lkml.org 
[lkml]   [2007]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 23 of 33] IB/ipath - Improve handling and reporting of parity errors, mostly cleanup
Date
From
# HG changeset patch
# User Bryan O'Sullivan <bos@pathscale.com>
# Date 1173994465 25200
# Node ID 01cde17958018b5262570cd9ea399378f95051e7
# Parent fe719d50378ce70909f96bd5e7bc8e4f28a5031b
IB/ipath - Improve handling and reporting of parity errors, mostly cleanup

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>

diff -r fe719d50378c -r 01cde1795801 drivers/infiniband/hw/ipath/ipath_driver.c
--- a/drivers/infiniband/hw/ipath/ipath_driver.c Thu Mar 15 14:34:25 2007 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c Thu Mar 15 14:34:25 2007 -0700
@@ -605,8 +605,9 @@ static void __devexit cleanup_device(str

ipath_cdbg(VERBOSE, "Free shadow page tid array at %p\n",
dd->ipath_pageshadow);
- vfree(dd->ipath_pageshadow);
+ tmpp = dd->ipath_pageshadow;
dd->ipath_pageshadow = NULL;
+ vfree(tmpp);
}

/*
diff -r fe719d50378c -r 01cde1795801 drivers/infiniband/hw/ipath/ipath_eeprom.c
--- a/drivers/infiniband/hw/ipath/ipath_eeprom.c Thu Mar 15 14:34:25 2007 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_eeprom.c Thu Mar 15 14:34:25 2007 -0700
@@ -626,6 +626,10 @@ void ipath_get_eeprom_info(struct ipath_
} else
memcpy(dd->ipath_serial, ifp->if_serial,
sizeof ifp->if_serial);
+ if (!strstr(ifp->if_comment, "Tested successfully"))
+ ipath_dev_err(dd, "Board SN %s did not pass functional "
+ "test: %s\n", dd->ipath_serial,
+ ifp->if_comment);

ipath_cdbg(VERBOSE, "Initted GUID to %llx from eeprom\n",
(unsigned long long) be64_to_cpu(dd->ipath_guid));
diff -r fe719d50378c -r 01cde1795801 drivers/infiniband/hw/ipath/ipath_iba6110.c
--- a/drivers/infiniband/hw/ipath/ipath_iba6110.c Thu Mar 15 14:34:25 2007 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c Thu Mar 15 14:34:25 2007 -0700
@@ -284,6 +284,14 @@ static const struct ipath_cregs ipath_ht
#define INFINIPATH_EXTS_MEMBIST_ENDTEST 0x0000000000004000
#define INFINIPATH_EXTS_MEMBIST_CORRECT 0x0000000000008000

+
+/* TID entries (memory), HT-only */
+#define INFINIPATH_RT_ADDR_MASK 0xFFFFFFFFFFULL /* 40 bits valid */
+#define INFINIPATH_RT_VALID 0x8000000000000000ULL
+#define INFINIPATH_RT_ADDR_SHIFT 0
+#define INFINIPATH_RT_BUFSIZE_MASK 0x3FFFULL
+#define INFINIPATH_RT_BUFSIZE_SHIFT 48
+
/*
* masks and bits that are different in different chips, or present only
* in one
@@ -402,6 +410,14 @@ static const struct ipath_hwerror_msgs i
INFINIPATH_HWE_MSG(SERDESPLLFAILED, "SerDes PLL"),
};

+#define TXE_PIO_PARITY ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | \
+ INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) \
+ << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)
+#define RXE_EAGER_PARITY (INFINIPATH_HWE_RXEMEMPARITYERR_EAGERTID \
+ << INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT)
+
+static int ipath_ht_txe_recover(struct ipath_devdata *);
+
/**
* ipath_ht_handle_hwerrors - display hardware errors.
* @dd: the infinipath device
@@ -450,13 +466,12 @@ static void ipath_ht_handle_hwerrors(str

