[lkml]   [2007]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: [BUG 2.6.21-rc3-git9] SATA NCQ failure with Samsum HD401LJ
    Christian wrote:
    > I've tested multiple kernels (including -mm series) in the range of
    > (before sata_nv adma support went in) up to 2.6.20-rc4.
    > Every NCQ enabled kernel I've tested showed ata errors in dmesg. So I came to
    > the conclusion that my system was faulty. I ran memtest86+ for a long time,
    > but no errors were found. After some fiddling with my HW I discovered that
    > the nforce chipset fan induced some kind of electro magnetic interference to
    > the southbridge, which could clearly be heard as a low frequency noise if I
    > plugged in my speakers to the onboard sound. After replacing the fan, my
    > system is stable again. Now running 2.6.21-rc3-mm2+rsdlv31 without errors.
    > Really strange problem he ;-)

    Man, that's the strangest way to solve ATA command failures I've ever
    heard of. Kudos to you for finding it out. :-)

    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2007-03-21 17:39    [W:0.019 / U:83.484 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site