lkml.org 
[lkml]   [2007]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 2.6.21] Usb Serial Keyspan: add support for USA-49WG & USA-28XG
Add support for Keyspan adapters:  USA-49WG and USA-28XG

Signed-off-by: Lucy P. McCoy <lucy@keyspan.com>
---
diff -uprN -X linux-2.6.21-vanilla/Documentation/dontdiff
linux-2.6.21-vanilla/drivers/usb/serial/keyspan.c
linux-2.6.21-lpm/drivers/usb/serial/keyspan.c
--- linux-2.6.21-vanilla/drivers/usb/serial/keyspan.c 2007-04-25
20:08:32.000000000 -0700
+++ linux-2.6.21-lpm/drivers/usb/serial/keyspan.c 2007-05-04
13:35:23.000000000 -0700
@@ -28,6 +28,9 @@

Change History

+ 2007may02 LPM (Keyspan) add support for the USA28XG and USA49WG.
+
+
2003sep04 LPM (Keyspan) add support for new single port product
USA19HS.
Improve setup message handling for all devices.

@@ -115,12 +118,13 @@ static int debug;
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.1.4"
+#define DRIVER_VERSION "v1.1.5"
#define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu"
#define DRIVER_DESC "Keyspan USB to Serial Converter Driver"

#define INSTAT_BUFLEN 32
#define GLOCONT_BUFLEN 64
+#define INDAT49W_BUFLEN 512

/* Per device and per port private data */
struct keyspan_serial_private {
@@ -129,9 +133,15 @@ struct keyspan_serial_private {
struct urb *instat_urb;
char instat_buf[INSTAT_BUFLEN];

+ /* added to support 49wg, where data from all 4 ports comes in on 1
EP */
+ /* and high-speed supported */
+ struct urb *indat_urb;
+ char indat_buf[INDAT49W_BUFLEN];
+
/* XXX this one probably will need a lock */
struct urb *glocont_urb;
char glocont_buf[GLOCONT_BUFLEN];
+ char ctrl_buf[8]; // for EP0 control message
};

struct keyspan_port_private {
@@ -179,12 +189,13 @@ struct keyspan_port_private {


/* Include Keyspan message headers. All current Keyspan Adapters
- make use of one of four message formats which are referred
- to as USA-26, USA-28 and USA-49, USA-90 by Keyspan and within this
driver. */
+ make use of one of five message formats which are referred
+ to as USA-26, USA-28, USA-49, USA-90, USA-67 by Keyspan and within
this driver. */
#include "keyspan_usa26msg.h"
#include "keyspan_usa28msg.h"
#include "keyspan_usa49msg.h"
#include "keyspan_usa90msg.h"
+#include "keyspan_usa67msg.h"


/* Functions used by new usb-serial code. */
@@ -850,6 +861,82 @@ static void usa49_indat_callback(struct
}
}

+
+static void usa49wg_indat_callback(struct urb *urb)
+{
+ int i, len, x, err;
+ struct usb_serial *serial;
+ struct usb_serial_port *port;
+
+ struct tty_struct *tty;
+ unsigned char *data = urb->transfer_buffer;
+
+
+ dbg ("%s", __FUNCTION__);
+
+ serial = (struct usb_serial *) urb->context;
+
+ if (urb->status) {
+ dbg("%s - nonzero status: %x", __FUNCTION__, urb->status);
+ return;
+ }
+
+ // inbound data is in the form P#, len, status, data */
+
+ i = len = 0;
+
+ if (urb->actual_length) {
+ while (i < urb->actual_length) {
+
+ /* Check port number from message*/
+ if (data[i] >= serial->num_ports) {
+ dbg ("%s - Unexpected port number %d", __FUNCTION__,
data[i]);
+ return;
+ }
+ port = serial->port[data[i++]];
+ tty = port->tty;
+ len = data[i++];
+
+ /* 0x80 bit is error flag */
+ if ((data[i] & 0x80) == 0) {
+ /* no error on any byte */
+ i++;
+ for (x = 1; x < len ; ++x)
+ if (port->open_count)
+ tty_insert_flip_char(tty, data[i++], 0);
+ else
+ i++;
+ }
+ else {
+ /* some bytes had errors, every byte has status */
+ for (x = 0; x + 1 < len; x += 2) {
+ int stat = data[i], flag = 0;
+ if (stat & RXERROR_OVERRUN)
+ flag |= TTY_OVERRUN;
+ if (stat & RXERROR_FRAMING)
+ flag |= TTY_FRAME;
+ if (stat & RXERROR_PARITY)
+ flag |= TTY_PARITY;
+ /* XXX should handle break (0x10) */
+ if (port->open_count)
+ tty_insert_flip_char(tty, data[i+1], flag);
+ i+=2;
+ }
+ }
+ if (port->open_count)
+ tty_flip_buffer_push(tty);
+ }
+ }
+
+ /* Resubmit urb so we continue receiving */
+ urb->dev = serial->dev;
+
+ if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
+ dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ }
+}
+
+
/* not used, usa-49 doesn't have per-port control endpoints */
static void usa49_outcont_callback(struct urb *urb)
{
@@ -995,6 +1082,88 @@ static void usa90_outcont_callback(struc
}
}