/*
* make sure we get this much out, unless told to be quiet,
+ * it's a parity error we may recover from,
* or it's occurred within the last 5 seconds
*/
- if ((hwerrs & ~(dd->ipath_lasthwerror |
- ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
- INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
- << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT))) ||
- (ipath_debug & __IPATH_VERBDBG))
+ if ((hwerrs & ~(dd->ipath_lasthwerror | TXE_PIO_PARITY |
+ RXE_EAGER_PARITY)) ||
+ (ipath_debug & __IPATH_VERBDBG))
dev_info(&dd->pcidev->dev, "Hardware error: hwerr=0x%llx "
"(cleared)\n", (unsigned long long) hwerrs);
dd->ipath_lasthwerror |= hwerrs;
@@ -467,7 +482,7 @@ static void ipath_ht_handle_hwerrors(str
(hwerrs & ~dd->ipath_hwe_bitsextant));

ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control);
- if (ctrl & INFINIPATH_C_FREEZEMODE) {
+ if ((ctrl & INFINIPATH_C_FREEZEMODE) && !ipath_diag_inuse) {
/*
* parity errors in send memory are recoverable,
* just cancel the send (if indicated in * sendbuffererror),
@@ -476,50 +491,14 @@ static void ipath_ht_handle_hwerrors(str
* occur if a processor speculative read is done to the PIO
* buffer while we are sending a packet, for example.
*/
- if (hwerrs & ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
- INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
- << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)) {
- ipath_stats.sps_txeparity++;
- ipath_dbg("Recovering from TXE parity error (%llu), "
- "hwerrstatus=%llx\n",
- (unsigned long long) ipath_stats.sps_txeparity,
- (unsigned long long) hwerrs);
- ipath_disarm_senderrbufs(dd);
- hwerrs &= ~((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
- INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
- << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT);
- if (!hwerrs) { /* else leave in freeze mode */
- ipath_write_kreg(dd,
- dd->ipath_kregs->kr_control,
- dd->ipath_control);
- return;
- }
- }
- if (hwerrs) {
- /*
- * if any set that we aren't ignoring; only
- * make the complaint once, in case it's stuck
- * or recurring, and we get here multiple
- * times.
- */
- if (dd->ipath_flags & IPATH_INITTED) {
- ipath_dev_err(dd, "Fatal Hardware Error (freeze "
- "mode), no longer usable, SN %.16s\n",
- dd->ipath_serial);
- isfatal = 1;
- }
- *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
- /* mark as having had error */
- *dd->ipath_statusp |= IPATH_STATUS_HWERROR;
- /*
- * mark as not usable, at a minimum until driver
- * is reloaded, probably until reboot, since no
- * other reset is possible.
- */
- dd->ipath_flags &= ~IPATH_INITTED;
- } else {
- ipath_dbg("Clearing freezemode on ignored hardware "
- "error\n");
+ if ((hwerrs & TXE_PIO_PARITY) && ipath_ht_txe_recover(dd))
+ hwerrs &= ~TXE_PIO_PARITY;
+ if (hwerrs & RXE_EAGER_PARITY)
+ ipath_dev_err(dd, "RXE parity, Eager TID error is not "
+ "recoverable\n");
+ if (!hwerrs) {
+ ipath_dbg("Clearing freezemode on ignored or "
+ "recovered hardware error\n");
ctrl &= ~INFINIPATH_C_FREEZEMODE;
ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
ctrl);
@@ -587,7 +566,32 @@ static void ipath_ht_handle_hwerrors(str
dd->ipath_hwerrmask);
}

- ipath_dev_err(dd, "%s hardware error\n", msg);
+ if (hwerrs) {
+ /*
+ * if any set that we aren't ignoring; only
+ * make the complaint once, in case it's stuck
+ * or recurring, and we get here multiple
+ * times.
+ */
+ ipath_dev_err(dd, "%s hardware error\n", msg);
+ if (dd->ipath_flags & IPATH_INITTED) {
+ ipath_dev_err(dd, "Fatal Hardware Error (freeze "
+ "mode), no longer usable, SN %.16s\n",
+ dd->ipath_serial);
+ isfatal = 1;
+ }
+ *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
+ /* mark as having had error */
+ *dd->ipath_statusp |= IPATH_STATUS_HWERROR;
+ /*
+ * mark as not usable, at a minimum until driver
+ * is reloaded, probably until reboot, since no
+ * other reset is possible.
+ */
+ dd->ipath_flags &= ~IPATH_INITTED;
+ }
+ else
+ *msg = 0; /* recovered from all of them */
if (isfatal && !ipath_diag_inuse && dd->ipath_freezemsg)
/*
* for status file; if no trailing brace is copied,
@@ -658,7 +662,8 @@ static int ipath_ht_boardname(struct ipa
if (n)
snprintf(name, namelen, "%s", n);

