == conn_lvds);
+ case MT_CTV:
+ return (conn_type == conn_ctv);
+ case MT_STV:
+ return (conn_type == conn_stv);
+ case MT_UNKNOWN:
+ case MT_NONE:
+ default:
+ return 0;
+ }
+ // leaves conn_digital, conn_unsupported, conn_propritetary
+}
+
+/* Find a suitable connector for this display type */
+static int __devinit radeon_find_connector_for_mon(struct radeonfb_info *rinfo, int mon_type)
+{
+ int i;
+
+ if (mon_type <= MT_NONE)
+ return 0;
+
+ for (i = 0; i < RADEON_MAX_CONNECTORS ; i++) {
+ if (radeon_conn_monitor_compatible(mon_type, rinfo->connectors[i].conn_type) &&
+ (rinfo->connectors[i].mon_type <= MT_NONE)) {
+ rinfo->connectors[i].mon_type = mon_type;
+ rinfo->connectors[i].head = rinfo->num_heads;
+ rinfo->heads[rinfo->num_heads] = i;
+ rinfo->num_heads++;
+ return 0;
+ }
+ }
+
+ printk(KERN_INFO "radeonfb: couldn't find a connector for monitor %d\n", mon_type);
+ return -1;
+}
+
/*
* Parse the "monitor_layout" string if any. This code is mostly
* copied from XFree's radeon driver
@@ -407,19 +1060,20 @@ static int __devinit radeon_parse_monitor_layout(struct radeonfb_info *rinfo,
s1[i] = 0;
s2[0] = 0;
}
+
if (strcmp(s1, "CRT") == 0)
- rinfo->mon1_type = MT_CRT;
+ radeon_find_connector_for_mon(rinfo, MT_CRT);
else if (strcmp(s1, "TMDS") == 0)
- rinfo->mon1_type = MT_DFP;
+ radeon_find_connector_for_mon(rinfo, MT_DFP);
else if (strcmp(s1, "LVDS") == 0)
- rinfo->mon1_type = MT_LCD;
+ radeon_find_connector_for_mon(rinfo, MT_LCD);

if (strcmp(s2, "CRT") == 0)
- rinfo->mon2_type = MT_CRT;
+ radeon_find_connector_for_mon(rinfo, MT_CRT);
else if (strcmp(s2, "TMDS") == 0)
- rinfo->mon2_type = MT_DFP;
+ radeon_find_connector_for_mon(rinfo, MT_DFP);
else if (strcmp(s2, "LVDS") == 0)
- rinfo->mon2_type = MT_LCD;
+ radeon_find_connector_for_mon(rinfo, MT_LCD);

return 1;
}
@@ -433,12 +1087,7 @@ static int __devinit radeon_parse_monitor_layout(struct radeonfb_info *rinfo,
void __devinit radeon_probe_screens(struct radeonfb_info *rinfo,
const char *monitor_layout, int ignore_edid)
{
-#ifdef CONFIG_FB_RADEON_I2C
- int ddc_crt2_used = 0;
-#endif
- int tmp, i;
-
- radeon_parse_connector_info(rinfo);
+ int i;

if (radeon_parse_monitor_layout(rinfo, monitor_layout)) {

@@ -449,214 +1098,142 @@ void __devinit radeon_probe_screens(struct radeonfb_info *rinfo,
* a layout for each card ?
*/

- RTRACE("Using specified monitor layout: %s", monitor_layout);
+ RTRACE("Using specified monitor layout: %s\n", monitor_layout);
#ifdef CONFIG_FB_RADEON_I2C
if (!ignore_edid) {
- if (rinfo->mon1_type != MT_NONE)
- if (!radeon_probe_i2c_connector(rinfo, ddc_dvi, &rinfo->mon1_EDID)) {
- radeon_probe_i2c_connector(rinfo, ddc_crt2, &rinfo->mon1_EDID);
- ddc_crt2_used = 1;
+ int mon_type;
+
+ /* If the DDC detection fails,
+ we still want to use the user's specified layout! */
+ mon_type = PRIMARY_MONITOR(rinfo);
+
+ if (PRIMARY_MONITOR(rinfo) > MT_NONE)
+ if (radeon_probe_i2c_connector(rinfo, &PRIMARY_HEAD(rinfo)))
+ PRIMARY_MONITOR(rinfo) = mon_type;
+ if (SECONDARY_HEAD_PRESENT(rinfo)) {
+ mon_type = SECONDARY_MONITOR(rinfo);
+ if (SECONDARY_MONITOR(rinfo) > MT_NONE) {
+ if (radeon_probe_i2c_connector(rinfo, &SECONDARY_HEAD(rinfo)))
+ rinfo->connectors[rinfo->heads[1]].mon_type = mon_type;
}
- if (rinfo->mon2_type != MT_NONE)
- if (!radeon_probe_i2c_connector(rinfo, ddc_vga, &rinfo->mon2_EDID) &&
- !ddc_crt2_used)
- radeon_probe_i2c_connector(rinfo, ddc_crt2, &rinfo->mon2_EDID);
+ }
}
#endif /* CONFIG_FB_RADEON_I2C */
- if (rinfo->mon1_type == MT_NONE) {
- if (rinfo->mon2_type != MT_NONE) {
- rinfo->mon1_type = rinfo->mon2_type;
- rinfo->mon1_EDID = rinfo->mon2_EDID;
- } else {
- rinfo->mon1_type = MT_CRT;
- printk(KERN_INFO "radeonfb: No valid monitor, assuming CRT on first port\n");
- }
- rinfo->mon2_type = MT_NONE;
- rinfo->mon2_EDID = NULL;
+
+ /* If the user specified a bogus monitor layout... */
+ if (PRIMARY_MONITOR(rinfo) <= MT_NONE) {
+ radeon_find_connector_for_mon(rinfo, MT_CRT);
+ printk(KERN_INFO "radeonfb: No valid monitor, assuming CRT on first port\n");
}
} else {
/*
* Auto-detecting display type (well... trying to ...)
*/
-
- RTRACE("Starting monitor auto detection...\n");

