lkml.org 
[lkml]   [2007]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    Subject2.6.21-rc7: HPET enabled freeze my machine at boot
    Hi,

    If i enable "High Resolution Timer Support", my machine stops here at boot:

    Clocksource tsc unstable (delta = -297340790165 ns)
    Time: hpet clocksource has been installed.

    If i disable HPET, it boots fine.

    I attach my .config (with hpet enable) and my bootable dmesg.

    Thanks.

    --
    Guilherme M. Schroeder
    Network Administrator
    Central de Vendas Informatica LTDA
    Tel.: (11) 3665-2000 Ramal: 2008
    http://www.centralinf.com.br
    Linux version 2.6.21-rc7-g895e1fc7-dirty (root@dub) (gcc version 4.1.2) #1 SMP Thu Apr 19 17:19:15 BRT 2007
    BIOS-provided physical RAM map:
    sanitize start
    sanitize end
    copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
    copy_e820_map() type is E820_RAM
    copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
    copy_e820_map() start: 0000000000100000 size: 000000003dd5c800 end: 000000003de5c800 type: 1
    copy_e820_map() type is E820_RAM
    copy_e820_map() start: 000000003de5c800 size: 0000000000002000 end: 000000003de5e800 type: 4
    copy_e820_map() start: 000000003de5e800 size: 0000000000002000 end: 000000003de60800 type: 3
    copy_e820_map() start: 000000003de60800 size: 000000000019f800 end: 000000003e000000 type: 2
    copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
    copy_e820_map() start: 00000000fec00000 size: 0000000000100400 end: 00000000fed00400 type: 2
    copy_e820_map() start: 00000000fee00000 size: 0000000000100000 end: 00000000fef00000 type: 2
    copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003de5c800 (usable)
    BIOS-e820: 000000003de5c800 - 000000003de5e800 (ACPI NVS)
    BIOS-e820: 000000003de5e800 - 000000003de60800 (ACPI data)
    BIOS-e820: 000000003de60800 - 000000003e000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    94MB HIGHMEM available.
    896MB LOWMEM available.
    Entering add_active_range(0, 0, 253532) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 229376
    HighMem 229376 -> 253532
    early_node_map[1] active PFN ranges
    0: 0 -> 253532
    On node 0 totalpages: 253532
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1760 pages used for memmap
    Normal zone: 223520 pages, LIFO batch:31
    HighMem zone: 188 pages used for memmap
    HighMem zone: 23968 pages, LIFO batch:3
    DMI 2.3 present.
    ACPI: RSDP 000FEBF0, 0024 (r2 DELL )
    ACPI: XSDT 000FD07A, 005C (r1 DELL B8K 14 ASL 61)
    ACPI: FACP 000FD192, 00F4 (r3 DELL B8K 14 ASL 61)
    ACPI: DSDT FFFCA3A8, 38C6 (r1 DELL dt_ex 1000 INTL 20050624)
    ACPI: FACS 3DE5C800, 0040
    ACPI: SSDT FFFCDD8F, 00AC (r1 DELL st_ex 1000 INTL 20050624)
    ACPI: APIC 000FD286, 0092 (r1 DELL B8K 14 ASL 61)
    ACPI: BOOT 000FD318, 0028 (r1 DELL B8K 14 ASL 61)
    ACPI: MCFG 000FD340, 003E (r1 DELL B8K 14 ASL 61)
    ACPI: HPET 000FD37E, 0038 (r1 DELL B8K 14 ASL 61)
    ACPI: SLIC 000FD3B6, 0176 (r1 DELL B8K 14 ASL 61)
    ATI board detected. Disabling timer routing over 8254.
    ACPI: PM-Timer IO Port: 0x4008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 15:6 APIC version 20
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Processor #1 15:6 APIC version 20
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
    ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
    ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
    ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
    ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
    ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 40000000 (gap: 3e000000:a2000000)
    Built 1 zonelists. Total pages: 251552
    Kernel command line: BOOT_IMAGE=Linux ro root=802
    mapped APIC to ffffd000 (fee00000)
    mapped IOAPIC to ffffc000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Detected 3000.342 MHz processor.
    Console: colour dummy device 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 1002000k/1014128k available (1712k kernel code, 11664k reserved, 736k data, 172k init, 96624k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc036b000 - 0xc0396000 ( 172 kB)
    .data : 0xc02ac2cf - 0xc0364614 ( 736 kB)
    .text : 0xc0100000 - 0xc02ac2cf (1712 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 6003.73 BogoMIPS (lpj=3001866)
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001
    monitor/mwait feature present.
    using mwait in idle threads.
    CPU: Trace cache: 12K uops, L1 D cache: 16K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000e49d 00000000 00000001
    Checking 'hlt' instruction... OK.
    Freeing SMP alternatives: 11k freed
    ACPI: Core revision 20070126
    CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 05
    Booting processor 1/1 eip 2000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 5999.47 BogoMIPS (lpj=2999735)
    CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001
    monitor/mwait feature present.
    CPU: Trace cache: 12K uops, L1 D cache: 16K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000e49d 00000000 00000001
    CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 05
    Total of 2 processors activated (12003.20 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    migration_cost=2819
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: Using MMCONFIG
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    0000:00:14.1: trying to change BAR0 from 01F0 to 01F0
    0000:00:14.1: trying to change BAR1 from 03F4 to 03F4
    0000:00:14.1: trying to change BAR2 from 0170 to 0170
    0000:00:14.1: trying to change BAR3 from 0374 to 0374
    Boot video device is 0000:01:05.0
    PCI: Transparent bridge - 0000:00:14.4
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI7._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *4 5 6 7 9 10 11 12 15), disabled.
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 9 10 11 12 15), disabled.
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 9 10 11 12 15), disabled.
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 9 10 11 12 15), disabled.
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 9 10 11 12 15), disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 15), disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 9 10 11 12 15), disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 9 10 11 12 15), disabled.
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 10 devices
    SCSI subsystem initialized
    libata version 2.20 loaded.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    PCI: Cannot allocate resource region 1 of device 0000:00:14.0
    pnp: 00:01: ioport range 0x228-0x22f has been reserved
    pnp: 00:01: ioport range 0x40b-0x40b has been reserved
    pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved
    pnp: 00:01: ioport range 0xb10-0xb1f has been reserved
    pnp: 00:08: iomem range 0x0-0x9ffff could not be reserved
    pnp: 00:08: iomem range 0x100000-0xffffff could not be reserved
    pnp: 00:08: iomem range 0x1000000-0x3de5c7ff could not be reserved
    pnp: 00:08: iomem range 0xf0000-0xfffff could not be reserved
    pnp: 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
    Time: tsc clocksource has been installed.
    PCI: Bridge: 0000:00:01.0
    IO window: e000-efff
    MEM window: dfd00000-dfefffff
    PREFETCH window: d0000000-d7ffffff
    PCI: Bridge: 0000:00:14.4
    IO window: disabled.
    MEM window: dfc00000-dfcfffff
    PREFETCH window: disabled.
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    Simple Boot Flag at 0x7a set to 0x1
    highmem bounce pool size: 64 pages
    io scheduler noop registered
    io scheduler cfq registered (default)
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 0
    0000:00:13.0 OHCI: BIOS handoff failed (BIOS bug ?) 000001b4
    0000:00:13.1 OHCI: BIOS handoff failed (BIOS bug ?) 000001b4
    0000:00:13.2 OHCI: BIOS handoff failed (BIOS bug ?) 000001b4
    0000:00:13.3 OHCI: BIOS handoff failed (BIOS bug ?) 000001b4
    0000:00:13.4 OHCI: BIOS handoff failed (BIOS bug ?) 000001b4
    vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 16384k
    vesafb: mode is 1024x768x8, linelength=1024, pages=20
    vesafb: protected mode interface info at c000:4ff1
    vesafb: pmi: set display start = c00c505f, set palette = c00c5099
    vesafb: pmi: ports = ec10 ec16 ec54 ec38 ec3c ec5c ec00 ec04 ecb0 ecb2 ecb4
    vesafb: scrolling: redraw
    vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    input: Power Button (FF) as /class/input/input0
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /class/input/input1
    ACPI: Power Button (CM) [VBTN]
    Real Time Clock Driver v1.12ac
    Linux agpgart interface v0.102 (c) Dave Jones
    b44.c:v1.01 (Jun 16, 2006)
    ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 16
    eth0: Broadcom 4400 10/100BaseT Ethernet 00:15:c5:35:eb:78
    ahci 0000:00:12.0: version 2.1
    ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 17
    ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part
    ata1: SATA max UDMA/133 cmd 0xf880ad00 ctl 0x00000000 bmdma 0x00000000 irq 17
    ata2: SATA max UDMA/133 cmd 0xf880ad80 ctl 0x00000000 bmdma 0x00000000 irq 17
    ata3: SATA max UDMA/133 cmd 0xf880ae00 ctl 0x00000000 bmdma 0x00000000 irq 17
    ata4: SATA max UDMA/133 cmd 0xf880ae80 ctl 0x00000000 bmdma 0x00000000 irq 17
    scsi0 : ahci
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata1.00: ATA-7: SAMSUNG HD080HJ/P, ZH100-34, max UDMA7
    ata1.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/133
    scsi1 : ahci
    ata2: SATA link down (SStatus 0 SControl 300)
    scsi2 : ahci
    ata3: SATA link down (SStatus 0 SControl 300)
    scsi3 : ahci
    ata4: SATA link down (SStatus 0 SControl 300)
    scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD080HJ/ ZH10 PQ: 0 ANSI: 5
    SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3
    sd 0:0:0:0: Attached scsi disk sda
    ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18
    ata5: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
    ata6: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
    scsi4 : pata_atiixp
    ata5.00: ATAPI, max UDMA/33
    ata5.00: configured for UDMA/33
    scsi5 : pata_atiixp
    scsi 4:0:0:0: CD-ROM TSSTcorp CDRWDVD TS-H492C DE02 PQ: 0 ANSI: 5
    sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 4:0:0:0: Attached scsi CD-ROM sr0
    ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
    ehci_hcd 0000:00:13.5: EHCI Host Controller
    ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:13.5: debug port 1
    ehci_hcd 0000:00:13.5: irq 19, io mem 0xdfff6900
    ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 10 ports detected
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 18
    ohci_hcd 0000:00:13.0: OHCI Host Controller
    ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:13.0: irq 18, io mem 0xdfff7000
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 20
    ohci_hcd 0000:00:13.1: OHCI Host Controller
    ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:13.1: irq 20, io mem 0xdfff8000
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 21
    ohci_hcd 0000:00:13.2: OHCI Host Controller
    ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
    ohci_hcd 0000:00:13.2: irq 21, io mem 0xdfff9000
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 20
    ohci_hcd 0000:00:13.3: OHCI Host Controller
    ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
    ohci_hcd 0000:00:13.3: irq 20, io mem 0xdfffa000
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    usb 3-1: new low speed USB device using ohci_hcd and address 2
    ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 21
    ohci_hcd 0000:00:13.4: OHCI Host Controller
    ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
    ohci_hcd 0000:00:13.4: irq 21, io mem 0xdfffb000
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    usb 3-1: configuration #1 chosen from 1 choice
    usb 3-2: new low speed USB device using ohci_hcd and address 3
    usb 3-2: configuration #1 chosen from 1 choice
    usbcore: registered new interface driver cdc_acm
    drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    input: Logitech Optical USB Mouse as /class/input/input2
    input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.1-1
    input: Dell Dell USB Keyboard as /class/input/input3
    input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:13.1-2
    usbcore: registered new interface driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    PNP: No PS/2 controller found. Probing ports directly.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC).
    ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 18
    ALSA device list:
    #0: HDA ATI SB at 0xdfffc000 irq 18
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Starting balanced_irq
    Using IPI Shortcut mode
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    VFS: Mounted root (ext3 filesystem) readonly.
    Freeing unused kernel memory: 172k freed
    Adding 506008k swap on /dev/sda1. Priority:-1 extents:1 across:506008k
    EXT3 FS on sda2, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    b44: eth0: Link is up at 100 Mbps, full duplex.
    b44: eth0: Flow control is off for TX and off for RX.
    mtrr: type mismatch for d0600000,100000 old: write-back new: write-combining
    mtrr: type mismatch for d0400000,200000 old: write-back new: write-combining
    mtrr: type mismatch for d0000000,400000 old: write-back new: write-combining
    hda-intel: Invalid position buffer, using LPIB read method instead.
    #
    # Automatically generated make config: don't edit
    # Linux kernel version: 2.6.21-rc7
    # Thu Apr 19 17:33:17 2007
    #
    CONFIG_X86_32=y
    CONFIG_GENERIC_TIME=y
    CONFIG_CLOCKSOURCE_WATCHDOG=y
    CONFIG_GENERIC_CLOCKEVENTS=y
    CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
    CONFIG_LOCKDEP_SUPPORT=y
    CONFIG_STACKTRACE_SUPPORT=y
    CONFIG_SEMAPHORE_SLEEPERS=y
    CONFIG_X86=y
    CONFIG_MMU=y
    CONFIG_ZONE_DMA=y
    CONFIG_GENERIC_ISA_DMA=y
    CONFIG_GENERIC_IOMAP=y
    CONFIG_GENERIC_BUG=y
    CONFIG_GENERIC_HWEIGHT=y
    CONFIG_ARCH_MAY_HAVE_PC_FDC=y
    CONFIG_DMI=y
    CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

