lkml.org 
[lkml]   [2007]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] serial 8250: move push calls out of lock
On Thu, Apr 26, 2007 at 03:51:03PM -0500, Corey Minyard wrote:
> This time to lkml...

NAK. Did you read your own patch, let alone try to build it? It's
also utterly broken. See comments below.

> Subject: serial 8250: move push calls out of lock
>
> Due to previous changes in the 8250 driver, the call to
> tty_flip_buffer_push is now done with interrupts disabled. Not really
> a huge deal, but sub-optimal.
>
> This patch moves all of the "wake up, you have data" operations out of
> the lock. This will run a little faster by avoiding dropping and
> retaking the lock in the receive handler and will make the polled
> serial code (which I am working on) easier to do.
>
> >From Alan Cox:
>
> This is actually a very good idea as it means you don't have to deal with
> the problems with low_latency causing re-entry into the driver under the
> lock so its conceptually much easier to follow the locking
>
>
> Signed-off-by: Corey Minyard <minyard@acm.org>
> Acked-by: Alan Cox <alan@redhat.com>
>
> drivers/serial/8250.c | 53 +++++++++++++++++++++++++++++++-------------------
> 1 file changed, 33 insertions(+), 20 deletions(-)
>
> Index: linux-2.6.21/drivers/serial/8250.c
> ===================================================================
> --- linux-2.6.21.orig/drivers/serial/8250.c
> +++ linux-2.6.21/drivers/serial/8250.c
> @@ -1146,7 +1146,7 @@ static void serial8250_stop_tx(struct ua
> }
> }
>
> -static void transmit_chars(struct uart_8250_port *up);
> +static int transmit_chars(struct uart_8250_port *up);
>
> static void serial8250_start_tx(struct uart_port *port)
> {
> @@ -1195,10 +1195,8 @@ static void serial8250_enable_ms(struct
> serial_out(up, UART_IER, up->ier);
> }
>
> -static void
> -receive_chars(struct uart_8250_port *up, unsigned int *status)
> +static int receive_chars(struct uart_8250_port *up, unsigned int *status)
> {
> - struct tty_struct *tty = up->port.info->tty;
> unsigned char ch, lsr = *status;
> int max_count = 256;
> char flag;
> @@ -1262,30 +1260,30 @@ receive_chars(struct uart_8250_port *up,
> ignore_char:
> lsr = serial_inp(up, UART_LSR);
> } while ((lsr & UART_LSR_DR) && (max_count-- > 0));
> - spin_unlock(&up->port.lock);
> - tty_flip_buffer_push(tty);
> - spin_lock(&up->port.lock);
> *status = lsr;
> +
> + return 1;
> }
>
> -static void transmit_chars(struct uart_8250_port *up)
> +static int transmit_chars(struct uart_8250_port *up)
> {
> struct circ_buf *xmit = &up->port.info->xmit;
> int count;
> + int xmit_ready = 0;
>
> if (up->port.x_char) {
> serial_outp(up, UART_TX, up->port.x_char);
> up->port.icount.tx++;
> up->port.x_char = 0;
> - return;
> + return 0;
> }
> if (uart_tx_stopped(&up->port)) {
> serial8250_stop_tx(&up->port);
> - return;
> + return 0;
> }
> if (uart_circ_empty(xmit)) {
> __stop_tx(up);
> - return;
> + return 0;
> }
>
> count = up->tx_loadsz;
> @@ -1298,18 +1296,22 @@ static void transmit_chars(struct uart_8
> } while (--count > 0);
>
> if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
> - uart_write_wakeup(&up->port);
> + xmit_ready = 1;
>
> DEBUG_INTR("THRE...");
>
> if (uart_circ_empty(xmit))
> __stop_tx(up);
> +
> + return xmit_ready;
> }
>
> -static unsigned int check_modem_status(struct uart_8250_port *up)
> +static int check_modem_status(struct uart_8250_port *up, unsigned int *rstatus)
> {
> unsigned int status = serial_in(up, UART_MSR);
>
> + if (rstatus)
> + *rstatus = status;
> if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
> up->port.info != NULL) {
> if (status & UART_MSR_TERI)
> @@ -1320,11 +1322,10 @@ static unsigned int check_modem_status(s
> uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
> if (status & UART_MSR_DCTS)
> uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
> -
> - wake_up_interruptible(&up->port.info->delta_msr_wait);
> + return 1;
> }
>
> - return status;
> + return 0;
> }
>
> /*
> @@ -1334,6 +1335,9 @@ static inline void
> serial8250_handle_port(struct uart_8250_port *up)
> {
> unsigned int status;
> + int xmit_ready = 0;
> + int recv_ready = 0;
> + int msr_ready = 0;
> unsigned long flags;
>
> spin_lock_irqsave(&up->port.lock, flags);
> @@ -1343,12 +1347,21 @@ serial8250_handle_port(struct uart_8250_
> DEBUG_INTR("status = %x...", status);
>
> if (status & UART_LSR_DR)
> - receive_chars(up, &status);
> - check_modem_status(up);
> + recv_ready = receive_chars(up, &status);
> + msr_ready = check_modem_status(up, NULL);
> if (status & UART_LSR_THRE)
> - transmit_chars(up);
> + xmit_ready = transmit_chars(up);
>
> spin_unlock_irqrestore(&up->port.lock, flags);
> +
> + if (recv_ready)
> + tty_flip_buffer_push(up->port.info->tty);
> +
> + if (msr_ready)
> + wake_up_interruptible(&up->port.info->delta_msr_wait);

wake_up_interruptible doesn't take any locks.

> +
> + if (xmit_ready)
> + uart_write_wakeup(&up->port);

NAK. uart_write_wakeup() is specifically designed not to take any locks.
It's also called from the depths of uart_handle_cts_change(). So this
buys us just additional unnecessary complexity.

> }
>
> /*
> @@ -1551,7 +1564,7 @@ static unsigned int serial8250_get_mctrl
> unsigned int status;
> unsigned int ret;
>
> - status = check_modem_status(up);
> + check_modem_status(up, &status);
>
> ret = 0;
> if (status & UART_MSR_DCD)

Use of an uninitialised variable. The reason we use check_modem_status
to return the current status here is because reading the MSR _clears_
interrupts. So, repeatedly calling get_mctrl via an ioctl is a great
way to introduce a hardware race condition if you just read the MSR and
never act on it.

--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of:
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-04-26 23:01    [W:0.067 / U:1.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site