-#if DEBUG && defined(CONFIG_FB_RADEON_I2C)
- {
- u8 *EDIDs[4] = { NULL, NULL, NULL, NULL };
- int mon_types[4] = {MT_NONE, MT_NONE, MT_NONE, MT_NONE};
- int i;
+ RTRACE("Starting monitor auto detection...\n");

- for (i = 0; i < 4; i++)
- mon_types[i] = radeon_probe_i2c_connector(rinfo,
- i+1, &EDIDs[i]);
- }
-#endif /* DEBUG */
/*
* Old single head cards
*/
if (!rinfo->has_CRTC2) {
-#if defined(CONFIG_PPC_OF) || defined(CONFIG_SPARC)
- if (rinfo->mon1_type == MT_NONE)
- rinfo->mon1_type = radeon_probe_OF_head(rinfo, 0,
- &rinfo->mon1_EDID);
-#endif /* CONFIG_PPC_OF || CONFIG_SPARC */
#ifdef CONFIG_FB_RADEON_I2C
- if (rinfo->mon1_type == MT_NONE)
- rinfo->mon1_type =
- radeon_probe_i2c_connector(rinfo, ddc_dvi,
- &rinfo->mon1_EDID);
- if (rinfo->mon1_type == MT_NONE)
- rinfo->mon1_type =
- radeon_probe_i2c_connector(rinfo, ddc_vga,
- &rinfo->mon1_EDID);
- if (rinfo->mon1_type == MT_NONE)
- rinfo->mon1_type =
- radeon_probe_i2c_connector(rinfo, ddc_crt2,
- &rinfo->mon1_EDID);
-#endif /* CONFIG_FB_RADEON_I2C */
- if (rinfo->mon1_type == MT_NONE)
- rinfo->mon1_type = MT_CRT;
- goto bail;
- }
-
- /*
- * Check for cards with reversed DACs or TMDS controllers using BIOS
- */
- if (rinfo->bios_seg &&
- (tmp = BIOS_IN16(rinfo->fp_bios_start + 0x50))) {
- for (i = 1; i < 4; i++) {
- unsigned int tmp0;
-
- if (!BIOS_IN8(tmp + i*2) && i > 1)
+ /* Probe each connector */
+ for(i = 0 ; i < RADEON_MAX_CONNECTORS ; i++) {
+ if (PRIMARY_MONITOR(rinfo) > MT_NONE)
+ /* only one head */
break;
- tmp0 = BIOS_IN16(tmp + i*2);
- if ((!(tmp0 & 0x01)) && (((tmp0 >> 8) & 0x0f) == ddc_dvi)) {
- rinfo->reversed_DAC = 1;
- printk(KERN_INFO "radeonfb: Reversed DACs detected\n");
- }
- if ((((tmp0 >> 8) & 0x0f) == ddc_dvi) && ((tmp0 >> 4) & 0x01)) {
- rinfo->reversed_TMDS = 1;
- printk(KERN_INFO "radeonfb: Reversed TMDS detected\n");
+ if (!radeon_probe_i2c_connector(rinfo, &rinfo->connectors[i])) {
+ rinfo->heads[rinfo->num_heads] = i;
+ rinfo->connectors[i].head = rinfo->num_heads++;
}
}
+#endif /* CONFIG_FB_RADEON_I2C */
+ if (PRIMARY_MONITOR(rinfo) <= MT_NONE) {
+ radeon_find_connector_for_mon(rinfo, MT_CRT);
+ }
+ goto bail;
}

