lkml.org 
[lkml]   [2007]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: Intel Core Duo/Solo Temperature Monitoring Working On Intel DG965 Motherboard
Hello,

Justin Piszcz wrote:
> DISCLAIMER: This patch is still experimental. AUTHOR: Rudolf Marek has
> written the coretemp module for Intel Core Duo/Solo
> processors.
>
> Without this patch, you cannot monitor your CPU temperature, at least
> not on a DG965 motherboard.
[snip]
> Commentary:
> It will probably be a few weeks until this is incorporated into Linus'
> tree, hopefully it can make it into 2.6.22, then userland support
> should follow over time.
>
I ported this patch to the latest git, I hope this can help to get it
merged.

I'm just wondering if it is right to export the functions msr_read and
msr_write from arch/i386/kernel/msr.c, or if it would be better to put
these functions in arch/i386/lib/msr-on-cpu.c with rdmsr_on_cpu and
wrmsr_on_cpu.

Note the difference between msr_read/msr_write and
rdmsr_on_cpu/wrmsr_on_cpu is that msr_read/msr_write use "safe" rdmsr
/wrmsr functions (i.e. test return value), while
rdmsr_on_cpu/wrmsr_on_cpu does not. Coretemp needs the return value to
work properly.

Best regards,

Nicolas

Intel Core Duo/Solo Temperature Monitoring driver.

Author: Rudolf Marek <r.marek@assembler.cz>
---

Documentation/hwmon/coretemp | 37 ++++
arch/i386/kernel/msr.c | 31 ++-
drivers/hwmon/Kconfig | 9 +
drivers/hwmon/Makefile | 1
drivers/hwmon/coretemp.c | 400 ++++++++++++++++++++++++++++++++++++++++++
include/asm-i386/msr.h | 3
include/asm-x86_64/msr.h | 3
7 files changed, 470 insertions(+), 14 deletions(-)

diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp
new file mode 100644
index 0000000..ba02dee
--- /dev/null
+++ b/Documentation/hwmon/coretemp
@@ -0,0 +1,37 @@
+Kernel driver coretemp
+======================
+
+Supported chips:
+ * All Intel Core family
+ Prefix: 'coretemp'
+ Addresses scanned: CPUID (family 0x6, models 0xe, 0xf)
+ Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
+ Volume 3A: System Programming Guide
+
+Author: Rudolf Marek
+Contact: Rudolf Marek <r.marek@assembler.cz>
+
+Description
+-----------
+
+This driver permits reading temperature sensor embedded inside Intel Core CPU.
+Temperature is measured in degrees Celsius and measurement resolution is
+1 degree C. Valid temperatures are from 0 to TjMax degrees C, because
+the actual temperature is in fact a delta from TjMax.
+
+Temperature known as TjMax is the maximum junction temperature of processor.
+Intel defines this temperature as 85C or 100C. At this temperature, protection
+mechanism will perform actions to forcibly cool down the processor. Alarm
+may be raised, if the temperature grows enough (more than TjMax) to trigger
+the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
+
+temp1_input - Core temperature (in milidegrees of Celsius).
+temp1_crit - Maximum junction temperature (in milidegrees of Celsius).
+temp1_crit_alarm - Set when Out-of-spec bit is set, never clears.
+ Correct CPU operation is no longer guaranteed.
+temp1_label - Contains string with the "Core X", where X is processor
+ number.
+
+The TjMax temperature is set to 85C if undocumented model specific register
+(UMSR) 0xee has bit 30 set. If not the TjMax is 100C as documented in processor
+datasheet. Intel will not disclose this information to individuals.
diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c
index bcaa6e9..c9a8f88 100644
--- a/arch/i386/kernel/msr.c
+++ b/arch/i386/kernel/msr.c
@@ -87,7 +87,7 @@ static void msr_smp_rdmsr(void *cmd_block)
cmd->err = rdmsr_eio(cmd->reg, &cmd->data[0], &cmd->data[1]);
}

-static inline int do_wrmsr(int cpu, u32 reg, u32 eax, u32 edx)
+int msr_write(int cpu, u32 reg, u32 eax, u32 edx)
{
struct msr_command cmd;
int ret;
@@ -107,7 +107,7 @@ static inline int do_wrmsr(int cpu, u32 reg, u32 eax, u32 edx)
return ret;
}