+
+
+/* Status messages from the 28xg */
+static void usa67_instat_callback(struct urb *urb)
+{
+ int err;
+ unsigned char *data = urb->transfer_buffer;
+ struct keyspan_usa67_portStatusMessage *msg;
+ struct usb_serial *serial;
+ struct usb_serial_port *port;
+ struct keyspan_port_private *p_priv;
+ int old_dcd_state;
+
+ dbg ("%s", __FUNCTION__);
+
+ serial = (struct usb_serial *) urb->context;
+
+ if (urb->status) {
+ dbg("%s - nonzero status: %x", __FUNCTION__, urb->status);
+ return;
+ }
+
+ if (urb->actual_length != sizeof(struct
keyspan_usa67_portStatusMessage)) {
+ dbg("%s - bad length %d", __FUNCTION__, urb->actual_length);
+ return;
+ }
+
+
+ /* Now do something useful with the data */
+ msg = (struct keyspan_usa67_portStatusMessage *)data;
+
+ /* Check port number from message and retrieve private data */
+ if (msg->port >= serial->num_ports) {
+ dbg ("%s - Unexpected port number %d", __FUNCTION__, msg->port);
+ return;
+ }
+
+ port = serial->port[msg->port];
+ p_priv = usb_get_serial_port_data(port);
+
+ /* Update handshaking pin state information */
+ old_dcd_state = p_priv->dcd_state;
+ p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
+ p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
+
+ if (port->tty && !C_CLOCAL(port->tty)
+ && old_dcd_state != p_priv->dcd_state) {
+ if (old_dcd_state)
+ tty_hangup(port->tty);
+ /* else */
+ /* wake_up_interruptible(&p_priv->open_wait); */
+ }
+
+ /* Resubmit urb so we continue receiving */
+ urb->dev = serial->dev;
+ if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
+ dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ }
+}
+
+static void usa67_glocont_callback(struct urb *urb)
+{
+ struct usb_serial *serial;
+ struct usb_serial_port *port;
+ struct keyspan_port_private *p_priv;
+ int i;
+
+ dbg ("%s", __FUNCTION__);
+
+ serial = (struct usb_serial *) urb->context;
+ for (i = 0; i < serial->num_ports; ++i) {
+ port = serial->port[i];
+ p_priv = usb_get_serial_port_data(port);
+
+ if (p_priv->resend_cont) {
+ dbg ("%s - sending setup", __FUNCTION__);
+ keyspan_usa67_send_setup(serial, port, p_priv->resend_cont
- 1);
+ break;
+ }
+ }
+}
+
static int keyspan_write_room (struct usb_serial_port *port)
{
struct keyspan_port_private *p_priv;
@@ -1311,6 +1480,11 @@ static struct urb *keyspan_setup_urb (st
return NULL;
}

+ if (endpoint == 0) {
+ /* control EP filled in when used */
+ return urb;
+ }
+
ep_desc = find_ep(serial, endpoint);
if (!ep_desc) {
/* leak the urb, something's wrong and the callers don't care */
@@ -1380,6 +1554,14 @@ static struct callbacks {
.outdat_callback = usa2x_outdat_callback,
.inack_callback = usa28_inack_callback,
.outcont_callback = usa90_outcont_callback,
+ }, {
+ /* msg_usa67 callbacks */
+ .instat_callback = usa67_instat_callback,
+ .glocont_callback = usa67_glocont_callback,
+ .indat_callback = usa26_indat_callback,
+ .outdat_callback = usa2x_outdat_callback,
+ .inack_callback = usa26_inack_callback,
+ .outcont_callback = usa26_outcont_callback,
}
};

@@ -1410,6 +1592,11 @@ static void keyspan_setup_urbs(struct us
serial, s_priv->instat_buf, INSTAT_BUFLEN,
cback->instat_callback);

+ s_priv->indat_urb = keyspan_setup_urb
+ (serial, d_details->indat_endpoint, USB_DIR_IN,
+ serial, s_priv->indat_buf, INDAT49W_BUFLEN,
+ usa49wg_indat_callback);
+
s_priv->glocont_urb = keyspan_setup_urb
(serial, d_details->glocont_endpoint, USB_DIR_OUT,
serial, s_priv->glocont_buf, GLOCONT_BUFLEN,
@@ -1685,8 +1872,8 @@ static int keyspan_usa26_send_setup(stru
}

/* Save reset port val for resend.
- Don't overwrite resend for close condition. */
- if (p_priv->resend_cont != 3)
+ Don't overwrite resend for open/close condition. */
+ if ((reset_port+1) > p_priv->resend_cont)
p_priv->resend_cont = reset_port + 1;
if (this_urb->status == -EINPROGRESS) {
/* dbg ("%s - already writing", __FUNCTION__); */
@@ -1836,8 +2023,8 @@ static int keyspan_usa28_send_setup(stru
}