- /*
- * Probe primary head (DVI or laptop internal panel)
- */
-#if defined(CONFIG_PPC_OF) || defined(CONFIG_SPARC)
- if (rinfo->mon1_type == MT_NONE)
- rinfo->mon1_type = radeon_probe_OF_head(rinfo, 0,
- &rinfo->mon1_EDID);
-#endif /* CONFIG_PPC_OF || CONFIG_SPARC */
+ /* Probe heads */
#ifdef CONFIG_FB_RADEON_I2C
- if (rinfo->mon1_type == MT_NONE)
- rinfo->mon1_type = radeon_probe_i2c_connector(rinfo, ddc_dvi,
- &rinfo->mon1_EDID);
- if (rinfo->mon1_type == MT_NONE) {
- rinfo->mon1_type = radeon_probe_i2c_connector(rinfo, ddc_crt2,
- &rinfo->mon1_EDID);
- if (rinfo->mon1_type != MT_NONE)
- ddc_crt2_used = 1;
- }
-#endif /* CONFIG_FB_RADEON_I2C */
- if (rinfo->mon1_type == MT_NONE && rinfo->is_mobility &&
- ((rinfo->bios_seg && (INREG(BIOS_4_SCRATCH) & 4))
- || (INREG(LVDS_GEN_CNTL) & LVDS_ON))) {
- rinfo->mon1_type = MT_LCD;
- printk("Non-DDC laptop panel detected\n");
+ /* Probe each connector in turn. */
+ for(i = 0; i < RADEON_MAX_CONNECTORS; i++) {
+ if (rinfo->connectors[i].mon_type > MT_NONE)
+ /* Don't probe "detected" stuff again */
+ continue;
+ if (!radeon_probe_i2c_connector(rinfo, &rinfo->connectors[i])) {
+ rinfo->heads[rinfo->num_heads] = i;
+ rinfo->connectors[i].head = rinfo->num_heads++;
+ }
}
- if (rinfo->mon1_type == MT_NONE)
- rinfo->mon1_type = radeon_crt_is_connected(rinfo, rinfo->reversed_DAC);

- /*
- * Probe secondary head (mostly VGA, can be DVI)
- */
-#if defined(CONFIG_PPC_OF) || defined(CONFIG_SPARC)
- if (rinfo->mon2_type == MT_NONE)
- rinfo->mon2_type = radeon_probe_OF_head(rinfo, 1,
- &rinfo->mon2_EDID);
-#endif /* CONFIG_PPC_OF || defined(CONFIG_SPARC) */
-#ifdef CONFIG_FB_RADEON_I2C
- if (rinfo->mon2_type == MT_NONE)
- rinfo->mon2_type = radeon_probe_i2c_connector(rinfo, ddc_vga,
- &rinfo->mon2_EDID);
- if (rinfo->mon2_type == MT_NONE && !ddc_crt2_used)
- rinfo->mon2_type = radeon_probe_i2c_connector(rinfo, ddc_crt2,
- &rinfo->mon2_EDID);
#endif /* CONFIG_FB_RADEON_I2C */
- if (rinfo->mon2_type == MT_NONE)
- rinfo->mon2_type = radeon_crt_is_connected(rinfo, !rinfo->reversed_DAC);

- /*
- * If we only detected port 2, we swap them, if none detected,
- * assume CRT (maybe fallback to old BIOS_SCRATCH stuff ? or look
- * at FP registers ?)
- */
- if (rinfo->mon1_type == MT_NONE) {
- if (rinfo->mon2_type != MT_NONE) {
- rinfo->mon1_type = rinfo->mon2_type;
- rinfo->mon1_EDID = rinfo->mon2_EDID;
- } else
- rinfo->mon1_type = MT_CRT;
- rinfo->mon2_type = MT_NONE;
- rinfo->mon2_EDID = NULL;
+ /* Mobility chips usually have LCDs... */
+ if ((PRIMARY_MONITOR(rinfo) <= MT_NONE) &&
+ rinfo->is_mobility &&
+ ((rinfo->bios_seg && (INREG(BIOS_4_SCRATCH) & 4)) ||
+ (INREG(LVDS_GEN_CNTL) & (LVDS_EN|LVDS_ON)))) {
+ printk(KERN_INFO "radeonfb: Non-DDC laptop panel detected\n");
+ radeon_find_connector_for_mon(rinfo, MT_LCD);
+ if (rinfo->radeon_get_lvds_info) {
+ rinfo->radeon_get_lvds_info(rinfo);
+ }
}

