lkml.org 
[lkml]   [2007]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: 2.6.21-rc5 from fc7-rc2 problems
    Stephen Clark wrote:

    >Andrew Morton wrote:
    >
    >
    >
    >>On Sat, 31 Mar 2007 16:14:01 -0400 Stephen Clark <Stephen.Clark@seclark.us> wrote:
    >>
    >>
    >>
    >>
    >>
    >>>Hello,
    >>>
    >>>I have just tried booting the fc7-rc2 live cd on 2 of my laptops and it
    >>>failed on both.
    >>>
    >>>Laptop 1 is an asus vbi s96f that get a panic that says exception in
    >>>interrupt routine
    >>>for my rtl8139.
    >>>
    >>>This device works fine in 2.6.20.2
    >>>
    >>>
    >>>
    >>>
    >>That's regression #1. Are you able to take a photograph of the screen
    >>when it has crashed? Setting the display to 50 rows would make that more
    >>useful. (serial console would be better, but I assume that thing has
    >>no serial port).
    >>
    >>
    >>
    >>
    >>
    >>>The other laptop is a hp n5430 it fail in the ali-pata driver not being
    >>>able to read the cdrom, timeing out
    >>>and dropping into a bash shell telling me to tell it where the root
    >>>filesystem is.
    >>>
    >>>
    >>>
    >>>
    >>That's #2, I guess.
    >>
    >>
    >>
    >>
    >>
    >>>Also it sets my hard
    >>>drive to udma/33 when it run find at udma/66 under 2.6.20.1.
    >>>
    >>>
    >>>
    >>>
    >>#3. Hopefully it's related to #2.
    >>
    >>Please send the full dmesg output for 2.6.20.1 on the n5430.
    >>
    >>
    >>
    >>
    >>
    >>>It would
    >>>really be nice if the people makeing
    >>>all these changes would at least keep things compatible with what they
    >>>were before. These are regressions
    >>>guys!
    >>>
    >>>
    >>>
    >>>
    >>We try ;)
    >>
    >>
    >>
    >>
    >>
    >>>This hp n5430 system works fine with 2.6.20.1.
    >>>
    >>>
    >>>
    >>>
    >>Thanks, it helps.
    >>
    >>
    >>
    >>
    >>
    >>
    >I'll see if I can get a serial port console setup on each laptop,
    >failing that I'll take a
    >photo.
    >
    >Thanks,
    >Steve
    >
    >
    >
    First this actually from fc7-rc3 but it is still 2.6.21-rc5

    Here is the console output from booting the cd 2.6.21-rc5 on my HP N5430
    laptop
    followed by booting fc6 2.6.20.1-2933


    Note: From fedora test 3 release anouncement:
    System Level Changes
    ========
    * Fedora 7 Test 3 features a 2.6.21rc5 based kernel. Current release
    information is being tracked on the kernel release notes source page.
    even though the kernel message below says it is 2.6.20???? maybe fedora
    people can speak to this.

    Linux version 2.6.20-1.3023.fc7
    (brewbuilder@ls20-bc1-13.build.redhat.com) (gcc version 4.1.2 20070317
    (Red Hat 4.1.2-5)) #1 SMP Sun Mar 25 22:12:02 EDT 2007
    BIOS-provided physical RAM map:
    sanitize start
    sanitize end
    copy_e820_map() start: 0000000000000000 size: 000000000009f000 end:
    000000000009f000 type: 1
    copy_e820_map() type is E820_RAM
    copy_e820_map() start: 000000000009f000 size: 0000000000061000 end:
    0000000000100000 type: 2
    copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end:
    000000001fff0000 type: 1
    copy_e820_map() type is E820_RAM
    copy_e820_map() start: 000000001fff0000 size: 000000000000f000 end:
    000000001ffff000 type: 3
    copy_e820_map() start: 000000001ffff000 size: 0000000000001000 end:
    0000000020000000 type: 4
    copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end:
    0000000100000000 type: 2
    BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    BIOS-e820: 000000000009f000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001ffff000 (ACPI data)
    BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    Using x86 segment limits to approximate NX protection
    Entering add_active_range(0, 0, 131056) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 131056
    HighMem 131056 -> 131056
    early_node_map[1] active PFN ranges
    0: 0 -> 131056
    On node 0 totalpages: 131056
    DMA zone: 52 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4044 pages, LIFO batch:0
    Normal zone: 1611 pages used for memmap
    Normal zone: 125349 pages, LIFO batch:31
    HighMem zone: 0 pages used for memmap
    DMI 2.2 present.