    #
    # Code maturity level options
    #
    CONFIG_EXPERIMENTAL=y
    CONFIG_LOCK_KERNEL=y
    CONFIG_INIT_ENV_ARG_LIMIT=32

    #
    # General setup
    #
    CONFIG_LOCALVERSION=""
    CONFIG_LOCALVERSION_AUTO=y
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    # CONFIG_IPC_NS is not set
    CONFIG_SYSVIPC_SYSCTL=y
    CONFIG_POSIX_MQUEUE=y
    # CONFIG_BSD_PROCESS_ACCT is not set
    # CONFIG_TASKSTATS is not set
    # CONFIG_UTS_NS is not set
    # CONFIG_AUDIT is not set
    # CONFIG_IKCONFIG is not set
    # CONFIG_CPUSETS is not set
    # CONFIG_SYSFS_DEPRECATED is not set
    # CONFIG_RELAY is not set
    # CONFIG_BLK_DEV_INITRD is not set
    CONFIG_CC_OPTIMIZE_FOR_SIZE=y
    CONFIG_SYSCTL=y
    # CONFIG_EMBEDDED is not set
    CONFIG_UID16=y
    CONFIG_SYSCTL_SYSCALL=y
    CONFIG_KALLSYMS=y
    # CONFIG_KALLSYMS_EXTRA_PASS is not set
    CONFIG_HOTPLUG=y
    CONFIG_PRINTK=y
    CONFIG_BUG=y
    CONFIG_ELF_CORE=y
    CONFIG_BASE_FULL=y
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    CONFIG_SHMEM=y
    CONFIG_SLAB=y
    CONFIG_VM_EVENT_COUNTERS=y
    CONFIG_RT_MUTEXES=y
    # CONFIG_TINY_SHMEM is not set
    CONFIG_BASE_SMALL=0
    # CONFIG_SLOB is not set

    #
    # Loadable module support
    #
    CONFIG_MODULES=y
    CONFIG_MODULE_UNLOAD=y
    CONFIG_MODULE_FORCE_UNLOAD=y
    # CONFIG_MODVERSIONS is not set
    # CONFIG_MODULE_SRCVERSION_ALL is not set
    CONFIG_KMOD=y
    CONFIG_STOP_MACHINE=y

    #
    # Block layer
    #
    CONFIG_BLOCK=y
    # CONFIG_LBD is not set
    # CONFIG_BLK_DEV_IO_TRACE is not set
    # CONFIG_LSF is not set

    #
    # IO Schedulers
    #
    CONFIG_IOSCHED_NOOP=y
    # CONFIG_IOSCHED_AS is not set
    # CONFIG_IOSCHED_DEADLINE is not set
    CONFIG_IOSCHED_CFQ=y
    # CONFIG_DEFAULT_AS is not set
    # CONFIG_DEFAULT_DEADLINE is not set
    CONFIG_DEFAULT_CFQ=y
    # CONFIG_DEFAULT_NOOP is not set
    CONFIG_DEFAULT_IOSCHED="cfq"

