lkml.org 
[lkml]   [2007]   [Mar]   [18]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
/
DateSun, 18 Mar 2007 14:41:15 +0900
FromTejun Heo <>
SubjectRe: Loading both the pata_atiixp and the ahci driver causes problems
Jon Masters wrote:
> Chuck Ebbert wrote:> >> If you try to load both the pata_atiixp and the ahci driver
>> (for the same ATI SB600 adapter), very strange things happen.
>> The AHCI driver churns for three minutes or so, spewing
>> messages like this, then nothing works:>>>> <6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> <4>ata3.00: qc timeout (cmd 0xec)>> <4>ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104)> >> Shouldn't it be able to tell the device has already been
>> claimed by some other driver?> > One would assume it'd fail to grab the PCI IO ranges twice? I haven't
> looked at the code but I have seen this bug mentioned elsewhere so I
> might well end up having to do that yet :-)

Dunno much about sb600 but ahci and pata_atiixp are probably using
separate IO regions && separate PCI functions.

Conke, care to educate us a bit here?

-- 
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-03-18 06:43    [from the cache]
©2003-2008