    Using APIC driver default
    ACPI: RSDP 000F7C20, 0014 (r0 PTLTD )
    ACPI: RSDT 1FFFCC46, 002C (r1 PTLTD RSDT 6040000 LTP 0)
    ACPI: FACP 1FFFEF64, 0074 (r1 ALI M1533 6040000 PTL F4240)
    ACPI: DSDT 1FFFCC72, 22F2 (r1 COMPAL 736 6040000 MSFT 100000D)
    ACPI: FACS 1FFFFFC0, 0040
    ACPI: BOOT 1FFFEFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    ACPI: PM-Timer IO Port: 0x8008
    Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
    Built 1 zonelists. Total pages: 129393
    Kernel command line: initrd=initrd.img ro quiet
    root=CDLABEL=Fedora-7-Test3-KDE-Live rootfstype=iso9660 livecd nousb
    console=ttyS0,38400 BOOT_IMAGE=vmlinuz
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffd000 (0168e000)
    Enabling fast FPU save and restore... done.
    Initializing CPU#0
    CPU 0 irqstacks, hard=c079e000 soft=c077e000
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    Detected 850.084 MHz processor.
    Console: colour VGA+ 80x25
    Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
    ... MAX_LOCKDEP_SUBCLASSES: 8
    ... MAX_LOCK_DEPTH: 30
    ... MAX_LOCKDEP_KEYS: 2048
    ... CLASSHASH_SIZE: 1024
    ... MAX_LOCKDEP_ENTRIES: 8192
    ... MAX_LOCKDEP_CHAINS: 16384
    ... CHAINHASH_SIZE: 8192
    memory used by lock dependency info: 1096 kB
    per task-struct memory footprint: 1200 bytes
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 505644k/524224k available (2145k kernel code, 17840k reserved,
    1141k data, 248k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffc56000 - 0xfffff000 (3748 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
    .init : 0xc073b000 - 0xc0779000 ( 248 kB)
    .data : 0xc06185ed - 0xc0735c94 (1141 kB)
    .text : 0xc0400000 - 0xc06185ed (2145 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 1701.44 BogoMIPS
    (lpj=850720)
    Security Framework v1.0.0 initialized
    SELinux: Initializing.
    SELinux: Starting in permissive mode
    selinux_register_security: Registering secondary module capability
    Capability LSM initialized as secondary
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000
    00000000 00000000 00000000
    Enabling disabled K7/SSE Support.
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 64K (64 bytes/line)
    CPU: After all inits, caps: 0383f1ff c1c7f9ff 00000000 00000420 00000000
    00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 12k freed
    ACPI: Core revision 20070126
    ACPI: setting ELCR to 0200 (from 0800)
    CPU0: AMD mobile AMD Duron(tm) Processor stepping 00
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    Brought up 1 CPUs
    sizeof(vma)=84 bytes
    sizeof(page)=52 bytes
    sizeof(inode)=564 bytes
    sizeof(dentry)=156 bytes
    sizeof(ext3inode)=800 bytes
    sizeof(buffer_head)=56 bytes
    sizeof(skbuff)=176 bytes
    sizeof(task_struct)=2704 bytes
    PM: Adding info for No Bus:platform
    Time: 17:32:07 Date: 03/01/107
    NET: Registered protocol family 16
    PM: Adding info for No Bus:vtcon0
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd8b0, last bus=1
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    PM: Adding info for acpi:acpi_system:00
    PM: Adding info for acpi:button_power:00
    PM: Adding info for acpi:ACPI0007:00
    PM: Adding info for acpi:device:00
    PM: Adding info for acpi:PNP0C0D:00
    PM: Adding info for acpi:PNP0C0E:00
    PM: Adding info for acpi:PNP0C0A:00
    PM: Adding info for acpi:ACPI0003:00
    PM: Adding info for acpi:PNP0A03:00
    PM: Adding info for acpi:device:01
    PM: Adding info for acpi:device:02