-static inline int do_rdmsr(int cpu, u32 reg, u32 * eax, u32 * edx)
+int msr_read(int cpu, u32 reg, u32 * eax, u32 * edx)
{
struct msr_command cmd;
int ret;
@@ -131,19 +131,22 @@ static inline int do_rdmsr(int cpu, u32 reg, u32 * eax, u32 * edx)

#else /* ! CONFIG_SMP */

-static inline int do_wrmsr(int cpu, u32 reg, u32 eax, u32 edx)
+int msr_write(int cpu, u32 reg, u32 eax, u32 edx)
{
return wrmsr_eio(reg, eax, edx);
}

-static inline int do_rdmsr(int cpu, u32 reg, u32 *eax, u32 *edx)
+int msr_read(int cpu, u32 reg, u32 *eax, u32 *edx)
{
return rdmsr_eio(reg, eax, edx);
}

#endif /* ! CONFIG_SMP */

-static loff_t msr_seek(struct file *file, loff_t offset, int orig)
+EXPORT_SYMBOL_GPL(msr_write);
+EXPORT_SYMBOL_GPL(msr_read);
+
+static loff_t msr_fseek(struct file *file, loff_t offset, int orig)
{
loff_t ret = -EINVAL;

@@ -161,7 +164,7 @@ static loff_t msr_seek(struct file *file, loff_t offset, int orig)
return ret;
}

-static ssize_t msr_read(struct file *file, char __user * buf,
+static ssize_t msr_fread(struct file *file, char __user * buf,
size_t count, loff_t * ppos)
{
u32 __user *tmp = (u32 __user *) buf;
@@ -174,7 +177,7 @@ static ssize_t msr_read(struct file *file, char __user * buf,
return -EINVAL; /* Invalid chunk size */

for (; count; count -= 8) {
- err = do_rdmsr(cpu, reg, &data[0], &data[1]);
+ err = msr_read(cpu, reg, &data[0], &data[1]);
if (err)
return err;
if (copy_to_user(tmp, &data, 8))
@@ -185,7 +188,7 @@ static ssize_t msr_read(struct file *file, char __user * buf,
return ((char __user *)tmp) - buf;
}

-static ssize_t msr_write(struct file *file, const char __user *buf,
+static ssize_t msr_fwrite(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
const u32 __user *tmp = (const u32 __user *)buf;
@@ -200,7 +203,7 @@ static ssize_t msr_write(struct file *file, const char __user *buf,
for (; count; count -= 8) {
if (copy_from_user(&data, tmp, 8))
return -EFAULT;
- err = do_wrmsr(cpu, reg, data[0], data[1]);
+ err = msr_write(cpu, reg, data[0], data[1]);
if (err)
return err;
tmp += 2;
@@ -209,7 +212,7 @@ static ssize_t msr_write(struct file *file, const char __user *buf,
return ((char __user *)tmp) - buf;
}

-static int msr_open(struct inode *inode, struct file *file)
+static int msr_fopen(struct inode *inode, struct file *file)
{
unsigned int cpu = iminor(file->f_path.dentry->d_inode);
struct cpuinfo_x86 *c = &(cpu_data)[cpu];
@@ -227,10 +230,10 @@ static int msr_open(struct inode *inode, struct file *file)
*/
static const struct file_operations msr_fops = {
.owner = THIS_MODULE,
- .llseek = msr_seek,
- .read = msr_read,
- .write = msr_write,
- .open = msr_open,
+ .llseek = msr_fseek,
+ .read = msr_fread,
+ .write = msr_fwrite,
+ .open = msr_fopen,
};

static int msr_device_create(int i)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index c3d4856..707e727 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -167,6 +167,15 @@ config SENSORS_ATXP1
This driver can also be built as a module. If so, the module
will be called atxp1.