    #
    # Processor type and features
    #
    CONFIG_TICK_ONESHOT=y
    CONFIG_NO_HZ=y
    CONFIG_HIGH_RES_TIMERS=y
    CONFIG_SMP=y
    CONFIG_X86_PC=y
    # CONFIG_X86_ELAN is not set
    # CONFIG_X86_VOYAGER is not set
    # CONFIG_X86_NUMAQ is not set
    # CONFIG_X86_SUMMIT is not set
    # CONFIG_X86_BIGSMP is not set
    # CONFIG_X86_VISWS is not set
    # CONFIG_X86_GENERICARCH is not set
    # CONFIG_X86_ES7000 is not set
    # CONFIG_PARAVIRT is not set
    # CONFIG_M386 is not set
    # CONFIG_M486 is not set
    # CONFIG_M586 is not set
    # CONFIG_M586TSC is not set
    # CONFIG_M586MMX is not set
    # CONFIG_M686 is not set
    # CONFIG_MPENTIUMII is not set
    # CONFIG_MPENTIUMIII is not set
    # CONFIG_MPENTIUMM is not set
    # CONFIG_MCORE2 is not set
    CONFIG_MPENTIUM4=y
    # CONFIG_MK6 is not set
    # CONFIG_MK7 is not set
    # CONFIG_MK8 is not set
    # CONFIG_MCRUSOE is not set
    # CONFIG_MEFFICEON is not set
    # CONFIG_MWINCHIPC6 is not set
    # CONFIG_MWINCHIP2 is not set
    # CONFIG_MWINCHIP3D is not set
    # CONFIG_MGEODEGX1 is not set
    # CONFIG_MGEODE_LX is not set
    # CONFIG_MCYRIXIII is not set
    # CONFIG_MVIAC3_2 is not set
    # CONFIG_X86_GENERIC is not set
    CONFIG_X86_CMPXCHG=y
    CONFIG_X86_L1_CACHE_SHIFT=7
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    # CONFIG_ARCH_HAS_ILOG2_U32 is not set
    # CONFIG_ARCH_HAS_ILOG2_U64 is not set
    CONFIG_GENERIC_CALIBRATE_DELAY=y
    CONFIG_X86_WP_WORKS_OK=y
    CONFIG_X86_INVLPG=y
    CONFIG_X86_BSWAP=y
    CONFIG_X86_POPAD_OK=y
    CONFIG_X86_CMPXCHG64=y
    CONFIG_X86_GOOD_APIC=y
    CONFIG_X86_INTEL_USERCOPY=y
    CONFIG_X86_USE_PPRO_CHECKSUM=y
    CONFIG_X86_TSC=y
    CONFIG_HPET_TIMER=y
    CONFIG_HPET_EMULATE_RTC=y
    CONFIG_NR_CPUS=2
    # CONFIG_SCHED_SMT is not set
    CONFIG_SCHED_MC=y
    # CONFIG_PREEMPT_NONE is not set
    CONFIG_PREEMPT_VOLUNTARY=y
    # CONFIG_PREEMPT is not set
    CONFIG_PREEMPT_BKL=y
    CONFIG_X86_LOCAL_APIC=y
    CONFIG_X86_IO_APIC=y
    # CONFIG_X86_MCE is not set
    CONFIG_VM86=y
    # CONFIG_TOSHIBA is not set
    # CONFIG_I8K is not set
    # CONFIG_X86_REBOOTFIXUPS is not set
    # CONFIG_MICROCODE is not set
    # CONFIG_X86_MSR is not set
    # CONFIG_X86_CPUID is not set

    #
    # Firmware Drivers
    #
    # CONFIG_EDD is not set
    # CONFIG_DELL_RBU is not set
    # CONFIG_DCDBAS is not set
    # CONFIG_NOHIGHMEM is not set
    CONFIG_HIGHMEM4G=y
    # CONFIG_HIGHMEM64G is not set
    CONFIG_PAGE_OFFSET=0xC0000000
    CONFIG_HIGHMEM=y
    CONFIG_ARCH_FLATMEM_ENABLE=y
    CONFIG_ARCH_SPARSEMEM_ENABLE=y
    CONFIG_ARCH_SELECT_MEMORY_MODEL=y
    CONFIG_ARCH_POPULATES_NODE_MAP=y
    CONFIG_SELECT_MEMORY_MODEL=y
    CONFIG_FLATMEM_MANUAL=y
    # CONFIG_DISCONTIGMEM_MANUAL is not set
    # CONFIG_SPARSEMEM_MANUAL is not set
    CONFIG_FLATMEM=y
    CONFIG_FLAT_NODE_MEM_MAP=y
    CONFIG_SPARSEMEM_STATIC=y
    CONFIG_SPLIT_PTLOCK_CPUS=4
    CONFIG_RESOURCES_64BIT=y
    CONFIG_ZONE_DMA_FLAG=1
    # CONFIG_HIGHPTE is not set
    # CONFIG_MATH_EMULATION is not set
    CONFIG_MTRR=y
    # CONFIG_EFI is not set
    CONFIG_IRQBALANCE=y
    CONFIG_SECCOMP=y
    # CONFIG_HZ_100 is not set
    # CONFIG_HZ_250 is not set
    # CONFIG_HZ_300 is not set
    CONFIG_HZ_1000=y
    CONFIG_HZ=1000
    # CONFIG_KEXEC is not set
    # CONFIG_CRASH_DUMP is not set
    CONFIG_PHYSICAL_START=0x100000
    # CONFIG_RELOCATABLE is not set
    CONFIG_PHYSICAL_ALIGN=0x100000
    # CONFIG_HOTPLUG_CPU is not set
    # CONFIG_COMPAT_VDSO is not set
    CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

    #
    # Power management options (ACPI, APM)
    #
    CONFIG_PM=y
    # CONFIG_PM_LEGACY is not set
    # CONFIG_PM_DEBUG is not set
    # CONFIG_PM_SYSFS_DEPRECATED is not set

    #
    # ACPI (Advanced Configuration and Power Interface) Support
    #
    CONFIG_ACPI=y
    # CONFIG_ACPI_PROCFS is not set
    # CONFIG_ACPI_AC is not set
    # CONFIG_ACPI_BATTERY is not set
    CONFIG_ACPI_BUTTON=y
    # CONFIG_ACPI_FAN is not set
    # CONFIG_ACPI_DOCK is not set
    # CONFIG_ACPI_PROCESSOR is not set
    # CONFIG_ACPI_ASUS is not set
    # CONFIG_ACPI_IBM is not set
    # CONFIG_ACPI_TOSHIBA is not set
    CONFIG_ACPI_BLACKLIST_YEAR=2001
    # CONFIG_ACPI_DEBUG is not set
    CONFIG_ACPI_EC=y
    CONFIG_ACPI_POWER=y
    CONFIG_ACPI_SYSTEM=y
    CONFIG_X86_PM_TIMER=y
    # CONFIG_ACPI_CONTAINER is not set

    #
    # APM (Advanced Power Management) BIOS Support
    #
    # CONFIG_APM is not set

    #
    # CPU Frequency scaling
    #
    # CONFIG_CPU_FREQ is not set

    #
    # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
    #
    CONFIG_PCI=y
    # CONFIG_PCI_GOBIOS is not set
    # CONFIG_PCI_GOMMCONFIG is not set
    # CONFIG_PCI_GODIRECT is not set
    CONFIG_PCI_GOANY=y
    CONFIG_PCI_BIOS=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_MMCONFIG=y
    # CONFIG_PCIEPORTBUS is not set
    # CONFIG_PCI_MSI is not set
    # CONFIG_HT_IRQ is not set
    CONFIG_ISA_DMA_API=y
    # CONFIG_ISA is not set
    # CONFIG_MCA is not set
    # CONFIG_SCx200 is not set