    PM: Adding info for acpi:device:03
    PM: Adding info for acpi:device:04
    PM: Adding info for acpi:PNP0C0F:00
    PM: Adding info for acpi:PNP0C0F:01
    PM: Adding info for acpi:PNP0C0F:02
    PM: Adding info for acpi:PNP0C0F:03
    PM: Adding info for acpi:PNP0C0F:04
    PM: Adding info for acpi:PNP0200:00
    PM: Adding info for acpi:PNP0000:00
    PM: Adding info for acpi:PNP0100:00
    PM: Adding info for acpi:PNP0B00:00
    PM: Adding info for acpi:PNP0C04:00
    PM: Adding info for acpi:PNP0800:00
    PM: Adding info for acpi:PNP0303:00
    PM: Adding info for acpi:PNP0F13:00
    PM: Adding info for acpi:PNP0C02:00
    PM: Adding info for acpi:PNP0700:00
    PM: Adding info for acpi:PNP0401:00
    PM: Adding info for acpi:PNP0501:00
    PM: Adding info for acpi:PNP0C09:00
    PM: Adding info for acpi:thermal:00
    PM: Adding info for acpi:power_resource:00
    PM: Adding info for acpi:PNP0C0B:00
    PM: Adding info for acpi:thermal:01
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    PM: Adding info for No Bus:pci0000:00
    PCI quirk: region 8000-803f claimed by ali7101 ACPI
    PCI quirk: region 8040-805f claimed by ali7101 SMB
    0000:00:0f.0: cannot adjust BAR0 (not I/O)
    0000:00:0f.0: cannot adjust BAR1 (not I/O)
    0000:00:0f.0: cannot adjust BAR2 (not I/O)
    0000:00:0f.0: cannot adjust BAR3 (not I/O)
    Boot video device is 0000:01:00.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    PM: Adding info for pci:0000:00:00.0
    PM: Adding info for pci:0000:00:01.0
    PM: Adding info for pci:0000:00:02.0
    PM: Adding info for pci:0000:00:04.0
    PM: Adding info for pci:0000:00:04.1
    PM: Adding info for pci:0000:00:06.0
    PM: Adding info for pci:0000:00:07.0
    PM: Adding info for pci:0000:00:08.0
    PM: Adding info for pci:0000:00:08.1
    PM: Adding info for pci:0000:00:0f.0
    PM: Adding info for pci:0000:00:10.0
    PM: Adding info for pci:0000:01:00.0
    ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7) *0, disabled.
    ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKU] (IRQs *9)
    ACPI: Power Resource [PFAN] (off)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    PM: Adding info for No Bus:pnp0
    PM: Adding info for pnp:00:00
    PM: Adding info for pnp:00:01
    PM: Adding info for pnp:00:02
    PM: Adding info for pnp:00:03
    PM: Adding info for pnp:00:04
    PM: Adding info for pnp:00:05
    PM: Adding info for pnp:00:06
    PM: Adding info for pnp:00:07
    PM: Adding info for pnp:00:08
    PM: Adding info for pnp:00:09
    PM: Adding info for pnp:00:0a
    pnp: PnP ACPI: found 11 devices
    usbcore: USB support disabled
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
    report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    Time: tsc clocksource has been installed.
    pnp: 00:07: ioport range 0x3810-0x381f has been reserved
    pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
    pnp: 00:07: ioport range 0x8000-0x805f could not be reserved
    pnp: 00:07: ioport range 0x4d6-0x4d6 has been reserved
    pnp: 00:07: iomem range 0xfffc0000-0xffffffff has been reserved
    pnp: 00:07: iomem range 0xfec00000-0xfec00fff has been reserved
    PM: Adding info for No Bus:mem
    PM: Adding info for No Bus:null
    PM: Adding info for No Bus:port
    PM: Adding info for No Bus:zero
    PM: Adding info for No Bus:full
    PM: Adding info for No Bus:random
    PM: Adding info for No Bus:urandom
    PM: Adding info for No Bus:kmsg
    PM: Adding info for No Bus:oldmem
    PCI: Bridge: 0000:00:01.0
    IO window: disabled.