/* Save reset port val for resend.
- Don't overwrite resend for close condition. */
- if (p_priv->resend_cont != 3)
+ Don't overwrite resend for open/close condition. */
+ if ((reset_port+1) > p_priv->resend_cont)
p_priv->resend_cont = reset_port + 1;
if (this_urb->status == -EINPROGRESS) {
dbg ("%s already writing", __FUNCTION__);
@@ -1940,21 +2127,22 @@ static int keyspan_usa49_send_setup(stru
struct usb_serial_port *port,
int reset_port)
{
- struct keyspan_usa49_portControlMessage msg;
+ struct keyspan_usa49_portControlMessage msg;
+ struct usb_ctrlrequest *dr = NULL;
struct keyspan_serial_private *s_priv;
struct keyspan_port_private *p_priv;
const struct keyspan_device_details *d_details;
- int glocont_urb;
struct urb *this_urb;
int err, device_port;

+
+
dbg ("%s", __FUNCTION__);

s_priv = usb_get_serial_data(serial);
p_priv = usb_get_serial_port_data(port);
d_details = s_priv->device_details;

- glocont_urb = d_details->glocont_endpoint;
this_urb = s_priv->glocont_urb;

/* Work out which port within the device is being setup */
@@ -1968,10 +2156,12 @@ static int keyspan_usa49_send_setup(stru
return -1;
}

+
/* Save reset port val for resend.
- Don't overwrite resend for close condition. */
- if (p_priv->resend_cont != 3)
+ Don't overwrite resend for open/close condition. */
+ if ((reset_port+1) > p_priv->resend_cont)
p_priv->resend_cont = reset_port + 1;
+
if (this_urb->status == -EINPROGRESS) {
/* dbg ("%s - already writing", __FUNCTION__); */
mdelay(5);
@@ -2083,20 +2273,40 @@ static int keyspan_usa49_send_setup(stru
msg.dtr = p_priv->dtr_state;

p_priv->resend_cont = 0;
- memcpy (this_urb->transfer_buffer, &msg, sizeof(msg));
+
+ /* if the device is a 49wg, we send control message on usb control
EP 0 */
+
+ if (d_details->product_id == keyspan_usa49wg_product_id) {
+ dr = (void *)(s_priv->ctrl_buf);
+ dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT;
+ dr->bRequest = 0xB0; /* 49wg control message */;
+ dr->wValue = 0;
+ dr->wIndex = 0;
+ dr->wLength = cpu_to_le16(sizeof(msg));
+
+ memcpy (s_priv->glocont_buf, &msg, sizeof(msg));
+
+ usb_fill_control_urb(this_urb, serial->dev,
usb_sndctrlpipe(serial->dev, 0),
+ (unsigned char *)dr, s_priv->glocont_buf, sizeof(msg),
+ usa49_glocont_callback, serial);
+
+ }
+ else {
+ memcpy (this_urb->transfer_buffer, &msg, sizeof(msg));

- /* send the data out the device on control endpoint */
- this_urb->transfer_buffer_length = sizeof(msg);
+ /* send the data out the device on control endpoint */
+ this_urb->transfer_buffer_length = sizeof(msg);

- this_urb->dev = serial->dev;
+ this_urb->dev = serial->dev;
+ }
if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) {
dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__, err);
}
#if 0
else {
dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __FUNCTION__,
- outcont_urb, this_urb->transfer_buffer_length,
- usb_pipeendpoint(this_urb->pipe));
+ outcont_urb, this_urb->transfer_buffer_length,
+ usb_pipeendpoint(this_urb->pipe));
}
#endif

