lkml.org 
[lkml]   [2007]   [May]   [10]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
/
DateThu, 10 May 2007 13:46:53 +0800
From"Quan Sun" <>
SubjectDifferent scheduler behavior between 2.4 and 2.6
Hi,
  Recently I met a problem on different scheduler behavior between
2.4.22 and 2.6.18.8.
  The application works as a proxy, it listen on an interface,
connect through another interface. This application works on a box
with two Xeon cpu, each of them is hyper-threading.
  On 2.4.22, CPU0 serve interrupts, the application works on other
three CPUs.
  But on 2.6.18.8, if I turn on 'noirqbalance' kernel parameter, and no
irqbalance  process, the application will stuck to CPU0 as well as interrupts
after several seconds' working. Then there will be a 0% idle cpu, and
three 100%idle CPUs.

 /proc/interrupt shows all eths's interrupts are working at CPU0.

 It seems that scheduler ignores the working load of interrupts.

  My question is, is there a way to tune 2.6 kernel working as 2.4?
Just one cpu for interrupts, other three cpu for normal work.

-- 
Quan Sun
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-05-10 05:49    [from the cache]
©2003-2008