+config SENSORS_CORETEMP
+ tristate "Intel Core (2) Duo/Solo temperature sensor"
+ depends on HWMON && X86 && EXPERIMENTAL
+ select X86_MSR
+ help
+ If you say yes here you get support for the temperature
+ sensor inside your CPU. Supported all are all known variants
+ of Intel Core family.
+
config SENSORS_DS1621
tristate "Dallas Semiconductor DS1621 and DS1625"
depends on HWMON && I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 4165c27..0c1cf01 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o
obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o
obj-$(CONFIG_SENSORS_AMS) += ams/
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
+obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
obj-$(CONFIG_SENSORS_FSCHER) += fscher.o
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
new file mode 100644
index 0000000..f139b41
--- /dev/null
+++ b/drivers/hwmon/coretemp.c
@@ -0,0 +1,400 @@
+/*
+ * coretemp.c - Linux kernel module for hardware monitoring
+ *
+ * Copyright (C) 2006 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * Inspired from many hwmon drivers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301 USA.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/hwmon.h>
+#include <linux/sysfs.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+#include <asm/msr.h>
+#include <linux/cpu.h>
+
+#define DRVNAME "coretemp"
+
+typedef enum { SHOW_TEMP, SHOW_TJMAX, SHOW_LABEL, SHOW_NAME } SHOW;
+
+/*
+ * Functions declaration
+ */
+
+static struct coretemp_data *coretemp_update_device(struct device *dev);
+
+struct coretemp_data {
+ struct class_device *class_dev;
+ struct mutex update_lock;
+ const char *name;
+ u32 id;
+ char valid; /* zero until following fields are valid */
+ unsigned long last_updated; /* in jiffies */
+ int temp;
+ int tjmax;
+ /* registers values */
+ u32 therm_status;
+};
+
+static struct coretemp_data *coretemp_update_device(struct device *dev);
+
+/*
+ * Sysfs stuff
+ */
+
+
+static ssize_t show_name(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ int ret;
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct coretemp_data *data = dev_get_drvdata(dev);
+
+ if (attr->index == SHOW_NAME)
+ ret = sprintf(buf, "%s\n", data->name);
+ else /* show label */
+ ret = sprintf(buf, "Core %d\n", data->id);
+ return ret;
+}
+
+static ssize_t show_alarm(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct coretemp_data *data = coretemp_update_device(dev);
+ /* read the Out-of-spec log, never clear */
+ return sprintf(buf, "%d\n", (data->therm_status >> 5) & 1);
+}
+
+static ssize_t show_temp(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct coretemp_data *data = coretemp_update_device(dev);
+ return sprintf(buf, "%d\n",
+ attr->index ==
+ SHOW_TEMP ? data->temp : data->tjmax);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL,
+ SHOW_TEMP);
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp, NULL,
+ SHOW_TJMAX);
+static DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_name, NULL, SHOW_LABEL);
+static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, SHOW_NAME);
+
+static struct attribute *coretemp_attributes[] = {
+ &sensor_dev_attr_name.dev_attr.attr,
+ &sensor_dev_attr_temp1_label.dev_attr.attr,
+ &dev_attr_temp1_crit_alarm.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group coretemp_group = {
+ .attrs = coretemp_attributes,
+};
+
+static struct coretemp_data *coretemp_update_device(struct device *dev)
+{
+ struct coretemp_data *data = dev_get_drvdata(dev);
+
+ mutex_lock(&data->update_lock);
+
+ if (!data->valid || time_after(jiffies, data->last_updated + HZ)) {
+ u32 eax, edx;
+
+ data->valid = 0;
+ msr_read(data->id, MSR_IA32_THERM_STATUS, &eax, &edx);
+ data->therm_status = eax;
+
+ /* update only if data has been valid */
+ if (eax & 0x80000000) {
+ data->temp = data->tjmax - (((data->therm_status >> 16)
+ & 0x7f) * 1000);
+ data->valid = 1;