    #
    # PCCARD (PCMCIA/CardBus) support
    #
    # CONFIG_PCCARD is not set

    #
    # PCI Hotplug Support
    #
    # CONFIG_HOTPLUG_PCI is not set

    #
    # Executable file formats
    #
    CONFIG_BINFMT_ELF=y
    # CONFIG_BINFMT_AOUT is not set
    # CONFIG_BINFMT_MISC is not set

    #
    # Networking
    #
    CONFIG_NET=y

    #
    # Networking options
    #
    # CONFIG_NETDEBUG is not set
    CONFIG_PACKET=y
    CONFIG_PACKET_MMAP=y
    CONFIG_UNIX=y
    # CONFIG_NET_KEY is not set
    CONFIG_INET=y
    # CONFIG_IP_MULTICAST is not set
    # CONFIG_IP_ADVANCED_ROUTER is not set
    CONFIG_IP_FIB_HASH=y
    # CONFIG_IP_PNP is not set
    # CONFIG_NET_IPIP is not set
    # CONFIG_NET_IPGRE is not set
    # CONFIG_ARPD is not set
    # CONFIG_SYN_COOKIES is not set
    # CONFIG_INET_AH is not set
    # CONFIG_INET_ESP is not set
    # CONFIG_INET_IPCOMP is not set
    # CONFIG_INET_XFRM_TUNNEL is not set
    # CONFIG_INET_TUNNEL is not set
    # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
    # CONFIG_INET_XFRM_MODE_TUNNEL is not set
    # CONFIG_INET_XFRM_MODE_BEET is not set
    # CONFIG_INET_DIAG is not set
    # CONFIG_TCP_CONG_ADVANCED is not set
    CONFIG_TCP_CONG_CUBIC=y
    CONFIG_DEFAULT_TCP_CONG="cubic"
    # CONFIG_TCP_MD5SIG is not set
    # CONFIG_IPV6 is not set
    # CONFIG_INET6_XFRM_TUNNEL is not set
    # CONFIG_INET6_TUNNEL is not set
    # CONFIG_NETWORK_SECMARK is not set
    # CONFIG_NETFILTER is not set

    #
    # DCCP Configuration (EXPERIMENTAL)
    #
    # CONFIG_IP_DCCP is not set

    #
    # SCTP Configuration (EXPERIMENTAL)
    #
    # CONFIG_IP_SCTP is not set

    #
    # TIPC Configuration (EXPERIMENTAL)
    #
    # CONFIG_TIPC is not set
    # CONFIG_ATM is not set
    # CONFIG_BRIDGE is not set
    # CONFIG_VLAN_8021Q is not set
    # CONFIG_DECNET is not set
    # CONFIG_LLC2 is not set
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_ECONET is not set
    # CONFIG_WAN_ROUTER is not set

    #
    # QoS and/or fair queueing
    #
    # CONFIG_NET_SCHED is not set

    #
    # Network testing
    #
    # CONFIG_NET_PKTGEN is not set
    # CONFIG_HAMRADIO is not set
    # CONFIG_IRDA is not set
    # CONFIG_BT is not set
    # CONFIG_IEEE80211 is not set

    #
    # Device Drivers
    #

    #
    # Generic Driver Options
    #
    CONFIG_STANDALONE=y
    CONFIG_PREVENT_FIRMWARE_BUILD=y
    # CONFIG_FW_LOADER is not set
    # CONFIG_SYS_HYPERVISOR is not set

    #
    # Connector - unified userspace <-> kernelspace linker
    #
    # CONFIG_CONNECTOR is not set

    #
    # Memory Technology Devices (MTD)
    #
    # CONFIG_MTD is not set

    #
    # Parallel port support
    #
    # CONFIG_PARPORT is not set

    #
    # Plug and Play support
    #
    CONFIG_PNP=y
    # CONFIG_PNP_DEBUG is not set

    #
    # Protocols
    #
    CONFIG_PNPACPI=y

    #
    # Block devices
    #
    # CONFIG_BLK_DEV_FD is not set
    # CONFIG_BLK_CPQ_DA is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    # CONFIG_BLK_DEV_COW_COMMON is not set
    CONFIG_BLK_DEV_LOOP=m
    # CONFIG_BLK_DEV_CRYPTOLOOP is not set
    # CONFIG_BLK_DEV_NBD is not set
    # CONFIG_BLK_DEV_SX8 is not set
    # CONFIG_BLK_DEV_UB is not set
    # CONFIG_BLK_DEV_RAM is not set
    # CONFIG_CDROM_PKTCDVD is not set
    # CONFIG_ATA_OVER_ETH is not set

    #
    # Misc devices
    #
    # CONFIG_IBM_ASM is not set
    # CONFIG_SGI_IOC4 is not set
    # CONFIG_TIFM_CORE is not set
    # CONFIG_SONY_LAPTOP is not set

    #
    # ATA/ATAPI/MFM/RLL support
    #
    # CONFIG_IDE is not set

    #
    # SCSI device support
    #
    # CONFIG_RAID_ATTRS is not set
    CONFIG_SCSI=y
    # CONFIG_SCSI_TGT is not set
    # CONFIG_SCSI_NETLINK is not set
    # CONFIG_SCSI_PROC_FS is not set

    #
    # SCSI support type (disk, tape, CD-ROM)
    #
    CONFIG_BLK_DEV_SD=y
    # CONFIG_CHR_DEV_ST is not set
    # CONFIG_CHR_DEV_OSST is not set
    CONFIG_BLK_DEV_SR=y
    # CONFIG_BLK_DEV_SR_VENDOR is not set
    # CONFIG_CHR_DEV_SG is not set
    # CONFIG_CHR_DEV_SCH is not set

    #
    # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    #
    # CONFIG_SCSI_MULTI_LUN is not set
    # CONFIG_SCSI_CONSTANTS is not set
    # CONFIG_SCSI_LOGGING is not set
    # CONFIG_SCSI_SCAN_ASYNC is not set

    #
    # SCSI Transports
    #
    CONFIG_SCSI_SPI_ATTRS=y
    # CONFIG_SCSI_FC_ATTRS is not set
    # CONFIG_SCSI_ISCSI_ATTRS is not set
    # CONFIG_SCSI_SAS_ATTRS is not set
    # CONFIG_SCSI_SAS_LIBSAS is not set

    #
    # SCSI low-level drivers
    #
    # CONFIG_ISCSI_TCP is not set
    # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
    # CONFIG_SCSI_3W_9XXX is not set
    # CONFIG_SCSI_ACARD is not set
    # CONFIG_SCSI_AACRAID is not set
    # CONFIG_SCSI_AIC7XXX is not set
    # CONFIG_SCSI_AIC7XXX_OLD is not set
    # CONFIG_SCSI_AIC79XX is not set
    # CONFIG_SCSI_AIC94XX is not set
    # CONFIG_SCSI_DPT_I2O is not set
    # CONFIG_SCSI_ADVANSYS is not set
    # CONFIG_SCSI_ARCMSR is not set
    # CONFIG_MEGARAID_NEWGEN is not set
    # CONFIG_MEGARAID_LEGACY is not set
    # CONFIG_MEGARAID_SAS is not set
    # CONFIG_SCSI_HPTIOP is not set
    # CONFIG_SCSI_BUSLOGIC is not set
    # CONFIG_SCSI_DMX3191D is not set
    # CONFIG_SCSI_EATA is not set
    # CONFIG_SCSI_FUTURE_DOMAIN is not set
    # CONFIG_SCSI_GDTH is not set
    # CONFIG_SCSI_IPS is not set
    # CONFIG_SCSI_INITIO is not set
    # CONFIG_SCSI_INIA100 is not set
    # CONFIG_SCSI_STEX is not set
    # CONFIG_SCSI_SYM53C8XX_2 is not set
    # CONFIG_SCSI_IPR is not set
    # CONFIG_SCSI_QLOGIC_1280 is not set
    # CONFIG_SCSI_QLA_FC is not set
    # CONFIG_SCSI_QLA_ISCSI is not set
    # CONFIG_SCSI_LPFC is not set
    # CONFIG_SCSI_DC395x is not set
    # CONFIG_SCSI_DC390T is not set
    # CONFIG_SCSI_NSP32 is not set
    # CONFIG_SCSI_DEBUG is not set
    # CONFIG_SCSI_SRP is not set