@@ -2241,6 +2451,157 @@ static int keyspan_usa90_send_setup(stru
return (0);
}

+static int keyspan_usa67_send_setup(struct usb_serial *serial,
+ struct usb_serial_port *port,
+ int reset_port)
+{
+ struct keyspan_usa67_portControlMessage msg;
+ struct keyspan_serial_private *s_priv;
+ struct keyspan_port_private *p_priv;
+ const struct keyspan_device_details *d_details;
+ struct urb *this_urb;
+ int err, device_port;
+
+ dbg ("%s", __FUNCTION__);
+
+ s_priv = usb_get_serial_data(serial);
+ p_priv = usb_get_serial_port_data(port);
+ d_details = s_priv->device_details;
+
+ this_urb = s_priv->glocont_urb;
+
+ /* Work out which port within the device is being setup */
+ device_port = port->number - port->serial->minor;
+
+ /* Make sure we have an urb then send the message */
+ if (this_urb == NULL) {
+ dbg("%s - oops no urb for port %d.", __FUNCTION__, port->number);
+ return -1;
+ }
+
+ /* Save reset port val for resend.
+ Don't overwrite resend for open/close condition. */
+ if ((reset_port + 1) > p_priv->resend_cont)
+ p_priv->resend_cont = reset_port + 1;
+ if (this_urb->status == -EINPROGRESS) {
+ /* dbg ("%s - already writing", __FUNCTION__); */
+ mdelay(5);
+ return(-1);
+ }
+
+ memset(&msg, 0, sizeof (struct keyspan_usa67_portControlMessage));
+
+ msg.port = device_port;
+
+ /* Only set baud rate if it's changed */
+ if (p_priv->old_baud != p_priv->baud) {
+ p_priv->old_baud = p_priv->baud;
+ msg.setClocking = 0xff;
+ if (d_details->calculate_baud_rate
+ (p_priv->baud, d_details->baudclk, &msg.baudHi,
+ &msg.baudLo, &msg.prescaler, device_port) ==
KEYSPAN_INVALID_BAUD_RATE ) {
+ dbg("%s - Invalid baud rate %d requested, using 9600.",
__FUNCTION__,
+ p_priv->baud);
+ msg.baudLo = 0;
+ msg.baudHi = 125; /* Values for 9600 baud */
+ msg.prescaler = 10;
+ }
+ msg.setPrescaler = 0xff;
+ }
+
+ msg.lcr = (p_priv->cflag & CSTOPB)? STOPBITS_678_2: STOPBITS_5678_1;
+ switch (p_priv->cflag & CSIZE) {
+ case CS5:
+ msg.lcr |= USA_DATABITS_5;
+ break;
+ case CS6:
+ msg.lcr |= USA_DATABITS_6;
+ break;
+ case CS7:
+ msg.lcr |= USA_DATABITS_7;
+ break;
+ case CS8:
+ msg.lcr |= USA_DATABITS_8;
+ break;
+ }
+ if (p_priv->cflag & PARENB) {
+ /* note USA_PARITY_NONE == 0 */
+ msg.lcr |= (p_priv->cflag & PARODD)?
+ USA_PARITY_ODD: USA_PARITY_EVEN;
+ }
+ msg.setLcr = 0xff;
+
+ msg.ctsFlowControl = (p_priv->flow_control == flow_cts);
+ msg.xonFlowControl = 0;
+ msg.setFlowControl = 0xff;
+ msg.forwardingLength = 16;
+ msg.xonChar = 17;
+ msg.xoffChar = 19;
+
+ /* Opening port */
+ if (reset_port == 1) {
+ msg._txOn = 1;
+ msg._txOff = 0;
+ msg.txFlush = 0;
+ msg.txBreak = 0;
+ msg.rxOn = 1;
+ msg.rxOff = 0;
+ msg.rxFlush = 1;
+ msg.rxForward = 0;
+ msg.returnStatus = 0;
+ msg.resetDataToggle = 0xff;
+ }
+
+ /* Closing port */
+ else if (reset_port == 2) {
+ msg._txOn = 0;
+ msg._txOff = 1;
+ msg.txFlush = 0;
+ msg.txBreak = 0;
+ msg.rxOn = 0;
+ msg.rxOff = 1;
+ msg.rxFlush = 1;
+ msg.rxForward = 0;
+ msg.returnStatus = 0;
+ msg.resetDataToggle = 0;
+ }
+
+ /* Sending intermediate configs */
+ else {
+ msg._txOn = (! p_priv->break_on);
+ msg._txOff = 0;
+ msg.txFlush = 0;
+ msg.txBreak = (p_priv->break_on);
+ msg.rxOn = 0;
+ msg.rxOff = 0;
+ msg.rxFlush = 0;
+ msg.rxForward = 0;
+ msg.returnStatus = 0;
+ msg.resetDataToggle = 0x0;
+ }
+
+ /* Do handshaking outputs */
+ msg.setTxTriState_setRts = 0xff;
+ msg.txTriState_rts = p_priv->rts_state;
+
+ msg.setHskoa_setDtr = 0xff;
+ msg.hskoa_dtr = p_priv->dtr_state;
+
+ p_priv->resend_cont = 0;
+
+ memcpy (this_urb->transfer_buffer, &msg, sizeof(msg));
+
+ /* send the data out the device on control endpoint */
+ this_urb->transfer_buffer_length = sizeof(msg);
+ this_urb->dev = serial->dev;
+
+ if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) {
+ dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__, err);
+ }
+
+ return (0);
+}
+
static void keyspan_send_setup(struct usb_serial_port *port, int
reset_port)
{
struct usb_serial *serial = port->serial;
@@ -2265,6 +2626,9 @@ static void keyspan_send_setup(struct us
case msg_usa90:
keyspan_usa90_send_setup(serial, port, reset_port);
break;
+ case msg_usa67:
+ keyspan_usa67_send_setup(serial, port, reset_port);
+ break;
}
}

@@ -2313,9 +2677,17 @@ static int keyspan_startup (struct usb_s

keyspan_setup_urbs(serial);