- if (dd->ipath_majrev != 3 || (dd->ipath_minrev < 2 || dd->ipath_minrev > 3)) {
+ if (dd->ipath_majrev != 3 || (dd->ipath_minrev < 2 ||
+ dd->ipath_minrev > 3)) {
/*
* This version of the driver only supports Rev 3.2 and 3.3
*/
@@ -1163,6 +1168,8 @@ static void ipath_ht_init_hwerrors(struc

if (!(extsval & INFINIPATH_EXTS_MEMBIST_ENDTEST))
ipath_dev_err(dd, "MemBIST did not complete!\n");
+ if (extsval & INFINIPATH_EXTS_MEMBIST_CORRECT)
+ ipath_dbg("MemBIST corrected\n");

ipath_check_htlink(dd);

@@ -1366,6 +1373,9 @@ static void ipath_ht_put_tid(struct ipat
u64 __iomem *tidptr, u32 type,
unsigned long pa)
{
+ if (!dd->ipath_kregbase)
+ return;
+
if (pa != dd->ipath_tidinvalid) {
if (unlikely((pa & ~INFINIPATH_RT_ADDR_MASK))) {
dev_info(&dd->pcidev->dev,
@@ -1382,9 +1392,9 @@ static void ipath_ht_put_tid(struct ipat
pa |= lenvalid | INFINIPATH_RT_VALID;
}
}
- if (dd->ipath_kregbase)
- writeq(pa, tidptr);
-}
+ writeq(pa, tidptr);
+}
+

/**
* ipath_ht_clear_tid - clear all TID entries for a port, expected and eager
@@ -1515,7 +1525,7 @@ static int ipath_ht_early_init(struct ip
INFINIPATH_S_ABORT);

ipath_get_eeprom_info(dd);
- if(dd->ipath_boardrev == 5 && dd->ipath_serial[0] == '1' &&
+ if (dd->ipath_boardrev == 5 && dd->ipath_serial[0] == '1' &&
dd->ipath_serial[1] == '2' && dd->ipath_serial[2] == '8') {
/*
* Later production QHT7040 has same changes as QHT7140, so
@@ -1527,6 +1537,24 @@ static int ipath_ht_early_init(struct ip
}
return 0;
}
+
+
+static int ipath_ht_txe_recover(struct ipath_devdata *dd)
+{
+ int cnt = ++ipath_stats.sps_txeparity;
+ if (cnt >= IPATH_MAX_PARITY_ATTEMPTS) {
+ if (cnt == IPATH_MAX_PARITY_ATTEMPTS)
+ ipath_dev_err(dd,
+ "Too many attempts to recover from "
+ "TXE parity, giving up\n");
+ return 0;
+ }
+ dev_info(&dd->pcidev->dev,
+ "Recovering from TXE PIO parity error\n");
+ ipath_disarm_senderrbufs(dd, 1);
+ return 1;
+}
+

/**
* ipath_init_ht_get_base_info - set chip-specific flags for user code
diff -r fe719d50378c -r 01cde1795801 drivers/infiniband/hw/ipath/ipath_iba6120.c
--- a/drivers/infiniband/hw/ipath/ipath_iba6120.c Thu Mar 15 14:34:25 2007 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c Thu Mar 15 14:34:25 2007 -0700
@@ -321,6 +321,12 @@ static const struct ipath_hwerror_msgs i
INFINIPATH_HWE_MSG(SERDESPLLFAILED, "SerDes PLL"),
};

+#define TXE_PIO_PARITY ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | \
+ INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) \
+ << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)
+
+static int ipath_pe_txe_recover(struct ipath_devdata *);
+
/**
* ipath_pe_handle_hwerrors - display hardware errors.
* @dd: the infinipath device
@@ -394,25 +400,8 @@ static void ipath_pe_handle_hwerrors(str
* occur if a processor speculative read is done to the PIO
* buffer while we are sending a packet, for example.
*/
- if (hwerrs & ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
- INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
- << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)) {
- ipath_stats.sps_txeparity++;
- ipath_dbg("Recovering from TXE parity error (%llu), "
- "hwerrstatus=%llx\n",
- (unsigned long long) ipath_stats.sps_txeparity,
- (unsigned long long) hwerrs);
- ipath_disarm_senderrbufs(dd);
- hwerrs &= ~((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
- INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
- << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT);
- if (!hwerrs) { /* else leave in freeze mode */
- ipath_write_kreg(dd,
- dd->ipath_kregs->kr_control,
- dd->ipath_control);
- return;
- }
- }
+ if ((hwerrs & TXE_PIO_PARITY) && ipath_pe_txe_recover(dd))
+ hwerrs &= ~TXE_PIO_PARITY;
if (hwerrs) {
/*
* if any set that we aren't ignoring only make the
@@ -581,6 +570,8 @@ static void ipath_pe_init_hwerrors(struc