- /*
- * Deal with reversed TMDS
- */
- if (rinfo->reversed_TMDS) {
- /* Always keep internal TMDS as primary head */
- if (rinfo->mon1_type == MT_DFP || rinfo->mon2_type == MT_DFP) {
- int tmp_type = rinfo->mon1_type;
- u8 *tmp_EDID = rinfo->mon1_EDID;
- rinfo->mon1_type = rinfo->mon2_type;
- rinfo->mon1_EDID = rinfo->mon2_EDID;
- rinfo->mon2_type = tmp_type;
- rinfo->mon2_EDID = tmp_EDID;
- if (rinfo->mon1_type == MT_CRT || rinfo->mon2_type == MT_CRT)
- rinfo->reversed_DAC ^= 1;
- }
+ /* Probe for monitors on the primary and secondary crtc heads */
+ if (PRIMARY_MONITOR(rinfo) <= MT_NONE)
+ radeon_find_connector_for_mon(rinfo, radeon_crt_is_connected(rinfo, 1));
+
+ /* If we still haven't found anything, just force it to be on the CRT.. */
+ if (PRIMARY_MONITOR(rinfo) <= MT_NONE)
+ radeon_find_connector_for_mon(rinfo, MT_CRT);
+
+ /* Always keep internal TMDS as primary head */
+ if (SECONDARY_HEAD_PRESENT(rinfo) &&
+ (SECONDARY_HEAD(rinfo).tmds_type == tmds_internal) &&
+ (SECONDARY_MONITOR(rinfo) == MT_DFP)) {
+ int head = rinfo->heads[0];
+ rinfo->heads[0] = rinfo->heads[1];
+ rinfo->heads[1] = head;
}
}
- if (ignore_edid) {
- kfree(rinfo->mon1_EDID);
- rinfo->mon1_EDID = NULL;
- kfree(rinfo->mon2_EDID);
- rinfo->mon2_EDID = NULL;
+bail:
+
+ /* Dump out the heads we've found so far */
+ for (i = 0; i < RADEON_MAX_CONNECTORS; i++) {
+ if (rinfo->connectors[i].conn_type == conn_none)
+ continue;
+ printk(KERN_INFO " * Connector %d is %s. Head %d, Monitor: %s ", i + 1,
+ conn_type_name[rinfo->connectors[i].conn_type],
+ rinfo->connectors[i].head,
+ rinfo->connectors[i].mon_type == MT_UNKNOWN ?
+ "Not Probed Yet" :
+ mon_type_name[rinfo->connectors[i].mon_type]);
+
+ if (rinfo->connectors[i].edid)
+ printk("(EDID probed)\n");
+ else
+ printk("\n");
+
+ printk(KERN_INFO " ddc port: %d, dac: %d, tmds: %d\n",
+ rinfo->connectors[i].ddc_type,
+ rinfo->connectors[i].dac_type,
+ rinfo->connectors[i].tmds_type);
}
-
- bail:
- printk(KERN_INFO "radeonfb: Monitor 1 type %s found\n",
- radeon_get_mon_name(rinfo->mon1_type));
- if (rinfo->mon1_EDID)
- printk(KERN_INFO "radeonfb: EDID probed\n");
- if (!rinfo->has_CRTC2)
- return;
- printk(KERN_INFO "radeonfb: Monitor 2 type %s found\n",
- radeon_get_mon_name(rinfo->mon2_type));
- if (rinfo->mon2_EDID)
- printk(KERN_INFO "radeonfb: EDID probed\n");
}


-/*
- * This functions applyes any arch/model/machine specific fixups
- * to the panel info. It may eventually alter EDID block as
- * well or whatever is specific to a given model and not probed
- * properly by the default code
- */
-static void radeon_fixup_panel_info(struct radeonfb_info *rinfo)
-{
#ifdef CONFIG_PPC_OF
+int __devinit radeon_get_lvds_info_openfirmware(struct radeonfb_info *rinfo)
+{
+
/*
* LCD Flat panels should use fixed dividers, we enfore that on
* PPC only for now...
*/
- if (!rinfo->panel_info.use_bios_dividers && rinfo->mon1_type == MT_LCD
- && rinfo->is_mobility) {
+ if (!rinfo->panel_info.use_bios_dividers && (PRIMARY_MONITOR(rinfo) == MT_LCD) &&
+ rinfo->is_mobility) {
int ppll_div_sel;
u32 ppll_divn;
ppll_div_sel = INREG8(CLOCK_CNTL_INDEX + 1) & 0x3;
@@ -667,15 +1244,16 @@ static void radeon_fixup_panel_info(struct radeonfb_info *rinfo)
rinfo->panel_info.post_divider = (ppll_divn >> 16) & 0x7;
rinfo->panel_info.use_bios_dividers = 1;