- s_priv->instat_urb->dev = serial->dev;
- if ((err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL)) != 0) {
- dbg("%s - submit instat urb failed %d", __FUNCTION__, err);
+ if (s_priv->instat_urb != NULL) {
+ s_priv->instat_urb->dev = serial->dev;
+ if ((err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL)) != 0) {
+ dbg("%s - submit instat urb failed %d", __FUNCTION__, err);
+ }
+ }
+ if (s_priv->indat_urb != NULL) {
+ s_priv->indat_urb->dev = serial->dev;
+ if ((err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL)) != 0) {
+ dbg("%s - submit indat urb failed %d", __FUNCTION__, err);
+ }
}

return (0);
@@ -2335,6 +2707,7 @@ static void keyspan_shutdown (struct usb
/* Stop reading/writing urbs */
stop_urb(s_priv->instat_urb);
stop_urb(s_priv->glocont_urb);
+ stop_urb(s_priv->indat_urb);
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
p_priv = usb_get_serial_port_data(port);
@@ -2348,6 +2721,7 @@ static void keyspan_shutdown (struct usb

/* Now free them */
usb_free_urb(s_priv->instat_urb);
+ usb_free_urb(s_priv->indat_urb);
usb_free_urb(s_priv->glocont_urb);
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
diff -uprN -X linux-2.6.21-vanilla/Documentation/dontdiff
linux-2.6.21-vanilla/drivers/usb/serial/keyspan.h
linux-2.6.21-lpm/drivers/usb/serial/keyspan.h
--- linux-2.6.21-vanilla/drivers/usb/serial/keyspan.h 2007-04-25
20:08:32.000000000 -0700
+++ linux-2.6.21-lpm/drivers/usb/serial/keyspan.h 2007-05-01
14:14:53.000000000 -0700
@@ -99,6 +99,10 @@ static int keyspan_usa90_send_setup (st
struct usb_serial_port *port,
int reset_port);

+static int keyspan_usa67_send_setup (struct usb_serial *serial,
+ struct usb_serial_port *port,
+ int reset_port);
+
/* Struct used for firmware - increased size of data section
to allow Keyspan's 'C' firmware struct to be used unmodified */
struct ezusb_hex_record {
@@ -229,15 +233,17 @@ struct ezusb_hex_record {
#define keyspan_usa28_product_id 0x010f
#define keyspan_usa28x_product_id 0x0110
#define keyspan_usa28xa_product_id 0x0115
+#define keyspan_usa28xb_product_id 0x0110
+#define keyspan_usa28xg_product_id 0x0135
#define keyspan_usa49w_product_id 0x010a
#define keyspan_usa49wlc_product_id 0x012a
-
+#define keyspan_usa49wg_product_id 0x0131

struct keyspan_device_details {
/* product ID value */
int product_id;

- enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90} msg_format;
+ enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90, msg_usa67}
msg_format;

/* Number of physical ports */
int num_ports;
@@ -264,6 +270,9 @@ struct keyspan_device_details {
/* Endpoint used for input status */
int instat_endpoint;

+ /* Endpoint used for input data 49WG only */
+ int indat_endpoint;
+
/* Endpoint used for global control functions */
int glocont_endpoint;

@@ -287,6 +296,7 @@ static const struct keyspan_device_detai
.inack_endpoints = {0x85},
.outcont_endpoints = {0x05},
.instat_endpoint = 0x87,
+ .indat_endpoint = -1,
.glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA18X_BAUDCLK,
@@ -303,6 +313,7 @@ static const struct keyspan_device_detai
.inack_endpoints = {0x83},
.outcont_endpoints = {0x03},
.instat_endpoint = 0x84,
+ .indat_endpoint = -1,
.glocont_endpoint = -1,
.calculate_baud_rate = keyspan_usa19_calc_baud,
.baudclk = KEYSPAN_USA19_BAUDCLK,
@@ -319,6 +330,7 @@ static const struct keyspan_device_detai
.inack_endpoints = {0x83},
.outcont_endpoints = {0x03},
.instat_endpoint = 0x84,
+ .indat_endpoint = -1,
.glocont_endpoint = -1,
.calculate_baud_rate = keyspan_usa28_calc_baud,
.baudclk = KEYSPAN_USA19_BAUDCLK,
@@ -335,6 +347,7 @@ static const struct keyspan_device_detai
.inack_endpoints = {0x83},
.outcont_endpoints = {0x03},
.instat_endpoint = 0x84,
+ .indat_endpoint = -1,
.glocont_endpoint = -1,
.calculate_baud_rate = keyspan_usa28_calc_baud,
.baudclk = KEYSPAN_USA19_BAUDCLK,
@@ -351,6 +364,7 @@ static const struct keyspan_device_detai
.inack_endpoints = {0x85},
.outcont_endpoints = {0x05},
.instat_endpoint = 0x87,
+ .indat_endpoint = -1,
.glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA19W_BAUDCLK,
@@ -367,6 +381,7 @@ static const struct keyspan_device_detai
.inack_endpoints = {0x85},
.outcont_endpoints = {0x05},
.instat_endpoint = 0x87,
+ .indat_endpoint = -1,
.glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA19W_BAUDCLK,
@@ -383,6 +398,7 @@ static const struct keyspan_device_detai
.inack_endpoints = {-1},
.outcont_endpoints = {0x02},
.instat_endpoint = 0x82,
+ .indat_endpoint = -1,
.glocont_endpoint = -1,
.calculate_baud_rate = keyspan_usa19hs_calc_baud,
.baudclk = KEYSPAN_USA19HS_BAUDCLK,
@@ -399,6 +415,7 @@ static const struct keyspan_device_detai
.inack_endpoints = {0x85, 0x86},
.outcont_endpoints = {0x05, 0x06},
.instat_endpoint = 0x87,
+ .indat_endpoint = -1,
.glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa28_calc_baud,
.baudclk = KEYSPAN_USA28_BAUDCLK,
@@ -415,6 +432,7 @@ static const struct keyspan_device_detai
.inack_endpoints = {0x85, 0x86},
.outcont_endpoints = {0x05, 0x06},
.instat_endpoint = 0x87,
+ .indat_endpoint = -1,
.glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA28X_BAUDCLK,
@@ -431,11 +449,28 @@ static const struct keyspan_device_detai
.inack_endpoints = {0x85, 0x86},
.outcont_endpoints = {0x05, 0x06},
.instat_endpoint = 0x87,
+ .indat_endpoint = -1,
.glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA28X_BAUDCLK,
};