if (!(extsval & INFINIPATH_EXTS_MEMBIST_ENDTEST))
ipath_dev_err(dd, "MemBIST did not complete!\n");
+ if (extsval & INFINIPATH_EXTS_MEMBIST_FOUND)
+ ipath_dbg("MemBIST corrected\n");

val = ~0ULL; /* barring bugs, all hwerrors become interrupts, */

@@ -1330,6 +1321,35 @@ static void ipath_pe_free_irq(struct ipa
dd->ipath_irq = 0;
}

+/*
+ * On platforms using this chip, and not having ordered WC stores, we
+ * can get TXE parity errors due to speculative reads to the PIO buffers,
+ * and this, due to a chip bug can result in (many) false parity error
+ * reports. So it's a debug print on those, and an info print on systems
+ * where the speculative reads don't occur.
+ * Because we can get lots of false errors, we have no upper limit
+ * on recovery attempts on those platforms.
+ */
+static int ipath_pe_txe_recover(struct ipath_devdata *dd)
+{
+ if (ipath_unordered_wc())
+ ipath_dbg("Recovering from TXE PIO parity error\n");
+ else {
+ int cnt = ++ipath_stats.sps_txeparity;
+ if (cnt >= IPATH_MAX_PARITY_ATTEMPTS) {
+ if (cnt == IPATH_MAX_PARITY_ATTEMPTS)
+ ipath_dev_err(dd,
+ "Too many attempts to recover from "
+ "TXE parity, giving up\n");
+ return 0;
+ }
+ dev_info(&dd->pcidev->dev,
+ "Recovering from TXE PIO parity error\n");
+ }
+ ipath_disarm_senderrbufs(dd, 1);
+ return 1;
+}
+
/**
* ipath_init_iba6120_funcs - set up the chip-specific function pointers
* @dd: the infinipath device
diff -r fe719d50378c -r 01cde1795801 drivers/infiniband/hw/ipath/ipath_init_chip.c
--- a/drivers/infiniband/hw/ipath/ipath_init_chip.c Thu Mar 15 14:34:25 2007 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c Thu Mar 15 14:34:25 2007 -0700
@@ -590,6 +590,10 @@ static int init_housekeeping(struct ipat
goto done;
}

+
+ /* clear diagctrl register, in case diags were running and crashed */
+ ipath_write_kreg (dd, dd->ipath_kregs->kr_hwdiagctrl, 0);
+
/* clear the initial reset flag, in case first driver load */
ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear,
INFINIPATH_E_RESET);
diff -r fe719d50378c -r 01cde1795801 drivers/infiniband/hw/ipath/ipath_intr.c
--- a/drivers/infiniband/hw/ipath/ipath_intr.c Thu Mar 15 14:34:25 2007 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c Thu Mar 15 14:34:25 2007 -0700
@@ -37,11 +37,40 @@
#include "ipath_verbs.h"
#include "ipath_common.h"