    MEM window: ea100000-efffffff
    PREFETCH window: 40000000-400fffff
    PCI: Bus 2, cardbus bridge: 0000:00:04.0
    IO window: 00002000-000020ff
    IO window: 00002400-000024ff
    PREFETCH window: 30000000-33ffffff
    MEM window: 34000000-37ffffff
    PCI: Bus 6, cardbus bridge: 0000:00:04.1
    IO window: 00002800-000028ff
    IO window: 00002c00-00002cff
    PREFETCH window: 38000000-3bffffff
    MEM window: 3c000000-3fffffff
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKA] -> GSI 11 (level,
    low) -> IRQ 11
    ACPI: PCI Interrupt 0000:00:04.1[A] -> Link [LNKA] -> GSI 11 (level,
    low) -> IRQ 11
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 7, 589824 bytes)
    TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    checking if image is initramfs... it is
    Switched to high resolution mode on CPU 0
    Freeing initrd memory: 4175k freed
    Simple Boot Flag at 0x36 set to 0x1
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    PM: Adding info for platform:pcspkr
    PM: Adding info for No Bus:snapshot
    audit: initializing netlink socket (disabled)
    audit(1175448727.052:1): initialized
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    SELinux: Registering netfilter hooks
    ksign: Installing public key data
    Loading keyring
    - Added public key 98F5BBBD6BAE5506
    - User ID: Red Hat, Inc. (Kernel Module GPG key)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Limiting direct PCI/PCI transfers.
    Activating ISA DMA hang workarounds.
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    PM: Adding info for platform:vesafb.0
    ACPI: Transitioning device [FAN] to D3
    ACPI: Transitioning device [FAN] to D3
    ACPI: Fan [FAN] (off)
    ACPI: CPU0 (power states: C1[C1] C2[C2])
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: Thermal Zone [THRM] (53 C)
    Time: acpi_pm clocksource has been installed.
    PM: Adding info for No Bus:pnp1
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    PM: Adding info for No Bus:tty
    PM: Adding info for No Bus:console
    PM: Adding info for No Bus:ptmx
    PM: Adding info for No Bus:tty0
    PM: Adding info for No Bus:vcs
    PM: Adding info for No Bus:vcsa
    PM: Adding info for No Bus:tty1
    PM: Adding info for No Bus:tty2
    PM: Adding info for No Bus:tty3
    PM: Adding info for No Bus:tty4
    PM: Adding info for No Bus:tty5
    PM: Adding info for No Bus:tty6
    PM: Adding info for No Bus:tty7
    PM: Adding info for No Bus:tty8
    PM: Adding info for No Bus:tty9
    PM: Adding info for No Bus:tty10
    PM: Adding info for No Bus:tty11
    PM: Adding info for No Bus:tty12
    PM: Adding info for No Bus:tty13
    PM: Adding info for No Bus:tty14
    PM: Adding info for No Bus:tty15
    PM: Adding info for No Bus:tty16
    PM: Adding info for No Bus:tty17
    PM: Adding info for No Bus:tty18
    PM: Adding info for No Bus:tty19
    PM: Adding info for No Bus:tty20
    PM: Adding info for No Bus:tty21
    PM: Adding info for No Bus:tty22
    PM: Adding info for No Bus:tty23
    PM: Adding info for No Bus:tty24
    PM: Adding info for No Bus:tty25
    PM: Adding info for No Bus:tty26
    PM: Adding info for No Bus:tty27
    PM: Adding info for No Bus:tty28
    PM: Adding info for No Bus:tty29
    PM: Adding info for No Bus:tty30
    PM: Adding info for No Bus:tty31
    PM: Adding info for No Bus:tty32
    PM: Adding info for No Bus:tty33
    PM: Adding info for No Bus:tty34
    PM: Adding info for No Bus:tty35
    PM: Adding info for No Bus:tty36
    PM: Adding info for No Bus:tty37
    PM: Adding info for No Bus:tty38
    PM: Adding info for No Bus:tty39
    PM: Adding info for No Bus:tty40
    PM: Adding info for No Bus:tty41
    PM: Adding info for No Bus:tty42
    PM: Adding info for No Bus:tty43
    PM: Adding info for No Bus:tty44
    PM: Adding info for No Bus:tty45
    PM: Adding info for No Bus:tty46
    PM: Adding info for No Bus:tty47
    PM: Adding info for No Bus:tty48
    PM: Adding info for No Bus:tty49
    PM: Adding info for No Bus:tty50
    PM: Adding info for No Bus:tty51
    PM: Adding info for No Bus:tty52
    PM: Adding info for No Bus:tty53
    PM: Adding info for No Bus:tty54
    PM: Adding info for No Bus:tty55
    PM: Adding info for No Bus:tty56
    PM: Adding info for No Bus:tty57
    PM: Adding info for No Bus:tty58
    PM: Adding info for No Bus:tty59
    PM: Adding info for No Bus:tty60
    PM: Adding info for No Bus:tty61
    PM: Adding info for No Bus:tty62
    PM: Adding info for No Bus:tty63
    PM: Adding info for No Bus:rtc
    Real Time Clock Driver v1.12ac
    PM: Adding info for No Bus:hpet
    PM: Adding info for No Bus:nvram
    Non-volatile memory driver v1.2
    Linux agpgart interface v0.102 (c) Dave Jones
    agpgart: Detected ALi M1647 chipset