- printk(KERN_DEBUG "radeonfb: Using Firmware dividers 0x%08x "
+ printk(KERN_INFO "Using Firmware dividers 0x%08x "
"from PPLL %d\n",
rinfo->panel_info.fbk_divider |
(rinfo->panel_info.post_divider << 16),
ppll_div_sel);
+ return 0;
}
-#endif /* CONFIG_PPC_OF */
+ return -ENODEV;
}
-
+#endif /* CONFIG_PPC_OF */

/*
* Fill up panel infos from a mode definition, either returned by the EDID
@@ -688,18 +1266,18 @@ static void radeon_var_to_panel_info(struct radeonfb_info *rinfo, struct fb_var_
rinfo->panel_info.clock = 100000000 / var->pixclock;
rinfo->panel_info.hOver_plus = var->right_margin;
rinfo->panel_info.hSync_width = var->hsync_len;
- rinfo->panel_info.hblank = var->left_margin +
+ rinfo->panel_info.hblank = var->left_margin +
(var->right_margin + var->hsync_len);
rinfo->panel_info.vOver_plus = var->lower_margin;
rinfo->panel_info.vSync_width = var->vsync_len;
- rinfo->panel_info.vblank = var->upper_margin +
+ rinfo->panel_info.vblank = var->upper_margin +
(var->lower_margin + var->vsync_len);
rinfo->panel_info.hAct_high =
(var->sync & FB_SYNC_HOR_HIGH_ACT) != 0;
rinfo->panel_info.vAct_high =
(var->sync & FB_SYNC_VERT_HIGH_ACT) != 0;
rinfo->panel_info.valid = 1;
- /* We use a default of 200ms for the panel power delay,
+ /* We use a default of 200ms for the panel power delay,
* I need to have a real schedule() instead of mdelay's in the panel code.
* we might be possible to figure out a better power delay either from
* MacOS OF tree or from the EDID block (proprietary extensions ?)
@@ -742,22 +1320,34 @@ void __devinit radeon_check_modes(struct radeonfb_info *rinfo, const char *mode_
info->var = radeonfb_default_var;
INIT_LIST_HEAD(&info->modelist);

- /*
- * First check out what BIOS has to say
- */
- if (rinfo->mon1_type == MT_LCD)
- radeon_get_panel_info_BIOS(rinfo);
+ /* If we're an LCD and don't have a valid setup... */
+ if ((PRIMARY_MONITOR(rinfo) == MT_LCD) &&
+ !rinfo->panel_info.valid &&
+ rinfo->radeon_get_lvds_info) {
+ rinfo->radeon_get_lvds_info(rinfo);
+ }
+
+#if 0
+ /* If we're a mobility and still haven't detected a screen..? */
+ if ((PRIMARY_MONITOR(rinfo) <= MT_NONE) &&
+ rinfo->is_mobility &&
+ rinfo->radeon_get_lvds_info) {
+ if (!rinfo->radeon_get_lvds_info(rinfo))
+ radeon_find_connector_for_mon(rinfo, MT_LCD);
+ }
+#endif

/*
* Parse EDID detailed timings and deduce panel infos if any. Right now
* we only deal with first entry returned by parse_EDID, we may do better
* some day...
*/
- if (!rinfo->panel_info.use_bios_dividers && rinfo->mon1_type != MT_CRT
- && rinfo->mon1_EDID) {
+ if (!rinfo->panel_info.use_bios_dividers &&
+ (PRIMARY_MONITOR(rinfo) != MT_CRT) &&
+ PRIMARY_HEAD(rinfo).edid) {
struct fb_var_screeninfo var;
RTRACE("Parsing EDID data for panel info\n");
- if (fb_parse_edid(rinfo->mon1_EDID, &var) == 0) {
+ if (fb_parse_edid(PRIMARY_HEAD(rinfo).edid, &var) == 0) {
if (var.xres >= rinfo->panel_info.xres &&
var.yres >= rinfo->panel_info.yres)
radeon_var_to_panel_info(rinfo, &var);
@@ -765,15 +1355,10 @@ void __devinit radeon_check_modes(struct radeonfb_info *rinfo, const char *mode_
}

/*
- * Do any additional platform/arch fixups to the panel infos
- */
- radeon_fixup_panel_info(rinfo);
-
- /*
* If we have some valid panel infos, we setup the default mode based on
* those
*/
- if (rinfo->mon1_type != MT_CRT && rinfo->panel_info.valid) {
+ if ((PRIMARY_MONITOR(rinfo) != MT_CRT) && rinfo->panel_info.valid) {
struct fb_var_screeninfo *var = &info->var;