+static const struct keyspan_device_details usa28xg_device_details = {
+ .product_id = keyspan_usa28xg_product_id,
+ .msg_format = msg_usa67,
+ .num_ports = 2,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 0,
+ .indat_endpoints = {0x84, 0x88},
+ .outdat_endpoints = {0x02, 0x06},
+ .inack_endpoints = {-1, -1},
+ .outcont_endpoints = {-1, -1},
+ .instat_endpoint = 0x81,
+ .indat_endpoint = -1,
+ .glocont_endpoint = 0x01,
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA28X_BAUDCLK,
+};
/* We don't need a separate entry for the usa28xb as it appears as a
28x anyway */

static const struct keyspan_device_details usa49w_device_details = {
@@ -449,6 +484,7 @@ static const struct keyspan_device_detai
.inack_endpoints = {-1, -1, -1, -1},
.outcont_endpoints = {-1, -1, -1, -1},
.instat_endpoint = 0x87,
+ .indat_endpoint = -1,
.glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA49W_BAUDCLK,
@@ -465,11 +501,29 @@ static const struct keyspan_device_detai
.inack_endpoints = {-1, -1, -1, -1},
.outcont_endpoints = {-1, -1, -1, -1},
.instat_endpoint = 0x87,
+ .indat_endpoint = -1,
.glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA19W_BAUDCLK,
};

+static const struct keyspan_device_details usa49wg_device_details = {
+ .product_id = keyspan_usa49wg_product_id,
+ .msg_format = msg_usa49,
+ .num_ports = 4,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 0,
+ .indat_endpoints = {-1, -1, -1, -1}, /* single 'global'
data in EP */
+ .outdat_endpoints = {0x01, 0x02, 0x04, 0x06},
+ .inack_endpoints = {-1, -1, -1, -1},
+ .outcont_endpoints = {-1, -1, -1, -1},
+ .instat_endpoint = 0x81,
+ .indat_endpoint = 0x88,
+ .glocont_endpoint = 0x00, /* uses control EP */
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA19W_BAUDCLK,
+};
+
static const struct keyspan_device_details *keyspan_devices[] = {
&usa18x_device_details,
&usa19_device_details,
@@ -481,9 +535,11 @@ static const struct keyspan_device_detai
&usa28_device_details,
&usa28x_device_details,
&usa28xa_device_details,
+ &usa28xg_device_details,
/* 28xb not required as it renumerates as a 28x */
&usa49w_device_details,
&usa49wlc_device_details,
+ &usa49wg_device_details,
NULL,
};

@@ -510,8 +566,11 @@ static struct usb_device_id keyspan_ids_
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)},
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
{ } /* Terminating entry */
};

@@ -557,12 +616,15 @@ static struct usb_device_id keyspan_2por
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
{ } /* Terminating entry */
};

static struct usb_device_id keyspan_4port_ids[] = {
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
{ } /* Terminating entry */
};