    #
    # Serial ATA (prod) and Parallel ATA (experimental) drivers
    #
    CONFIG_ATA=y
    # CONFIG_ATA_NONSTANDARD is not set
    CONFIG_SATA_AHCI=y
    # CONFIG_SATA_SVW is not set
    # CONFIG_ATA_PIIX is not set
    # CONFIG_SATA_MV is not set
    # CONFIG_SATA_NV is not set
    # CONFIG_PDC_ADMA is not set
    # CONFIG_SATA_QSTOR is not set
    # CONFIG_SATA_PROMISE is not set
    # CONFIG_SATA_SX4 is not set
    # CONFIG_SATA_SIL is not set
    # CONFIG_SATA_SIL24 is not set
    # CONFIG_SATA_SIS is not set
    # CONFIG_SATA_ULI is not set
    # CONFIG_SATA_VIA is not set
    # CONFIG_SATA_VITESSE is not set
    # CONFIG_SATA_INIC162X is not set
    CONFIG_SATA_ACPI=y
    # CONFIG_PATA_ALI is not set
    # CONFIG_PATA_AMD is not set
    # CONFIG_PATA_ARTOP is not set
    CONFIG_PATA_ATIIXP=y
    # CONFIG_PATA_CMD64X is not set
    # CONFIG_PATA_CS5520 is not set
    # CONFIG_PATA_CS5530 is not set
    # CONFIG_PATA_CS5535 is not set
    # CONFIG_PATA_CYPRESS is not set
    # CONFIG_PATA_EFAR is not set
    # CONFIG_ATA_GENERIC is not set
    # CONFIG_PATA_HPT366 is not set
    # CONFIG_PATA_HPT37X is not set
    # CONFIG_PATA_HPT3X2N is not set
    # CONFIG_PATA_HPT3X3 is not set
    # CONFIG_PATA_IT821X is not set
    # CONFIG_PATA_IT8213 is not set
    # CONFIG_PATA_JMICRON is not set
    # CONFIG_PATA_TRIFLEX is not set
    # CONFIG_PATA_MARVELL is not set
    # CONFIG_PATA_MPIIX is not set
    # CONFIG_PATA_OLDPIIX is not set
    # CONFIG_PATA_NETCELL is not set
    # CONFIG_PATA_NS87410 is not set
    # CONFIG_PATA_OPTI is not set
    # CONFIG_PATA_OPTIDMA is not set
    # CONFIG_PATA_PDC_OLD is not set
    # CONFIG_PATA_RADISYS is not set
    # CONFIG_PATA_RZ1000 is not set
    # CONFIG_PATA_SC1200 is not set
    # CONFIG_PATA_SERVERWORKS is not set
    # CONFIG_PATA_PDC2027X is not set
    # CONFIG_PATA_SIL680 is not set
    # CONFIG_PATA_SIS is not set
    # CONFIG_PATA_VIA is not set
    # CONFIG_PATA_WINBOND is not set

    #
    # Multi-device support (RAID and LVM)
    #
    # CONFIG_MD is not set

    #
    # Fusion MPT device support
    #
    # CONFIG_FUSION is not set
    # CONFIG_FUSION_SPI is not set
    # CONFIG_FUSION_FC is not set
    # CONFIG_FUSION_SAS is not set

    #
    # IEEE 1394 (FireWire) support
    #
    # CONFIG_IEEE1394 is not set

    #
    # I2O device support
    #
    # CONFIG_I2O is not set

    #
    # Macintosh device drivers
    #
    # CONFIG_MAC_EMUMOUSEBTN is not set

    #
    # Network device support
    #
    CONFIG_NETDEVICES=y
    # CONFIG_DUMMY is not set
    # CONFIG_BONDING is not set
    # CONFIG_EQUALIZER is not set
    # CONFIG_TUN is not set
    # CONFIG_NET_SB1000 is not set

    #
    # ARCnet devices
    #
    # CONFIG_ARCNET is not set

    #
    # PHY device support
    #
    # CONFIG_PHYLIB is not set

    #
    # Ethernet (10 or 100Mbit)
    #
    CONFIG_NET_ETHERNET=y
    CONFIG_MII=y
    # CONFIG_HAPPYMEAL is not set
    # CONFIG_SUNGEM is not set
    # CONFIG_CASSINI is not set
    # CONFIG_NET_VENDOR_3COM is not set

    #
    # Tulip family network device support
    #
    # CONFIG_NET_TULIP is not set
    # CONFIG_HP100 is not set
    CONFIG_NET_PCI=y
    # CONFIG_PCNET32 is not set
    # CONFIG_AMD8111_ETH is not set
    # CONFIG_ADAPTEC_STARFIRE is not set
    CONFIG_B44=y
    # CONFIG_FORCEDETH is not set
    # CONFIG_DGRS is not set
    # CONFIG_EEPRO100 is not set
    # CONFIG_E100 is not set
    # CONFIG_FEALNX is not set
    # CONFIG_NATSEMI is not set
    # CONFIG_NE2K_PCI is not set
    # CONFIG_8139CP is not set
    # CONFIG_8139TOO is not set
    # CONFIG_SIS900 is not set
    # CONFIG_EPIC100 is not set
    # CONFIG_SUNDANCE is not set
    # CONFIG_TLAN is not set
    # CONFIG_VIA_RHINE is not set
    # CONFIG_SC92031 is not set

    #
    # Ethernet (1000 Mbit)
    #
    # CONFIG_ACENIC is not set
    # CONFIG_DL2K is not set
    # CONFIG_E1000 is not set
    # CONFIG_NS83820 is not set
    # CONFIG_HAMACHI is not set
    # CONFIG_YELLOWFIN is not set
    # CONFIG_R8169 is not set
    # CONFIG_SIS190 is not set
    # CONFIG_SKGE is not set
    # CONFIG_SKY2 is not set
    # CONFIG_SK98LIN is not set
    # CONFIG_VIA_VELOCITY is not set
    # CONFIG_TIGON3 is not set
    # CONFIG_BNX2 is not set
    # CONFIG_QLA3XXX is not set
    # CONFIG_ATL1 is not set

    #
    # Ethernet (10000 Mbit)
    #
    # CONFIG_CHELSIO_T1 is not set
    # CONFIG_CHELSIO_T3 is not set
    # CONFIG_IXGB is not set
    # CONFIG_S2IO is not set
    # CONFIG_MYRI10GE is not set
    # CONFIG_NETXEN_NIC is not set

    #
    # Token Ring devices
    #
    # CONFIG_TR is not set

    #
    # Wireless LAN (non-hamradio)
    #
    # CONFIG_NET_RADIO is not set

    #
    # Wan interfaces
    #
    # CONFIG_WAN is not set
    # CONFIG_FDDI is not set
    # CONFIG_HIPPI is not set
    # CONFIG_PPP is not set
    # CONFIG_SLIP is not set
    # CONFIG_NET_FC is not set
    # CONFIG_SHAPER is not set
    # CONFIG_NETCONSOLE is not set
    # CONFIG_NETPOLL is not set
    # CONFIG_NET_POLL_CONTROLLER is not set

    #
    # ISDN subsystem
    #
    # CONFIG_ISDN is not set

    #
    # Telephony Support
    #
    # CONFIG_PHONE is not set

    #
    # Input device support
    #
    CONFIG_INPUT=y
    # CONFIG_INPUT_FF_MEMLESS is not set

    #
    # Userland interfaces
    #
    CONFIG_INPUT_MOUSEDEV=y
    # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    # CONFIG_INPUT_JOYDEV is not set
    # CONFIG_INPUT_TSDEV is not set
    # CONFIG_INPUT_EVDEV is not set
    # CONFIG_INPUT_EVBUG is not set

    #
    # Input Device Drivers
    #
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ATKBD=y
    # CONFIG_KEYBOARD_SUNKBD is not set
    # CONFIG_KEYBOARD_LKKBD is not set
    # CONFIG_KEYBOARD_XTKBD is not set
    # CONFIG_KEYBOARD_NEWTON is not set
    # CONFIG_KEYBOARD_STOWAWAY is not set
    # CONFIG_INPUT_MOUSE is not set
    # CONFIG_INPUT_JOYSTICK is not set
    # CONFIG_INPUT_TOUCHSCREEN is not set
    # CONFIG_INPUT_MISC is not set

