lkml.org 
[lkml]   [2007]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: 2.6.21-rc6-mm1 ATA HPT37x regression
    >>>>> "John" == John Stoffel <john@stoffel.org> writes:

    >>> > Ok, so do I need to do anything special with the next -mm release and
    >>> > the next version?
    >>>
    >>> Well, let Alan decide that (2Alan: and I said that HPT code is bogus :-).

    Alan> Try drivers/ide/pci/hpt366 - if that works grab a dmesg and let
    Alan> me know. It means that Sergei's DPLL sync code seems to work
    Alan> better than the vendor code and its time to swap it over.

    John> Ok, I'll give that a whirl under 2.6.21-rc7 tonight. I'll build them
    John> in modular so I can switch around more easily. I hope. :]

    Ok, here's the dmesg output using the hpt366 old IDE driver,
    2.6.21-rc7, SMP:

    [ 160.926355] HPT302: IDE controller at PCI slot 0000:03:06.0
    [ 160.928030] ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 18 (level, low) -> IRQ
    18
    [ 160.931212] HPT302: chipset revision 1
    [ 160.932801] HPT302: DPLL base: 66 MHz, f_CNT: 100, assuming 33 MHz PCI
    [ 160.941157] HPT302: using 66 MHz DPLL clock
    [ 160.942646] HPT302: 100% native mode on irq 18
    [ 160.943918] ide2: BM-DMA at 0xe800-0xe807, BIOS settings: hde:DMA, hdf:pi
    o
    [ 160.946636] ide3: BM-DMA at 0xe808-0xe80f, BIOS settings: hdg:DMA, hdh:pi
    o
    [ 160.949439] Probing IDE interface ide2...
    [ 161.213560] hde: WDC WD1200JB-00CRA1, ATA DISK drive
    [ 161.828020] ide2 at 0xecf8-0xecff,0xecf2 on irq 18
    [ 161.829616] Probing IDE interface ide3...
    [ 162.094086] hdg: WDC WD1200JB-00EVA0, ATA DISK drive
    [ 162.709002] ide3 at 0xece0-0xece7,0xecda on irq 18


    Which looks ok to me I guess. It found my MD disks on there and
    assmebled them, eventually. *grin*

    I'll reboot and send out the corresponding ATA HPT37x driver dmesg...

    John

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2007-04-19 03:37    [W:0.022 / U:126.840 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site