+/*
+ * clear (write) a pio buffer, to clear a parity error. This routine
+ * should only be called when in freeze mode, and the buffer should be
+ * canceled afterwards.
+ */
+static void ipath_clrpiobuf(struct ipath_devdata *dd, u32 pnum)
+{
+ u32 __iomem *pbuf;
+ u32 dwcnt; /* dword count to write */
+ if (pnum < dd->ipath_piobcnt2k) {
+ pbuf = (u32 __iomem *) (dd->ipath_pio2kbase + pnum *
+ dd->ipath_palign);
+ dwcnt = dd->ipath_piosize2k >> 2;
+ }
+ else {
+ pbuf = (u32 __iomem *) (dd->ipath_pio4kbase +
+ (pnum - dd->ipath_piobcnt2k) * dd->ipath_4kalign);
+ dwcnt = dd->ipath_piosize4k >> 2;
+ }
+ dev_info(&dd->pcidev->dev,
+ "Rewrite PIO buffer %u, to recover from parity error\n",
+ pnum);
+ *pbuf = dwcnt+1; /* no flush required, since already in freeze */
+ while(--dwcnt)
+ *pbuf++ = 0;
+}
+
/*
* Called when we might have an error that is specific to a particular
* PIO buffer, and may need to cancel that buffer, so it can be re-used.
+ * If rewrite is true, and bits are set in the sendbufferror registers,
+ * we'll write to the buffer, for error recovery on parity errors.
*/
-void ipath_disarm_senderrbufs(struct ipath_devdata *dd)
+void ipath_disarm_senderrbufs(struct ipath_devdata *dd, int rewrite)
{
u32 piobcnt;
unsigned long sbuf[4];
@@ -74,8 +103,11 @@ void ipath_disarm_senderrbufs(struct ipa
}

for (i = 0; i < piobcnt; i++)
- if (test_bit(i, sbuf))
+ if (test_bit(i, sbuf)) {
+ if (rewrite)
+ ipath_clrpiobuf(dd, i);
ipath_disarm_piobufs(dd, i, 1);
+ }
dd->ipath_lastcancel = jiffies+3; /* no armlaunch for a bit */
}
}
@@ -114,7 +146,7 @@ static u64 handle_e_sum_errs(struct ipat
{
u64 ignore_this_time = 0;

- ipath_disarm_senderrbufs(dd);
+ ipath_disarm_senderrbufs(dd, 0);
if ((errs & E_SUM_LINK_PKTERRS) &&
!(dd->ipath_flags & IPATH_LINKACTIVE)) {
/*
diff -r fe719d50378c -r 01cde1795801 drivers/infiniband/hw/ipath/ipath_kernel.h
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h Thu Mar 15 14:34:25 2007 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h Thu Mar 15 14:34:25 2007 -0700
@@ -590,7 +590,6 @@ void ipath_disable_wc(struct ipath_devda
void ipath_disable_wc(struct ipath_devdata *dd);
int ipath_count_units(int *npresentp, int *nupp, u32 *maxportsp);
void ipath_shutdown_device(struct ipath_devdata *);
-void ipath_disarm_senderrbufs(struct ipath_devdata *);

struct file_operations;
int ipath_cdev_init(int minor, char *name, const struct file_operations *fops,
@@ -713,6 +712,7 @@ void ipath_init_iba6110_funcs(struct ipa
void ipath_init_iba6110_funcs(struct ipath_devdata *);
void ipath_get_eeprom_info(struct ipath_devdata *);
u64 ipath_snap_cntr(struct ipath_devdata *, ipath_creg);
+void ipath_disarm_senderrbufs(struct ipath_devdata *, int);

/*
* number of words used for protocol header if not set by ipath_userinit();
@@ -896,6 +896,8 @@ dma_addr_t ipath_map_single(struct pci_d
#endif

extern unsigned ipath_debug; /* debugging bit mask */
+
+#define IPATH_MAX_PARITY_ATTEMPTS 10000 /* max times to try recovery */

const char *ipath_get_unit_name(int unit);

diff -r fe719d50378c -r 01cde1795801 drivers/infiniband/hw/ipath/ipath_registers.h
--- a/drivers/infiniband/hw/ipath/ipath_registers.h Thu Mar 15 14:34:25 2007 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_registers.h Thu Mar 15 14:34:25 2007 -0700
@@ -308,13 +308,6 @@
#define INFINIPATH_XGXS_RX_POL_SHIFT 19
#define INFINIPATH_XGXS_RX_POL_MASK 0xfULL

-#define INFINIPATH_RT_ADDR_MASK 0xFFFFFFFFFFULL /* 40 bits valid */
-
-/* TID entries (memory), HT-only */
-#define INFINIPATH_RT_VALID 0x8000000000000000ULL
-#define INFINIPATH_RT_ADDR_SHIFT 0
-#define INFINIPATH_RT_BUFSIZE_MASK 0x3FFF
-#define INFINIPATH_RT_BUFSIZE_SHIFT 48

/*
* IPATH_PIO_MAXIBHDR is the max IB header size allowed for in our
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2007-03-15 23:27    [W:0.516 / U:1.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site