    #
    # Hardware I/O ports
    #
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=y
    # CONFIG_SERIO_SERPORT is not set
    # CONFIG_SERIO_CT82C710 is not set
    # CONFIG_SERIO_PCIPS2 is not set
    CONFIG_SERIO_LIBPS2=y
    # CONFIG_SERIO_RAW is not set
    # CONFIG_GAMEPORT is not set

    #
    # Character devices
    #
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    # CONFIG_VT_HW_CONSOLE_BINDING is not set
    # CONFIG_SERIAL_NONSTANDARD is not set

    #
    # Serial drivers
    #
    # CONFIG_SERIAL_8250 is not set

    #
    # Non-8250 serial port support
    #
    # CONFIG_SERIAL_JSM is not set
    CONFIG_UNIX98_PTYS=y
    # CONFIG_LEGACY_PTYS is not set

    #
    # IPMI
    #
    # CONFIG_IPMI_HANDLER is not set

    #
    # Watchdog Cards
    #
    # CONFIG_WATCHDOG is not set
    # CONFIG_HW_RANDOM is not set
    # CONFIG_NVRAM is not set
    CONFIG_RTC=y
    # CONFIG_DTLK is not set
    # CONFIG_R3964 is not set
    # CONFIG_APPLICOM is not set
    # CONFIG_SONYPI is not set
    CONFIG_AGP=y
    # CONFIG_AGP_ALI is not set
    CONFIG_AGP_ATI=y
    # CONFIG_AGP_AMD is not set
    # CONFIG_AGP_AMD64 is not set
    # CONFIG_AGP_INTEL is not set
    # CONFIG_AGP_NVIDIA is not set
    # CONFIG_AGP_SIS is not set
    # CONFIG_AGP_SWORKS is not set
    # CONFIG_AGP_VIA is not set
    # CONFIG_AGP_EFFICEON is not set
    # CONFIG_DRM is not set
    # CONFIG_MWAVE is not set
    # CONFIG_PC8736x_GPIO is not set
    # CONFIG_NSC_GPIO is not set
    # CONFIG_CS5535_GPIO is not set
    # CONFIG_RAW_DRIVER is not set
    # CONFIG_HPET is not set
    # CONFIG_HANGCHECK_TIMER is not set

    #
    # TPM devices
    #
    # CONFIG_TCG_TPM is not set
    # CONFIG_TELCLOCK is not set

    #
    # I2C support
    #
    # CONFIG_I2C is not set

    #
    # SPI support
    #
    # CONFIG_SPI is not set
    # CONFIG_SPI_MASTER is not set

    #
    # Dallas's 1-wire bus
    #
    # CONFIG_W1 is not set

    #
    # Hardware Monitoring support
    #
    # CONFIG_HWMON is not set
    # CONFIG_HWMON_VID is not set

    #
    # Multifunction device drivers
    #
    # CONFIG_MFD_SM501 is not set

    #
    # Multimedia devices
    #
    # CONFIG_VIDEO_DEV is not set

    #
    # Digital Video Broadcasting Devices
    #
    # CONFIG_DVB is not set
    # CONFIG_USB_DABUSB is not set

    #
    # Graphics support
    #
    # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
    CONFIG_FB=y
    # CONFIG_FIRMWARE_EDID is not set
    # CONFIG_FB_DDC is not set
    CONFIG_FB_CFB_FILLRECT=y
    CONFIG_FB_CFB_COPYAREA=y
    CONFIG_FB_CFB_IMAGEBLIT=y
    # CONFIG_FB_SVGALIB is not set
    # CONFIG_FB_MACMODES is not set
    # CONFIG_FB_BACKLIGHT is not set
    # CONFIG_FB_MODE_HELPERS is not set
    # CONFIG_FB_TILEBLITTING is not set

    #
    # Frambuffer hardware drivers
    #
    # CONFIG_FB_CIRRUS is not set
    # CONFIG_FB_PM2 is not set
    # CONFIG_FB_CYBER2000 is not set
    # CONFIG_FB_ARC is not set
    # CONFIG_FB_ASILIANT is not set
    # CONFIG_FB_IMSTT is not set
    # CONFIG_FB_VGA16 is not set
    CONFIG_FB_VESA=y
    # CONFIG_FB_HGA is not set
    # CONFIG_FB_S1D13XXX is not set
    # CONFIG_FB_NVIDIA is not set
    # CONFIG_FB_RIVA is not set
    # CONFIG_FB_I810 is not set
    # CONFIG_FB_INTEL is not set
    # CONFIG_FB_MATROX is not set
    # CONFIG_FB_RADEON is not set
    # CONFIG_FB_ATY128 is not set
    # CONFIG_FB_ATY is not set
    # CONFIG_FB_S3 is not set
    # CONFIG_FB_SAVAGE is not set
    # CONFIG_FB_SIS is not set
    # CONFIG_FB_NEOMAGIC is not set
    # CONFIG_FB_KYRO is not set
    # CONFIG_FB_3DFX is not set
    # CONFIG_FB_VOODOO1 is not set
    # CONFIG_FB_CYBLA is not set
    # CONFIG_FB_TRIDENT is not set
    # CONFIG_FB_GEODE is not set
    # CONFIG_FB_VIRTUAL is not set

    #
    # Console display driver support
    #
    CONFIG_VGA_CONSOLE=y
    CONFIG_VGACON_SOFT_SCROLLBACK=y
    CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128
    CONFIG_VIDEO_SELECT=y
    CONFIG_DUMMY_CONSOLE=y
    CONFIG_FRAMEBUFFER_CONSOLE=y
    # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
    # CONFIG_FONTS is not set
    CONFIG_FONT_8x8=y
    CONFIG_FONT_8x16=y

    #
    # Logo configuration
    #
    # CONFIG_LOGO is not set

    #
    # Sound
    #
    CONFIG_SOUND=y

    #
    # Advanced Linux Sound Architecture
    #
    CONFIG_SND=y
    CONFIG_SND_TIMER=y
    CONFIG_SND_PCM=y
    # CONFIG_SND_SEQUENCER is not set
    CONFIG_SND_OSSEMUL=y
    CONFIG_SND_MIXER_OSS=y
    CONFIG_SND_PCM_OSS=y
    CONFIG_SND_PCM_OSS_PLUGINS=y
    # CONFIG_SND_RTCTIMER is not set
    # CONFIG_SND_DYNAMIC_MINORS is not set
    # CONFIG_SND_SUPPORT_OLD_API is not set
    # CONFIG_SND_VERBOSE_PROCFS is not set
    # CONFIG_SND_VERBOSE_PRINTK is not set
    # CONFIG_SND_DEBUG is not set

    #
    # Generic devices
    #
    # CONFIG_SND_DUMMY is not set
    # CONFIG_SND_MTPAV is not set
    # CONFIG_SND_SERIAL_U16550 is not set
    # CONFIG_SND_MPU401 is not set

