lkml.org 
[lkml]   [2007]   [Apr]   [25]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
    /
    DateWed, 25 Apr 2007 21:52:00 +0300
    From"Alon Bar-Lev" <>
    SubjectRe: suspend2 merge (was Re: [Suspend2-devel] Re: CFS and suspend2: hang in atomic copy)
    On 4/25/07, Pavel Machek <pavel@ucw.cz> wrote:
    > Ok ok ok, suspend-to-disk has some other uses, too.
    >
    > But ... you are really using suspend-to-disk as a workaround for "my
    > desktop takes too much power when idle". Imagine pressing "lock
    > screensaver" combination, and your machine going to low power mode
    > (3W?), immediately. (Quiet, too; you can't generate much noise for
    > 3W). In the morning, you'd just press any key, machine would power up,
    > immediately... ok, you'd have to ifconfig eth0 down, so that spurious
    > packets on the local net would wake your machine, with all its fans
    > etc.
    >                                                                 Pavel
    
    You are assuming that:
    1. You have battery backup, or external power never fail.
    2. You don't disconnect the filesystem from the device.
    3. The security level of turned on device equals to a turned off one.
    4. You turn on the same device that turned off.
    5. You do not wish to boot another OS on this machine.
    
    None of the above are always true... but why assume?
    Just make this work... If Nigel wish to maintain this please let him,
    you can be in charge of the s2ram.
    
    Best Regards,
    Alon Bar-Lev.
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at  http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at  http://www.tux.org/lkml/
    
    
    \
     
     \ /
      Last update: 2007-04-25 20:55    [from the cache]
    ©2003-2008