lkml.org 
[lkml]   [2007]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Subject2.6.21-rc7-mm2 breaks 'lvm vgscan'.
    From
    Date
    On Wed, 25 Apr 2007 22:57:16 PDT, Andrew Morton said:
    > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.21-rc7/2.6.21-rc7-mm2/

    This addition in -rc7-mm1 breaks my laptop (Dell Latitude D820, x86_64 kernel)

    gregkh-driver-sysfs-fix-i_ino-handling-in-sysfs.patch

    The initrd on my system does an 'lvm vgscan' to get the root filesystem
    accessible. Under -rc5-mm2, this works fine. For -rc7-mm[12], it finds the disk:

    ata_piix 0000:00:1f.2: version 2.11
    ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
    ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: SATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001bfa0 irq 14
    ata2: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001bfa8 irq 15
    ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
    ata1.00: ATA-7: ST980825AS, 8.04, max UDMA/133
    ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 0/32)
    ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
    ata1.00: configured for UDMA/133
    ata2.00: ATAPI, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA ST980825AS 8.04 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2
    sd 0:0:0:0: [sda] Attached SCSI disk

    sda1 is an ext3 /boot, sda2 is an LVM space covering the rest of the disk, so
    we're doing well so far.

    The 'lvm vgscan' fails and says 'No volume groups found, with no useful kernel
    messages issued. Then we get the infamous "Kernel panic - not syncing:
    Attempted to kill init!" when it can't find the root file system and we fall
    off the end of the initrd.

    Any ideas?
    [unhandled content-type:application/pgp-signature]
    \
     
     \ /
      Last update: 2007-04-27 04:33    [W:0.023 / U:0.504 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site