    #
    # PCI devices
    #
    # CONFIG_SND_AD1889 is not set
    # CONFIG_SND_ALS300 is not set
    # CONFIG_SND_ALS4000 is not set
    # CONFIG_SND_ALI5451 is not set
    # CONFIG_SND_ATIIXP is not set
    # CONFIG_SND_ATIIXP_MODEM is not set
    # CONFIG_SND_AU8810 is not set
    # CONFIG_SND_AU8820 is not set
    # CONFIG_SND_AU8830 is not set
    # CONFIG_SND_AZT3328 is not set
    # CONFIG_SND_BT87X is not set
    # CONFIG_SND_CA0106 is not set
    # CONFIG_SND_CMIPCI is not set
    # CONFIG_SND_CS4281 is not set
    # CONFIG_SND_CS46XX is not set
    # CONFIG_SND_CS5535AUDIO is not set
    # CONFIG_SND_DARLA20 is not set
    # CONFIG_SND_GINA20 is not set
    # CONFIG_SND_LAYLA20 is not set
    # CONFIG_SND_DARLA24 is not set
    # CONFIG_SND_GINA24 is not set
    # CONFIG_SND_LAYLA24 is not set
    # CONFIG_SND_MONA is not set
    # CONFIG_SND_MIA is not set
    # CONFIG_SND_ECHO3G is not set
    # CONFIG_SND_INDIGO is not set
    # CONFIG_SND_INDIGOIO is not set
    # CONFIG_SND_INDIGODJ is not set
    # CONFIG_SND_EMU10K1 is not set
    # CONFIG_SND_EMU10K1X is not set
    # CONFIG_SND_ENS1370 is not set
    # CONFIG_SND_ENS1371 is not set
    # CONFIG_SND_ES1938 is not set
    # CONFIG_SND_ES1968 is not set
    # CONFIG_SND_FM801 is not set
    CONFIG_SND_HDA_INTEL=y
    # CONFIG_SND_HDSP is not set
    # CONFIG_SND_HDSPM is not set
    # CONFIG_SND_ICE1712 is not set
    # CONFIG_SND_ICE1724 is not set
    # CONFIG_SND_INTEL8X0 is not set
    # CONFIG_SND_INTEL8X0M is not set
    # CONFIG_SND_KORG1212 is not set
    # CONFIG_SND_MAESTRO3 is not set
    # CONFIG_SND_MIXART is not set
    # CONFIG_SND_NM256 is not set
    # CONFIG_SND_PCXHR is not set
    # CONFIG_SND_RIPTIDE is not set
    # CONFIG_SND_RME32 is not set
    # CONFIG_SND_RME96 is not set
    # CONFIG_SND_RME9652 is not set
    # CONFIG_SND_SONICVIBES is not set
    # CONFIG_SND_TRIDENT is not set
    # CONFIG_SND_VIA82XX is not set
    # CONFIG_SND_VIA82XX_MODEM is not set
    # CONFIG_SND_VX222 is not set
    # CONFIG_SND_YMFPCI is not set

    #
    # USB devices
    #
    # CONFIG_SND_USB_AUDIO is not set
    # CONFIG_SND_USB_USX2Y is not set

    #
    # SoC audio support
    #
    # CONFIG_SND_SOC is not set

    #
    # Open Sound System
    #
    # CONFIG_SOUND_PRIME is not set

    #
    # HID Devices
    #
    CONFIG_HID=y
    # CONFIG_HID_DEBUG is not set

    #
    # USB support
    #
    CONFIG_USB_ARCH_HAS_HCD=y
    CONFIG_USB_ARCH_HAS_OHCI=y
    CONFIG_USB_ARCH_HAS_EHCI=y
    CONFIG_USB=y
    # CONFIG_USB_DEBUG is not set

    #
    # Miscellaneous USB options
    #
    CONFIG_USB_DEVICEFS=y
    # CONFIG_USB_DYNAMIC_MINORS is not set
    # CONFIG_USB_SUSPEND is not set
    # CONFIG_USB_OTG is not set

    #
    # USB Host Controller Drivers
    #
    CONFIG_USB_EHCI_HCD=y
    # CONFIG_USB_EHCI_SPLIT_ISO is not set
    # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
    # CONFIG_USB_EHCI_TT_NEWSCHED is not set
    # CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
    # CONFIG_USB_ISP116X_HCD is not set
    CONFIG_USB_OHCI_HCD=y
    # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
    # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
    CONFIG_USB_OHCI_LITTLE_ENDIAN=y
    # CONFIG_USB_UHCI_HCD is not set
    # CONFIG_USB_SL811_HCD is not set

    #
    # USB Device Class drivers
    #
    CONFIG_USB_ACM=y
    # CONFIG_USB_PRINTER is not set

    #
    # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
    #

    #
    # may also be needed; see USB_STORAGE Help for more information
    #
    CONFIG_USB_STORAGE=y
    # CONFIG_USB_STORAGE_DEBUG is not set
    # CONFIG_USB_STORAGE_DATAFAB is not set
    # CONFIG_USB_STORAGE_FREECOM is not set
    # CONFIG_USB_STORAGE_DPCM is not set
    # CONFIG_USB_STORAGE_USBAT is not set
    # CONFIG_USB_STORAGE_SDDR09 is not set
    # CONFIG_USB_STORAGE_SDDR55 is not set
    # CONFIG_USB_STORAGE_JUMPSHOT is not set
    # CONFIG_USB_STORAGE_ALAUDA is not set
    # CONFIG_USB_STORAGE_KARMA is not set
    # CONFIG_USB_LIBUSUAL is not set

    #
    # USB Input Devices
    #
    CONFIG_USB_HID=y
    # CONFIG_USB_HIDINPUT_POWERBOOK is not set
    # CONFIG_HID_FF is not set
    # CONFIG_USB_HIDDEV is not set
    # CONFIG_USB_AIPTEK is not set
    # CONFIG_USB_WACOM is not set
    # CONFIG_USB_ACECAD is not set
    # CONFIG_USB_KBTAB is not set
    # CONFIG_USB_POWERMATE is not set
    # CONFIG_USB_TOUCHSCREEN is not set
    # CONFIG_USB_YEALINK is not set
    # CONFIG_USB_XPAD is not set
    # CONFIG_USB_ATI_REMOTE is not set
    # CONFIG_USB_ATI_REMOTE2 is not set
    # CONFIG_USB_KEYSPAN_REMOTE is not set
    # CONFIG_USB_APPLETOUCH is not set
    # CONFIG_USB_GTCO is not set

    #
    # USB Imaging devices
    #
    # CONFIG_USB_MDC800 is not set
    # CONFIG_USB_MICROTEK is not set

    #
    # USB Network Adapters
    #
    # CONFIG_USB_CATC is not set
    # CONFIG_USB_KAWETH is not set
    # CONFIG_USB_PEGASUS is not set
    # CONFIG_USB_RTL8150 is not set
    # CONFIG_USB_USBNET_MII is not set
    # CONFIG_USB_USBNET is not set
    # CONFIG_USB_MON is not set

    #
    # USB port drivers
    #

    #
    # USB Serial Converter support
    #
    # CONFIG_USB_SERIAL is not set

    #
    # USB Miscellaneous drivers
    #
    # CONFIG_USB_EMI62 is not set
    # CONFIG_USB_EMI26 is not set
    # CONFIG_USB_ADUTUX is not set
    # CONFIG_USB_AUERSWALD is not set
    # CONFIG_USB_RIO500 is not set
    # CONFIG_USB_LEGOTOWER is not set
    # CONFIG_USB_LCD is not set
    # CONFIG_USB_BERRY_CHARGE is not set
    # CONFIG_USB_LED is not set
    # CONFIG_USB_CYPRESS_CY7C63 is not set
    # CONFIG_USB_CYTHERM is not set
    # CONFIG_USB_PHIDGET is not set
    # CONFIG_USB_IDMOUSE is not set
    # CONFIG_USB_FTDI_ELAN is not set
    # CONFIG_USB_APPLEDISPLAY is not set
    # CONFIG_USB_SISUSBVGA is not set
    # CONFIG_USB_LD is not set
    # CONFIG_USB_TRANCEVIBRATOR is not set
    # CONFIG_USB_IOWARRIOR is not set
    # CONFIG_USB_TEST is not set