@@ -573,7 +635,6 @@ static struct usb_serial_driver keyspan_
.name = "keyspan_no_firm",
},
.description = "Keyspan - (without firmware)",
- .usb_driver = &keyspan_driver,
.id_table = keyspan_pre_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -588,7 +649,6 @@ static struct usb_serial_driver keyspan_
.name = "keyspan_1",
},
.description = "Keyspan 1 port adapter",
- .usb_driver = &keyspan_driver,
.id_table = keyspan_1port_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -616,7 +676,6 @@ static struct usb_serial_driver keyspan_
.name = "keyspan_2",
},
.description = "Keyspan 2 port adapter",
- .usb_driver = &keyspan_driver,
.id_table = keyspan_2port_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -644,11 +703,10 @@ static struct usb_serial_driver keyspan_
.name = "keyspan_4",
},
.description = "Keyspan 4 port adapter",
- .usb_driver = &keyspan_driver,
.id_table = keyspan_4port_ids,
.num_interrupt_in = NUM_DONT_CARE,
- .num_bulk_in = 5,
- .num_bulk_out = 5,
+ .num_bulk_in = NUM_DONT_CARE,
+ .num_bulk_out = NUM_DONT_CARE,
.num_ports = 4,
.open = keyspan_open,
.close = keyspan_close,
diff -uprN -X linux-2.6.21-vanilla/Documentation/dontdiff
linux-2.6.21-vanilla/drivers/usb/serial/keyspan_usa67msg.h
linux-2.6.21-lpm/drivers/usb/serial/keyspan_usa67msg.h
--- linux-2.6.21-vanilla/drivers/usb/serial/keyspan_usa67msg.h
1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.21-lpm/drivers/usb/serial/keyspan_usa67msg.h 2007-05-03
17:07:08.000000000 -0700
@@ -0,0 +1,254 @@
+/*
+ usa67msg.h
+
+ Copyright (c) 1998-2007 InnoSys Incorporated. All Rights Reserved
+ This file is available under a BSD-style copyright
+
+ Keyspan USB Async Firmware to run on Anchor FX1
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are
+ met:
+
+ 1. Redistributions of source code must retain this licence text
+ without modification, this list of conditions, and the following
+ disclaimer. The following copyright notice must appear
immediately at
+ the beginning of all source files:
+
+ Copyright (c) 1998-2007 InnoSys Incorporated. All Rights
Reserved
+
+ This file is available under a BSD-style copyright
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. The name of InnoSys Incorprated may not be used to endorse or
promote
+ products derived from this software without specific prior written
+ permission.
+
+ THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR
+ IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES
+ OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN
+ NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+ INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+ Fourth revision: This message format supports the USA28XG
+
+ Buffer formats for RX/TX data messages are not defined by
+ a structure, but are described here:
+
+ USB OUT (host -> USAxx, transmit) messages contain a
+ REQUEST_ACK indicator (set to 0xff to request an ACK at the
+ completion of transmit; 0x00 otherwise), followed by data:
+
+ RQSTACK DAT DAT DAT ...
+
+ with a total data length of up to 63.
+
+ USB IN (USAxx -> host, receive) messages begin with a status
+ byte in which the 0x80 bit is either:
+
+ (a) 0x80 bit clear
+ indicates that the bytes following it are all data
+ bytes:
+
+ STAT DATA DATA DATA DATA DATA ...
+
+ for a total of up to 63 DATA bytes,
+
+ or:
+
+ (b) 0x80 bit set
+ indiates that the bytes following alternate data and
+ status bytes:
+
+ STAT DATA STAT DATA STAT DATA STAT DATA ...
+
+ for a total of up to 32 DATA bytes.
+
+ The valid bits in the STAT bytes are:
+
+ OVERRUN 0x02
+ PARITY 0x04
+ FRAMING 0x08
+ BREAK 0x10
+
+ Notes:
+
+ (1) The OVERRUN bit can appear in either (a) or (b) format
+ messages, but the but the PARITY/FRAMING/BREAK bits
+ only appear in (b) format messages.
+ (2) For the host to determine the exact point at which the
+ overrun occurred (to identify the point in the data
+ stream at which the data was lost), it needs to count
+ 128 characters, starting at the first character of the
+ message in which OVERRUN was reported; the lost character(s)
+ would have been received between the 128th and 129th
+ characters.
+ (3) An RX data message in which the first byte has 0x80 clear
+ serves as a "break off" indicator.
+
+ revision history:
+
+ 1999feb10 add reportHskiaChanges to allow us to ignore them
+ 1999feb10 add txAckThreshold for fast+loose throughput enhancement
+ 1999mar30 beef up support for RX error reporting
+ 1999apr14 add resetDataToggle to control message
+ 2000jan04 merge with usa17msg.h
+ 2000jun01 add extended BSD-style copyright text
+ 2001jul05 change message format to improve OVERRUN case
+ 2002jun05 update copyright date, improve comments
+ 2006feb06 modify for FX1 chip
+
+*/
+
+#ifndef __USA67MSG__
+#define __USA67MSG__
+
+