    PM: Adding info for No Bus:agpgart
    agpgart: AGP aperture is 64M @ 0xf0000000
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    PM: Adding info for platform:serial8250
    ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    PM: Adding info for No Bus:ttyS0
    PM: Adding info for No Bus:ttyS1
    PM: Adding info for No Bus:ttyS2
    PM: Adding info for No Bus:ttyS3
    PM: Removing info for No Bus:ttyS0
    00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    PM: Adding info for No Bus:ttyS0
    PM: Adding info for No Bus:isa
    RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
    PM: Adding info for No Bus:lo
    input: Macintosh mouse button emulation as /class/input/input0
    Yenta: CardBus bridge found at 0000:00:04.0 [103c:0018]
    Yenta: Enabling burst memory read transactions
    Yenta: Using CSCINT to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:04.0, mfunc 0x009c1b22, devctl 0x66
    Yenta: ISA IRQ mask 0x04b8, PCI irq 11
    Socket status: 30000020
    PM: Adding info for No Bus:pcmcia_socket0
    Yenta: CardBus bridge found at 0000:00:04.1 [103c:0018]
    Yenta: Using CSCINT to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:04.1, mfunc 0x009c1b22, devctl 0x66
    Yenta: ISA IRQ mask 0x04b8, PCI irq 11
    Socket status: 30000006
    PM: Adding info for No Bus:pcmcia_socket1
    PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
    PM: Adding info for platform:i8042
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    PM: Adding info for serio:serio0
    PM: Adding info for serio:serio1
    mice: PS/2 mouse device common for all mice
    pccard: CardBus card inserted into slot 0
    PM: Adding info for pci:0000:02:00.0
    input: AT Translated Set 2 keyboard as /class/input/input1
    TCP bic registered
    Initializing XFRM netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
    powernow: SGTC: 10000
    powernow: Minimum speed 300 MHz. Maximum speed 850 MHz.
    powernow-k8: Processor cpuid 670 not supported
    Using IPI No-Shortcut mode
    Magic number: 3:342:541
    Freeing unused kernel memory: 248k freed
    Write protecting the kernel read-only data: 845k
    input: PS/2 Generic Mouse as /class/input/input2
    SCSI subsystem initialized
    libata version 2.20 loaded.
    ACPI: Unable to derive IRQ for device 0000:00:0f.0
    ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI
    ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011000
    irq 14
    ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011008
    irq 15
    scsi0 : pata_ali
    PM: Adding info for No Bus:host0
    ata1.00: ATA-5: HITACHI_DK23CA-20, 00H1A0A3, max UDMA/100 <========
    drive can do 100
    ata1.00: 39070080 sectors, multi 16: LBA
    ata1.00: configured for UDMA/33 <=============== configured as 33
    scsi1 : pata_ali
    PM: Adding info for No Bus:host1
    ata2.00: ATAPI, max UDMA/33 <=== cd can't be read now
    ata2.00: configured for UDMA/33
    PM: Adding info for No Bus:target0:0:0
    scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23CA-2 00H1 PQ: 0 ANSI: 5
    PM: Adding info for scsi:0:0:0:0
    PM: Adding info for No Bus:target1:0:0
    ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    ata2: soft resetting port
    ATA: abnormal status 0xD0 on port 0x00010177
    ata2.00: failed to IDENTIFY (I/O error, err_mask=0x2)
    ata2.00: revalidation failed (errno=-5)
    ata2: failed to recover some devices, retrying in 5 secs
    ata2: port is slow to respond, please be patient (Status 0xd0)
    ata2: port failed to respond (30 secs, Status 0xd0)
    ata2: soft resetting port
    ATA: abnormal status 0xD0 on port 0x00010177
    ata2.00: failed to IDENTIFY (I/O error, err_mask=0x2)
    ata2.00: revalidation failed (errno=-5)
    ata2.00: limiting speed to UDMA/33:PIO3
    ata2: failed to recover some devices, retrying in 5 secs
    ata2: port is slow to respond, please be patient (Status 0xd0)
    ata2: port failed to respond (30 secs, Status 0xd0)
    ata2: soft resetting port
    ATA: abnormal status 0xD0 on port 0x00010177
    ata2.00: failed to IDENTIFY (I/O error, err_mask=0x2)
    ata2.00: revalidation failed (errno=-5)
    ata2.00: disabled
    ata2: EH complete
    PM: Removing info for No Bus:target1:0:0
    SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: write cache: enabled, read cache: enabled, doesn't
    support DPO or FUA
    SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB)
    sda: Write Protect is off
    sda: Mode Sense: 00 3a 00 00
    SCSI device sda: write cache: enabled, read cache: enabled, doesn't
    support DPO or FUA
    sda: sda1 sda2
    sd 0:0:0:0: Attached scsi disk sda

    --------------------------------------
    WARNING: Cannot find root file system!