RTRACE("Setting up default mode based on panel info\n");
@@ -804,22 +1389,21 @@ void __devinit radeon_check_modes(struct radeonfb_info *rinfo, const char *mode_
/*
* Now build modedb from EDID
*/
- if (rinfo->mon1_EDID) {
- fb_edid_to_monspecs(rinfo->mon1_EDID, &info->monspecs);
+ if (PRIMARY_HEAD(rinfo).edid) {
+ fb_edid_to_monspecs(PRIMARY_HEAD(rinfo).edid, &info->monspecs);
fb_videomode_to_modelist(info->monspecs.modedb,
info->monspecs.modedb_len,
&info->modelist);
- rinfo->mon1_modedb = info->monspecs.modedb;
- rinfo->mon1_dbsize = info->monspecs.modedb_len;
+ PRIMARY_HEAD(rinfo).modedb = info->monspecs.modedb;
+ PRIMARY_HEAD(rinfo).modedb_size = info->monspecs.modedb_len;
}

-
/*
* Finally, if we don't have panel infos we need to figure some (or
* we try to read it from card), we try to pick a default mode
* and create some panel infos. Whatever...
*/
- if (rinfo->mon1_type != MT_CRT && !rinfo->panel_info.valid) {
+ if ((PRIMARY_MONITOR(rinfo) != MT_CRT) && !rinfo->panel_info.valid) {
struct fb_videomode *modedb;
int dbsize;
char modename[32];
@@ -833,25 +1417,26 @@ void __devinit radeon_check_modes(struct radeonfb_info *rinfo, const char *mode_
}
if (rinfo->panel_info.xres == 0 || rinfo->panel_info.yres == 0) {
printk(KERN_WARNING "radeonfb: Can't find panel size, going back to CRT\n");
- rinfo->mon1_type = MT_CRT;
+ radeon_find_connector_for_mon(rinfo, MT_CRT);
goto pickup_default;
}
printk(KERN_WARNING "radeonfb: Assuming panel size %dx%d\n",
rinfo->panel_info.xres, rinfo->panel_info.yres);
- modedb = rinfo->mon1_modedb;
- dbsize = rinfo->mon1_dbsize;
+ modedb = PRIMARY_HEAD(rinfo).modedb;
+ dbsize = PRIMARY_HEAD(rinfo).modedb_size;
snprintf(modename, 31, "%dx%d", rinfo->panel_info.xres, rinfo->panel_info.yres);
if (fb_find_mode(&info->var, info, modename,
modedb, dbsize, NULL, 8) == 0) {
printk(KERN_WARNING "radeonfb: Can't find mode for panel size, going back to CRT\n");
- rinfo->mon1_type = MT_CRT;
+ radeon_find_connector_for_mon(rinfo, MT_CRT);
goto pickup_default;
}
has_default_mode = 1;
+ radeon_find_connector_for_mon(rinfo, MT_LCD);
radeon_var_to_panel_info(rinfo, &info->var);
}

- pickup_default:
+pickup_default:
/*
* Apply passed-in mode option if any
*/
@@ -860,7 +1445,7 @@ void __devinit radeon_check_modes(struct radeonfb_info *rinfo, const char *mode_
info->monspecs.modedb,
info->monspecs.modedb_len, NULL, 8) != 0)
has_default_mode = 1;
- }
+ }

/*
* Still no mode, let's pick up a default from the db
@@ -947,14 +1532,14 @@ int radeon_match_mode(struct radeonfb_info *rinfo,
memcpy(dest, src, sizeof(struct fb_var_screeninfo));

/* Check if we have a modedb built from EDID */
- if (rinfo->mon1_modedb) {
- db = rinfo->mon1_modedb;
- dbsize = rinfo->mon1_dbsize;
+ if (PRIMARY_HEAD(rinfo).modedb) {
+ db = PRIMARY_HEAD(rinfo).modedb;
+ dbsize = PRIMARY_HEAD(rinfo).modedb_size;
native_db = 1;
}

/* Check if we have a scaler allowing any fancy mode */
- has_rmx = rinfo->mon1_type == MT_LCD || rinfo->mon1_type == MT_DFP;
+ has_rmx = (PRIMARY_MONITOR(rinfo) == MT_LCD) || (PRIMARY_MONITOR(rinfo) == MT_DFP);

/* If we have a scaler and are passed FB_ACTIVATE_TEST or
* FB_ACTIVATE_NOW, just do basic checking and return if the
@@ -967,7 +1552,7 @@ int radeon_match_mode(struct radeonfb_info *rinfo,
* 640x480-60, but I assume userland knows what it's doing here
* (though I may be proven wrong...)
*/
- if (has_rmx == 0 && rinfo->mon1_modedb)
+ if (has_rmx == 0 && PRIMARY_HEAD(rinfo).modedb)
if (fb_validate_mode((struct fb_var_screeninfo *)src, rinfo->info))
return -EINVAL;
return 0;
@@ -979,7 +1564,7 @@ int radeon_match_mode(struct radeonfb_info *rinfo,
int d;

if (db[i].yres < src->yres)
- continue;
+ continue;
if (db[i].xres < src->xres)
continue;
d = radeon_compare_modes(src, &db[i]);
diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h
index 7ebffcd..9d0b161 100644
--- a/drivers/video/aty/radeonfb.h
+++ b/drivers/video/aty/radeonfb.h
@@ -26,6 +26,8 @@
* Most of the definitions here are adapted right from XFree86 *
***************************************************************/