+// all things called "ControlMessage" are sent on the 'control' endpoint
+
+typedef struct keyspan_usa67_portControlMessage
+{
+ u8 port; // 0 or 1 (selects port)
+ /*
+ there are three types of "commands" sent in the control message:
+
+ 1. configuration changes which must be requested by setting
+ the corresponding "set" flag (and should only be requested
+ when necessary, to reduce overhead on the device):
+ */
+ u8 setClocking, // host requests baud rate be set
+ baudLo, // host does baud divisor calculation
+ baudHi, // baudHi is only used for first port (gives
lower rates)
+ externalClock_txClocking,
+ // 0=internal, other=external
+
+ setLcr, // host requests lcr be set
+ lcr, // use PARITY, STOPBITS, DATABITS below
+
+ setFlowControl, // host requests flow control be set
+ ctsFlowControl, // 1=use CTS flow control, 0=don't
+ xonFlowControl, // 1=use XON/XOFF flow control, 0=don't
+ xonChar, // specified in current character format
+ xoffChar, // specified in current character format
+
+ setTxTriState_setRts,
+ // host requests TX tri-state be set
+ txTriState_rts, // 1=active (normal), 0=tristate (off)
+
+ setHskoa_setDtr,
+ // host requests HSKOA output be set
+ hskoa_dtr, // 1=on, 0=off
+
+ setPrescaler, // host requests prescalar be set (default: 13)
+ prescaler; // specified as N/8; values 8-ff are valid
+ // must be set any time internal baud rate is set;
+ // must not be set when external clocking is used
+
+ /*
+ 3. configuration data which is simply used as is (no overhead,
+ but must be specified correctly in every host message).
+ */
+ u8 forwardingLength, // forward when this number of chars available
+ reportHskiaChanges_dsrFlowControl,
+ // 1=normal; 0=ignore external clock
+ // 1=use DSR flow control, 0=don't
+ txAckThreshold, // 0=not allowed, 1=normal, 2-255 deliver
ACK faster
+ loopbackMode; // 0=no loopback, 1=loopback enabled
+
+ /*
+ 4. commands which are flags only; these are processed in order
+ (so that, e.g., if both _txOn and _txOff flags are set, the
+ port ends in a TX_OFF state); any non-zero value is respected
+ */
+ u8 _txOn, // enable transmitting (and continue if
there's data)
+ _txOff, // stop transmitting
+ txFlush, // toss outbound data
+ txBreak, // turn on break (cleared by _txOn)
+ rxOn, // turn on receiver
+ rxOff, // turn off receiver
+ rxFlush, // toss inbound data
+ rxForward, // forward all inbound data, NOW (as if
fwdLen==1)
+ returnStatus, // return current status (even if it hasn't
changed)
+ resetDataToggle;// reset data toggle state to DATA0
+
+} keyspan_usa67_portControlMessage;
+
+// defines for bits in lcr
+#define USA_DATABITS_5 0x00
+#define USA_DATABITS_6 0x01
+#define USA_DATABITS_7 0x02
+#define USA_DATABITS_8 0x03
+#define STOPBITS_5678_1 0x00 // 1 stop bit for all byte sizes
+#define STOPBITS_5_1p5 0x04 // 1.5 stop bits for 5-bit byte
+#define STOPBITS_678_2 0x04 // 2 stop bits for 6/7/8-bit byte
+#define USA_PARITY_NONE 0x00
+#define USA_PARITY_ODD 0x08
+#define USA_PARITY_EVEN 0x18
+#define PARITY_1 0x28
+#define PARITY_0 0x38
+
+// all things called "StatusMessage" are sent on the status endpoint
+
+typedef struct keyspan_usa67_portStatusMessage // one for each port
+{
+ u8 port, // 0=first, 1=second, other=see below
+ hskia_cts, // reports HSKIA pin
+ gpia_dcd, // reports GPIA pin
+ _txOff, // port has been disabled (by host)
+ _txXoff, // port is in XOFF state (either host or RX XOFF)
+ txAck, // indicates a TX message acknowledgement
+ rxEnabled, // as configured by rxOn/rxOff 1=on, 0=off
+ controlResponse;// 1=a control message has been processed
+} keyspan_usa67_portStatusMessage;
+
+// bits in RX data message when STAT byte is included
+#define RXERROR_OVERRUN 0x02
+#define RXERROR_PARITY 0x04
+#define RXERROR_FRAMING 0x08
+#define RXERROR_BREAK 0x10
+
+typedef struct keyspan_usa67_globalControlMessage
+{
+ u8 port, // 3
+ sendGlobalStatus, // 2=request for two status responses
+ resetStatusToggle, // 1=reset global status toggle
+ resetStatusCount; // a cycling value
+} keyspan_usa67_globalControlMessage;
+
+typedef struct keyspan_usa67_globalStatusMessage
+{
+ u8 port, // 3
+ sendGlobalStatus, // from request, decremented
+ resetStatusCount; // as in request
+} keyspan_usa67_globalStatusMessage;
+
+typedef struct keyspan_usa67_globalDebugMessage
+{
+ u8 port, // 2
+ a,
+ b,
+ c,
+ d;
+} keyspan_usa67_globalDebugMessage;
+
+// ie: the maximum length of an FX1 endpoint buffer
+#define MAX_DATA_LEN 64
+
+// update status approx. 60 times a second (16.6666 ms)
+#define STATUS_UPDATE_INTERVAL 16
+
+// status rationing tuning value (each port gets checked each n ms)
+#define STATUS_RATION 10
+
+#endif
+
+
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-05-16 00:55    [W:2.719 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site