    #
    # USB DSL modem support
    #

    #
    # USB Gadget Support
    #
    # CONFIG_USB_GADGET is not set

    #
    # MMC/SD Card support
    #
    # CONFIG_MMC is not set

    #
    # LED devices
    #
    # CONFIG_NEW_LEDS is not set

    #
    # LED drivers
    #

    #
    # LED Triggers
    #

    #
    # InfiniBand support
    #
    # CONFIG_INFINIBAND is not set

    #
    # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
    #
    # CONFIG_EDAC is not set

    #
    # Real Time Clock
    #
    # CONFIG_RTC_CLASS is not set

    #
    # DMA Engine support
    #
    # CONFIG_DMA_ENGINE is not set

    #
    # DMA Clients
    #

    #
    # DMA Devices
    #

    #
    # Auxiliary Display support
    #

    #
    # Virtualization
    #
    # CONFIG_KVM is not set

    #
    # File systems
    #
    # CONFIG_EXT2_FS is not set
    CONFIG_EXT3_FS=y
    # CONFIG_EXT3_FS_XATTR is not set
    # CONFIG_EXT4DEV_FS is not set
    CONFIG_JBD=y
    # CONFIG_JBD_DEBUG is not set
    # CONFIG_REISERFS_FS is not set
    # CONFIG_JFS_FS is not set
    # CONFIG_FS_POSIX_ACL is not set
    # CONFIG_XFS_FS is not set
    # CONFIG_GFS2_FS is not set
    # CONFIG_OCFS2_FS is not set
    # CONFIG_MINIX_FS is not set
    # CONFIG_ROMFS_FS is not set
    CONFIG_INOTIFY=y
    CONFIG_INOTIFY_USER=y
    # CONFIG_QUOTA is not set
    CONFIG_DNOTIFY=y
    # CONFIG_AUTOFS_FS is not set
    # CONFIG_AUTOFS4_FS is not set
    # CONFIG_FUSE_FS is not set

    #
    # CD-ROM/DVD Filesystems
    #
    CONFIG_ISO9660_FS=y
    CONFIG_JOLIET=y
    # CONFIG_ZISOFS is not set
    CONFIG_UDF_FS=m
    CONFIG_UDF_NLS=y

    #
    # DOS/FAT/NT Filesystems
    #
    CONFIG_FAT_FS=m
    # CONFIG_MSDOS_FS is not set
    CONFIG_VFAT_FS=m
    CONFIG_FAT_DEFAULT_CODEPAGE=437
    CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
    # CONFIG_NTFS_FS is not set

    #
    # Pseudo filesystems
    #
    CONFIG_PROC_FS=y
    CONFIG_PROC_KCORE=y
    CONFIG_PROC_SYSCTL=y
    CONFIG_SYSFS=y
    CONFIG_TMPFS=y
    # CONFIG_TMPFS_POSIX_ACL is not set
    # CONFIG_HUGETLBFS is not set
    # CONFIG_HUGETLB_PAGE is not set
    CONFIG_RAMFS=y
    # CONFIG_CONFIGFS_FS is not set

    #
    # Miscellaneous filesystems
    #
    # CONFIG_ADFS_FS is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_HFS_FS is not set
    # CONFIG_HFSPLUS_FS is not set
    # CONFIG_BEFS_FS is not set
    # CONFIG_BFS_FS is not set
    # CONFIG_EFS_FS is not set
    # CONFIG_CRAMFS is not set
    # CONFIG_VXFS_FS is not set
    # CONFIG_HPFS_FS is not set
    # CONFIG_QNX4FS_FS is not set
    # CONFIG_SYSV_FS is not set
    # CONFIG_UFS_FS is not set

    #
    # Network File Systems
    #
    # CONFIG_NFS_FS is not set
    # CONFIG_NFSD is not set
    # CONFIG_SMB_FS is not set
    CONFIG_CIFS=m
    # CONFIG_CIFS_STATS is not set
    # CONFIG_CIFS_WEAK_PW_HASH is not set
    # CONFIG_CIFS_XATTR is not set
    # CONFIG_CIFS_DEBUG2 is not set
    # CONFIG_CIFS_EXPERIMENTAL is not set
    # CONFIG_NCP_FS is not set
    # CONFIG_CODA_FS is not set
    # CONFIG_AFS_FS is not set
    # CONFIG_9P_FS is not set

    #
    # Partition Types
    #
    # CONFIG_PARTITION_ADVANCED is not set
    CONFIG_MSDOS_PARTITION=y

    #
    # Native Language Support
    #
    CONFIG_NLS=y
    CONFIG_NLS_DEFAULT="iso8859-1"
    CONFIG_NLS_CODEPAGE_437=m
    # CONFIG_NLS_CODEPAGE_737 is not set
    # CONFIG_NLS_CODEPAGE_775 is not set
    # CONFIG_NLS_CODEPAGE_850 is not set
    # CONFIG_NLS_CODEPAGE_852 is not set
    # CONFIG_NLS_CODEPAGE_855 is not set
    # CONFIG_NLS_CODEPAGE_857 is not set
    # CONFIG_NLS_CODEPAGE_860 is not set
    # CONFIG_NLS_CODEPAGE_861 is not set
    # CONFIG_NLS_CODEPAGE_862 is not set
    # CONFIG_NLS_CODEPAGE_863 is not set
    # CONFIG_NLS_CODEPAGE_864 is not set
    # CONFIG_NLS_CODEPAGE_865 is not set
    # CONFIG_NLS_CODEPAGE_866 is not set
    # CONFIG_NLS_CODEPAGE_869 is not set
    # CONFIG_NLS_CODEPAGE_936 is not set
    # CONFIG_NLS_CODEPAGE_950 is not set
    # CONFIG_NLS_CODEPAGE_932 is not set
    # CONFIG_NLS_CODEPAGE_949 is not set
    # CONFIG_NLS_CODEPAGE_874 is not set
    # CONFIG_NLS_ISO8859_8 is not set
    # CONFIG_NLS_CODEPAGE_1250 is not set
    # CONFIG_NLS_CODEPAGE_1251 is not set
    # CONFIG_NLS_ASCII is not set
    CONFIG_NLS_ISO8859_1=m
    # CONFIG_NLS_ISO8859_2 is not set
    # CONFIG_NLS_ISO8859_3 is not set
    # CONFIG_NLS_ISO8859_4 is not set
    # CONFIG_NLS_ISO8859_5 is not set
    # CONFIG_NLS_ISO8859_6 is not set
    # CONFIG_NLS_ISO8859_7 is not set
    # CONFIG_NLS_ISO8859_9 is not set
    # CONFIG_NLS_ISO8859_13 is not set
    # CONFIG_NLS_ISO8859_14 is not set
    # CONFIG_NLS_ISO8859_15 is not set
    # CONFIG_NLS_KOI8_R is not set
    # CONFIG_NLS_KOI8_U is not set
    CONFIG_NLS_UTF8=m

    #
    # Distributed Lock Manager
    #
    # CONFIG_DLM is not set

    #
    # Instrumentation Support
    #
    # CONFIG_PROFILING is not set
    # CONFIG_KPROBES is not set

    #
    # Kernel hacking
    #
    CONFIG_TRACE_IRQFLAGS_SUPPORT=y
    # CONFIG_PRINTK_TIME is not set
    # CONFIG_ENABLE_MUST_CHECK is not set
    # CONFIG_MAGIC_SYSRQ is not set
    # CONFIG_UNUSED_SYMBOLS is not set
    # CONFIG_DEBUG_FS is not set
    # CONFIG_HEADERS_CHECK is not set
    # CONFIG_DEBUG_KERNEL is not set
    CONFIG_LOG_BUF_SHIFT=15
    CONFIG_DEBUG_BUGVERBOSE=y
    CONFIG_EARLY_PRINTK=y
    CONFIG_X86_FIND_SMP_CONFIG=y
    CONFIG_X86_MPPARSE=y
    CONFIG_DOUBLEFAULT=y

    #
    # Security options
    #
    # CONFIG_KEYS is not set
    # CONFIG_SECURITY is not set

    #
    # Cryptographic options
    #
    # CONFIG_CRYPTO is not set

    #
    # Library routines
    #
    CONFIG_BITREVERSE=y
    # CONFIG_CRC_CCITT is not set
    # CONFIG_CRC16 is not set
    CONFIG_CRC32=y
    # CONFIG_LIBCRC32C is not set
    CONFIG_PLIST=y
    CONFIG_HAS_IOMEM=y
    CONFIG_HAS_IOPORT=y
    CONFIG_GENERIC_HARDIRQS=y
    CONFIG_GENERIC_IRQ_PROBE=y
    CONFIG_GENERIC_PENDING_IRQ=y
    CONFIG_X86_SMP=y
    CONFIG_X86_HT=y
    CONFIG_X86_BIOS_REBOOT=y
    CONFIG_X86_TRAMPOLINE=y
    CONFIG_KTIME_SCALAR=y
    \
     
     \ /
      Last update: 2007-04-19 23:23    [W:5.271 / U:0.032 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site