lkml.org 
[lkml]   [2007]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: Linux 2.6.22-rc1
    Hi Jean!

    2007/5/14, Jean Delvare <khali@linux-fr.org>:

    > > Sure. On 2.6.21.1:
    > >
    > > via686a-isa-6000
    > > Adapter: ISA adapter
    > > CPU core: +1.63 V (min = +0.06 V, max = +3.10 V)
    > > +2.5V: +2.45 V (min = +0.06 V, max = +3.10 V)
    > > I/O: +3.52 V (min = +3.12 V, max = +3.45 V) ALARM
    > > +5V: +5.05 V (min = +4.73 V, max = +5.20 V)
    > > +12V: +12.30 V (min = +11.35 V, max = +12.48 V)
    > > CPU Fan: 0 RPM (min = 42187 RPM, div = 2)
    > > P/S Fan: 2657 RPM (min = 42187 RPM, div = 2) ALARM
    >
    > Hint: increase the fan clock dividers to 4.
    >

    I've not found an obvious way to set it in sensors.conf. Could you
    point me to some doumentation, thanks.

    > > while on 2.6.22-rc1:
    > >
    > > via686a-i2c-9191-6000
    > > ERROR: Can't get adapter or algorithm?!?
    >
    > Ah, interesting. Could it be that the gnome applet quits because it
    > fails to get the adapter name? That wouldn't be very smart, but that's
    > possible.

    Just for the record. Does not quit. It displays on the panel "Chip not found.".

    > This is a side effect of an i2c-core cleanup. This is already fixed in
    > lm_sensors 2.10.3 (libsensors.so.3.1.3). Care to give it a try and
    > confirm it fixes the problem? Note that it might be a bit tricky to get
    > the gnome applet to use your own libsensors rather than the system one.
    > You might need to set the LD_LIBRARY_PATH environment variable before
    > the applet starts, or something similar.

    Luckily the 2.10.3 lm-sensors version is on unstable. The backport to
    Debian Etch was straightforward. Now the applet works again! And the
    P/S fan indicator (you may have noted that showed 0 in the 2.6.22-rc1
    case) works too. Many thanks ;-).

    Is this new version required only for the via686 chip or should be a
    general advise for Debian Etch users to upgrade to lm-sensors >=
    2.10.3 for kernels >= 2.6.22?


    ~ Antonio
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2007-05-14 18:07    [W:0.031 / U:0.672 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site