    --------------------------------------

    Create symlink /dev/root and then exit this shell to continue
    the boot sequence.


    =============== end of first dmesg =======================
    Linux version 2.6.20-1.2933.fc6
    (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20070105
    (Red Hat 4.1.1-51)) #1 SMP Mon Mar 19 11:38:26 EDT 2007
    BIOS-provided physical RAM map:
    sanitize start
    sanitize end
    copy_e820_map() start: 0000000000000000 size: 000000000009f000 end:
    000000000009f000 type: 1
    copy_e820_map() type is E820_RAM
    copy_e820_map() start: 000000000009f000 size: 0000000000061000 end:
    0000000000100000 type: 2
    copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end:
    000000001fff0000 type: 1
    copy_e820_map() type is E820_RAM
    copy_e820_map() start: 000000001fff0000 size: 000000000000f000 end:
    000000001ffff000 type: 3
    copy_e820_map() start: 000000001ffff000 size: 0000000000001000 end:
    0000000020000000 type: 4
    copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end:
    0000000100000000 type: 2
    BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    BIOS-e820: 000000000009f000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001ffff000 (ACPI data)
    BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    Using x86 segment limits to approximate NX protection
    Entering add_active_range(0, 0, 131056) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 131056
    HighMem 131056 -> 131056
    early_node_map[1] active PFN ranges
    0: 0 -> 131056
    On node 0 totalpages: 131056
    DMA zone: 40 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4056 pages, LIFO batch:0
    Normal zone: 1239 pages used for memmap
    Normal zone: 125721 pages, LIFO batch:31
    HighMem zone: 0 pages used for memmap
    DMI 2.2 present.
    Using APIC driver default
    ACPI: RSDP (v000 PTLTD ) @ 0x000f7c20
    ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1fffcc46
    ACPI: FADT (v001 ALI M1533 0x06040000 PTL 0x000f4240) @ 0x1fffef64
    ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1fffefd8
    ACPI: DSDT (v001 COMPAL 736 0x06040000 MSFT 0x0100000d) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x8008
    Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
    Detected 850.074 MHz processor.
    Built 1 zonelists. Total pages: 129777
    Kernel command line: ro root=/dev/VolGroup00/LogVol00 nousb ide0=ata66
    ide_setup: ide0=ata66 -- OBSOLETE OPTION, WILL BE REMOVED SOON!
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffd000 (0150c000)
    Enabling fast FPU save and restore... done.
    Initializing CPU#0
    CPU 0 irqstacks, hard=c07aa000 soft=c078a000
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 511544k/524224k available (2188k kernel code, 12068k reserved,
    1157k data, 236k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffc56000 - 0xfffff000 (3748 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
    .init : 0xc074a000 - 0xc0785000 ( 236 kB)
    .data : 0xc0623031 - 0xc0744494 (1157 kB)
    .text : 0xc0400000 - 0xc0623031 (2188 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 1700.86 BogoMIPS
    (lpj=850432)
    Security Framework v1.0.0 initialized
    SELinux: Initializing.
    SELinux: Starting in permissive mode
    selinux_register_security: Registering secondary module capability
    Capability LSM initialized as secondary
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000
    00000000 00000000 00000000
    Enabling disabled K7/SSE Support.