+/* Sorry, we have to limit video ram to 128M */
+#define MAX_VRAM (128*1024*1024)

/*
* Chip families. Must fit in the low 16 bits of a long word
@@ -47,7 +49,8 @@ enum radeon_family {
CHIP_FAMILY_R350,
CHIP_FAMILY_RV350,
CHIP_FAMILY_RV380, /* RV370/RV380/M22/M24 */
- CHIP_FAMILY_R420, /* R420/R423/M18 */
+ CHIP_FAMILY_RV410, /* RV410/M26 */
+ CHIP_FAMILY_R420, /* R420/R423/R480/M18 */
CHIP_FAMILY_RS480,
CHIP_FAMILY_LAST,
};
@@ -65,6 +68,7 @@ enum radeon_family {
((rinfo)->family == CHIP_FAMILY_RV350) || \
((rinfo)->family == CHIP_FAMILY_R350) || \
((rinfo)->family == CHIP_FAMILY_RV380) || \
+ ((rinfo)->family == CHIP_FAMILY_RV410) || \
((rinfo)->family == CHIP_FAMILY_R420) || \
((rinfo)->family == CHIP_FAMILY_RS480) )

@@ -88,11 +92,50 @@ enum radeon_errata {
CHIP_ERRATA_PLL_DELAY = 0x00000004,
};

+/*
+ * DDC i2c ports
+ */
+enum radeon_ddc_type {
+ ddc_none = -1,
+ ddc_monid = 0,
+ ddc_dvi,
+ ddc_vga,
+ ddc_crt2,
+};
+
+/*
+ * Connector types
+ */
+enum radeon_legacy_conn_type {
+ legacy_conn_none = 0,
+ legacy_conn_proprietary,
+ legacy_conn_crt,
+ legacy_conn_dvi_i,
+ legacy_conn_dvi_d,
+ legacy_conn_ctv,
+ legacy_conn_stv,
+ legacy_conn_unsupported,
+};
+
+enum radeon_conn_type {
+ conn_none = 0,
+ conn_vga,
+ conn_dvi_i,
+ conn_dvi_d,
+ conn_dvi_a,
+ conn_stv,
+ conn_ctv,
+ conn_lvds,
+ conn_digital,
+ conn_unsupported,
+ conn_proprietary,
+};

/*
* Monitor types
*/
-enum radeon_montype {
+enum radeon_mon_type {
+ MT_UNKNOWN = -1,
MT_NONE = 0,
MT_CRT, /* CRT */
MT_LCD, /* LCD */
@@ -102,27 +145,45 @@ enum radeon_montype {
};

/*
- * DDC i2c ports
+ * DAC types
*/
-enum ddc_type {
- ddc_none,
- ddc_monid,
- ddc_dvi,
- ddc_vga,
- ddc_crt2,
+enum radeon_dac_type {
+ dac_unknown = -1,
+ dac_primary = 0,
+ dac_tvdac = 1,
};

/*
- * Connector types
+ * TMDS types
*/
-enum conn_type {
- conn_none,
- conn_proprietary,
- conn_crt,
- conn_DVI_I,
- conn_DVI_D,
+enum radeon_tmds_type {
+ tmds_unknown = -1,
+ tmds_internal = 0,
+ tmds_external = 1,
};

+/*
+ * Each connector gets this structure associated with it,
+ * containing infos about the connector wiring and about
+ * whatever has been detected on it
+ */
+struct radeon_connector {
+ enum radeon_conn_type conn_type;
+ enum radeon_ddc_type ddc_type;
+ enum radeon_dac_type dac_type;
+ enum radeon_tmds_type tmds_type;
+ enum radeon_mon_type mon_type;
+ u8 *edid;
+ struct fb_videomode *modedb;
+ unsigned int modedb_size;
+
+ int head;
+};
+
+/*
+ * Currently, the driver deals with at most 4 connectors
+ */
+#define RADEON_MAX_CONNECTORS 4

/*
* PLL infos
@@ -130,11 +191,19 @@ enum conn_type {
struct pll_info {
int ppll_max;
int ppll_min;
- int sclk, mclk;
+ int sclk;
+ int mclk;
int ref_div;
int ref_clk;
};

+/*
+ * TMDS PLL infos
+ */
+struct radeon_tmds_pll_info {
+ long freq;
+ u32 value;
+};

/*
* This structure contains the various registers manipulated by this
@@ -301,6 +370,20 @@ struct radeonfb_info {
void __iomem *bios_seg;
int fp_bios_start;