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 64K (64 bytes/line)
    CPU: After all inits, caps: 0383f1ff c1c7f9ff 00000000 00000420 00000000
    00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 12k freed
    ACPI: Core revision 20060707
    ACPI: setting ELCR to 0200 (from 0800)
    CPU0: AMD mobile AMD Duron(tm) Processor stepping 00
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    Brought up 1 CPUs
    sizeof(vma)=84 bytes
    sizeof(page)=40 bytes
    sizeof(inode)=420 bytes
    sizeof(dentry)=144 bytes
    sizeof(ext3inode)=596 bytes
    sizeof(buffer_head)=56 bytes
    sizeof(skbuff)=176 bytes
    sizeof(task_struct)=1408 bytes
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd8b0, last bus=1
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    PCI quirk: region 8000-803f claimed by ali7101 ACPI
    PCI quirk: region 8040-805f claimed by ali7101 SMB
    0000:00:0f.0: cannot adjust BAR0 (not I/O)
    0000:00:0f.0: cannot adjust BAR1 (not I/O)
    0000:00:0f.0: cannot adjust BAR2 (not I/O)
    0000:00:0f.0: cannot adjust BAR3 (not I/O)
    Boot video device is 0000:01:00.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7) *0, disabled.
    ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKU] (IRQs *9)
    ACPI: Power Resource [PFAN] (off)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 11 devices
    usbcore: USB support disabled
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
    report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    pnp: 00:07: ioport range 0x3810-0x381f has been reserved
    pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
    pnp: 00:07: ioport range 0x8000-0x805f could not be reserved
    pnp: 00:07: ioport range 0x4d6-0x4d6 has been reserved
    PCI: Bridge: 0000:00:01.0
    IO window: disabled.
    MEM window: ea100000-efffffff
    PREFETCH window: 40000000-400fffff
    PCI: Bus 2, cardbus bridge: 0000:00:04.0
    IO window: 00002000-000020ff
    IO window: 00002400-000024ff
    PREFETCH window: 30000000-33ffffff
    MEM window: 34000000-37ffffff
    PCI: Bus 6, cardbus bridge: 0000:00:04.1
    IO window: 00002800-000028ff
    IO window: 00002c00-00002cff
    PREFETCH window: 38000000-3bffffff
    MEM window: 3c000000-3fffffff
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKA] -> GSI 11 (level,
    low) -> IRQ 11
    ACPI: PCI Interrupt 0000:00:04.1[A] -> Link [LNKA] -> GSI 11 (level,
    low) -> IRQ 11
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 6, 327680 bytes)
    TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
    TCP: Hash tables configured (established 16384 bind 8192)
    TCP reno registered
    checking if image is initramfs... it is
    Freeing initrd memory: 2134k freed
    Simple Boot Flag at 0x36 set to 0x1
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    audit: initializing netlink socket (disabled)
    audit(1175448888.930:1): initialized
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    SELinux: Registering netfilter hooks
    ksign: Installing public key data
    Loading keyring
    - Added public key A99AD4F3D245F54
    - User ID: Red Hat, Inc. (Kernel Module GPG key)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Limiting direct PCI/PCI transfers.
    Activating ISA DMA hang workarounds.
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    ACPI: Transitioning device [FAN] to D3
    ACPI: Transitioning device [FAN] to D3
    ACPI: Fan [FAN] (off)
    ACPI: CPU0 (power states: C1[C1] C2[C2])
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: Thermal Zone [THRM] (48 C)
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Real Time Clock Driver v1.12ac
    Non-volatile memory driver v1.2
    Linux agpgart interface v0.101 (c) Dave Jones
    agpgart: Detected ALi M1647 chipset
    agpgart: AGP aperture is 64M @ 0xf0000000
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
    input: Macintosh mouse button emulation as /class/input/input0
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ALI15X3: IDE controller at PCI slot 0000:00:0f.0
    ACPI: Unable to derive IRQ for device 0000:00:0f.0
    ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI
    ALI15X3: chipset revision 195
    ALI15X3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio
    Probing IDE interface ide0...
    hda: HITACHI_DK23CA-20, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdc: MATSHITADVD-ROM SR-8175, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    Probing IDE interface ide2...
    Probing IDE interface ide3...
    Probing IDE interface ide4...
    Probing IDE interface ide5...
    hda: max request size: 128KiB
    hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=38760/16/63, UDMA(66)
    hda: cache flushes not supported
    hda: hda1 hda2
    ide-floppy driver 0.99.newide
    Yenta: CardBus bridge found at 0000:00:04.0 [103c:0018]
    Yenta: Enabling burst memory read transactions
    Yenta: Using CSCINT to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:04.0, mfunc 0x009c1b22, devctl 0x66
    Yenta: ISA IRQ mask 0x04b8, PCI irq 11
    Socket status: 30000020
    Yenta: CardBus bridge found at 0000:00:04.1 [103c:0018]
    Yenta: Using CSCINT to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:04.1, mfunc 0x009c1b22, devctl 0x66
    Yenta: ISA IRQ mask 0x04b8, PCI irq 11
    Socket status: 30000006
    PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /class/input/input1
    TCP bic registered
    Initializing XFRM netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
    powernow: SGTC: 10000
    powernow: Minimum speed 300 MHz. Maximum speed 850 MHz.
    powernow-k8: Processor cpuid 670 not supported
    Using IPI No-Shortcut mode
    ACPI: (supports S0 S1 S3 S4 S5)
    Time: tsc clocksource has been installed.