+ int is_atom_bios;
+ int atom_data_start;
+
+ /* BIOS Functions */
+ int (*radeon_get_pll_info)(struct radeonfb_info *rinfo);
+ int (*radeon_get_lvds_info)(struct radeonfb_info *rinfo);
+ int (*radeon_get_conn_info)(struct radeonfb_info *rinfo);
+ int (*radeon_get_tmds_info)(struct radeonfb_info *rinfo);
+
+ /* Connector infos */
+ struct radeon_connector connectors[RADEON_MAX_CONNECTORS];
+ int heads[RADEON_MAX_CONNECTORS]; // index into connectors.
+ int num_heads; // number of heads.
+
u32 pseudo_palette[17];
struct { u8 red, green, blue, pad; }
palette[256];
@@ -319,15 +402,8 @@ struct radeonfb_info {
int has_CRTC2;
int is_mobility;
int is_IGP;
- int reversed_DAC;
- int reversed_TMDS;
struct panel_info panel_info;
- int mon1_type;
- u8 *mon1_EDID;
- struct fb_videomode *mon1_modedb;
- int mon1_dbsize;
- int mon2_type;
- u8 *mon2_EDID;
+ struct radeon_tmds_pll_info tmds_pll[4];

u32 dp_gui_master_cntl;

@@ -359,24 +435,19 @@ struct radeonfb_info {
};


-#define PRIMARY_MONITOR(rinfo) (rinfo->mon1_type)
+#define PRIMARY_HEAD(rinfo) (rinfo->connectors[rinfo->heads[0]])
+#define SECONDARY_HEAD(rinfo) (rinfo->connectors[rinfo->heads[1]])
+
+#define SECONDARY_HEAD_PRESENT(rinfo) (rinfo->heads[1] != -1)

+#define PRIMARY_MONITOR(rinfo) (rinfo->connectors[rinfo->heads[0]].mon_type)
+#define SECONDARY_MONITOR(rinfo) ((SECONDARY_HEAD_PRESENT(rinfo) ? (rinfo->connectors[rinfo->heads[1]].mon_type) : MT_NONE))

/*
* Debugging stuffs
*/
-#ifdef CONFIG_FB_RADEON_DEBUG
-#define DEBUG 1
-#else
-#define DEBUG 0
-#endif
-
-#if DEBUG
-#define RTRACE printk
-#else
-#define RTRACE if(0) printk
-#endif
-
+extern int radeonfb_debug;
+#define RTRACE if(radeonfb_debug) printk

/*
* IO macros
@@ -599,7 +670,7 @@ static inline void _radeon_engine_idle(struct radeonfb_info *rinfo)
/* I2C Functions */
extern void radeon_create_i2c_busses(struct radeonfb_info *rinfo);
extern void radeon_delete_i2c_busses(struct radeonfb_info *rinfo);
-extern int radeon_probe_i2c_connector(struct radeonfb_info *rinfo, int conn, u8 **out_edid);
+extern int radeon_probe_i2c_connector(struct radeonfb_info *rinfo, struct radeon_connector *conn);

/* PM Functions */
extern int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t state);
@@ -637,4 +708,18 @@ static inline void radeonfb_bl_init(struct radeonfb_info *rinfo) {}
static inline void radeonfb_bl_exit(struct radeonfb_info *rinfo) {}
#endif

+/* Bios functions. Fix this. */
+extern void __devinit radeon_get_conn_info(struct radeonfb_info *rinfo, int ignore_conntable);
+extern void __devinit radeon_get_tmds_info(struct radeonfb_info *rinfo);
+
+extern int __devinit radeon_get_lvds_info_atom(struct radeonfb_info *rinfo);
+extern int __devinit radeon_get_lvds_info_legacy(struct radeonfb_info *rinfo);
+extern int __devinit radeon_get_conn_info_atom(struct radeonfb_info *rinfo);
+extern int __devinit radeon_get_conn_info_legacy(struct radeonfb_info *rinfo);
+extern int __devinit radeon_get_tmds_info_legacy(struct radeonfb_info *rinfo);
+extern int __devinit radeon_get_tmds_info_atom(struct radeonfb_info *rinfo);
+#ifdef CONFIG_PPC_OF
+extern int __devinit radeon_get_lvds_info_openfirmware(struct radeonfb_info *rinfo);
+extern int __devinit radeon_get_conn_info_openfirmware(struct radeonfb_info *rinfo);
+#endif
#endif /* __RADEONFB_H__ */


Luca
--
"New processes are created by other processes, just like new
humans. New humans are created by other humans, of course,
not by processes." -- Unix System Administration Handbook
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-05-17 22:03    [from the cache]
©2003-2011 Jasper Spaans