    Freeing unused kernel memory: 236k freed
    Write protecting the kernel read-only data: 841k
    Time: acpi_pm clocksource has been installed.
    pccard: CardBus card inserted into slot 0
    USB Universal Host Controller Interface driver v3.0
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
    dm-devel@redhat.com
    input: PS/2 Generic Mouse as /class/input/input2
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: Disabled at runtime.
    SELinux: Unregistering netfilter hooks
    audit(1175448899.666:2): selinux=0 auid=4294967295
    parport: PnPBIOS parport detected.
    parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
    hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    Linux Tulip driver version 1.1.14 (May 11, 2002)
    PCI: Enabling device 0000:00:10.0 (0010 -> 0013)
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKB] -> GSI 11 (level,
    low) -> IRQ 11
    tulip0: MII transceiver #1 config 3000 status 7849 advertising 01e1.
    eth0: ADMtek Comet rev 17 at MMIO 0xea001000, 00:D0:59:5C:E0:EB, IRQ 11.
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    input: PC Speaker as /class/input/input3
    alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
    alim7101_wdt: Detected old alim7101 revision 'a1d'. If this is a cobalt
    board, set the 'use_gpio' module parameter.
    ath_hal: module license 'Proprietary' taints kernel.
    ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
    alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
    alim7101_wdt: Detected old alim7101 revision 'a1d'. If this is a cobalt
    board, set the 'use_gpio' module parameter.
    wlan: 0.8.4.2 (svn r2246)
    ath_pci: 0.9.4.5 (svn r2246)
    PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
    ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level,
    low) -> IRQ 11
    ath_rate_sample: 1.2 (svn r2246)
    wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
    wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
    24Mbps 36Mbps 48Mbps 54Mbps
    wifi0: H/W encryption support: WEP AES AES_CCM TKIP
    wifi0: mac 7.8 phy 4.5 radio 5.6
    wifi0: Use hw queue 1 for WME_AC_BE traffic
    wifi0: Use hw queue 0 for WME_AC_BK traffic
    wifi0: Use hw queue 2 for WME_AC_VI traffic
    wifi0: Use hw queue 3 for WME_AC_VO traffic
    wifi0: Use hw queue 8 for CAB traffic
    wifi0: Use hw queue 9 for beacons
    wifi0: Atheros 5212: mem=0x34000000, irq=11
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
    PCI: setting IRQ 5 as level-triggered
    ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKC] -> GSI 5 (level, low)
    -> IRQ 5
    cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
    cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x480-0x48f
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
    cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x480-0x48f
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    lp0: using parport0 (interrupt-driven).
    lp0: console ready
    sonypi: Sony Programmable I/O Controller Driver v1.26.
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input4
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input5
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input6
    ACPI: Sleep Button (CM) [SBTN]
    No dock devices found.
    ibm_acpi: IBM ThinkPad ACPI Extras v0.13
    ibm_acpi: http://ibm-acpi.sf.net/
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    EXT3 FS on dm-0, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on hda1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Adding 524280k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
    across:524280k
    Bluetooth: Core ver 2.11
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP ver 2.8
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: HIDP (Human Interface Emulation) ver 1.1
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    Mobile IPv6
    ip_tables: (C) 2000-2006 Netfilter Core Team
    Netfilter messages via NETLINK v0.30.
    nf_conntrack version 0.5.0 (4095 buckets, 32760 max)
    Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin
    is 60 seconds).
    Hangcheck: Using get_cycles().
    ath0: no IPv6 routers present
    eth0: no IPv6 routers present



    --

    "They that give up essential liberty to obtain temporary safety,
    deserve neither liberty nor safety." (Ben Franklin)

    "The course of history shows that as a government grows, liberty
    decreases." (Thomas Jefferson)



    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2007-04-01 20:07    [W:0.089 / U:30.496 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site