+ }
+ data->last_updated = jiffies;
+ }
+
+ mutex_unlock(&data->update_lock);
+ return data;
+}
+
+static int __devinit coretemp_probe(struct platform_device *pdev)
+{
+ struct coretemp_data *data;
+ struct cpuinfo_x86 *c = &(cpu_data)[pdev->id];
+ int err;
+ u32 eax, edx;
+
+ if (!(data = kzalloc(sizeof(struct coretemp_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ dev_err(&pdev->dev, "Out of memory\n");
+ goto exit;
+ }
+
+ data->id = pdev->id;
+ data->name = "coretemp";
+ mutex_init(&data->update_lock);
+ /* Tjmax default is 100C */
+ data->tjmax = 100000;
+
+ /* Some processors have Tjmax 85 following magic should detect it */
+ /* family is always 0x6 */
+
+ if (((c->x86_model == 0xf) && (c->x86_mask > 3 )) ||
+ (c->x86_model == 0xe)) {
+
+ err = msr_read(data->id, 0xee, &eax, &edx);
+ if (err) {
+ dev_warn(&pdev->dev,
+ "Unable to access MSR 0xEE, Tjmax left at %d\n",
+ data->tjmax);
+ } else if (eax & 0x40000000) {
+ data->tjmax = 85000;
+ }
+ }
+
+ /* test if we can access the THERM_STATUS MSR */
+ err = msr_read(data->id, MSR_IA32_THERM_STATUS, &eax, &edx);
+
+ if (err) {
+ dev_err(&pdev->dev,
+ "Unable to access THERM_STATUS MSR, giving up\n");
+ goto exit_free;
+ }
+ platform_set_drvdata(pdev, data);
+
+ if ((err = sysfs_create_group(&pdev->dev.kobj, &coretemp_group)))
+ goto exit_free;
+
+ data->class_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->class_dev)) {
+ err = PTR_ERR(data->class_dev);
+ dev_err(&pdev->dev, "Class registration failed (%d)\n",
+ err);
+ goto exit_class;
+ }
+
+ return 0;
+
+exit_class:
+ sysfs_remove_group(&pdev->dev.kobj, &coretemp_group);
+exit_free:
+ kfree(data);
+exit:
+ return err;
+}
+
+static int __devexit coretemp_remove(struct platform_device *pdev)
+{
+ struct coretemp_data *data = platform_get_drvdata(pdev);
+
+ hwmon_device_unregister(data->class_dev);
+ sysfs_remove_group(&pdev->dev.kobj, &coretemp_group);
+ platform_set_drvdata(pdev, NULL);
+ kfree(data);
+ return 0;
+}
+
+static struct platform_driver coretemp_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRVNAME,
+ },
+ .probe = coretemp_probe,
+ .remove = __devexit_p(coretemp_remove),
+};
+
+struct pdev_entry {
+ struct list_head list;
+ struct platform_device *pdev;
+ unsigned int cpu;
+};
+
+static LIST_HEAD(pdev_list);
+static DEFINE_MUTEX(pdev_list_mutex);
+
+static int __cpuinit coretemp_devices_add(unsigned int cpu)
+{
+ int err;
+ struct platform_device *pdev;
+ struct pdev_entry *pdev_entry;
+
+ pdev = platform_device_alloc(DRVNAME, cpu);
+ if (!pdev) {
+ err = -ENOMEM;
+ printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ goto exit;
+
+ }
+
+ pdev_entry = kzalloc(sizeof(struct pdev_entry), GFP_KERNEL);
+
+ if (!pdev_entry) {
+ err = -ENOMEM;
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(pdev);
+
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
+ err);
+ goto exit_device_free;
+ }
+
+ pdev_entry->pdev = pdev;
+ pdev_entry->cpu = cpu;
+ mutex_lock(&pdev_list_mutex);
+ list_add_tail(&pdev_entry->list, &pdev_list);
+ mutex_unlock(&pdev_list_mutex);
+
+ return 0;
+
+exit_device_free:
+ kfree(pdev_entry);
+exit_device_put:
+ platform_device_put(pdev);
+exit:
+ return err;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+void coretemp_devices_remove(unsigned int cpu)
+{
+ struct pdev_entry *p, *n;
+ mutex_lock(&pdev_list_mutex);
+ list_for_each_entry_safe(p, n, &pdev_list, list) {
+ if (p->cpu == cpu) {
+ platform_device_unregister(p->pdev);
+ list_del(&p->list);
+ kfree(p);
+ }
+ }
+ mutex_unlock(&pdev_list_mutex);
+}
+
+static int coretemp_cpu_callback(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned long) hcpu;
+
+ switch (action) {
+ case CPU_ONLINE:
+ coretemp_devices_add(cpu);
+ break;
+ case CPU_DEAD:
+ coretemp_devices_remove(cpu);
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata coretemp_cpu_notifier = {
+ .notifier_call = coretemp_cpu_callback,
+};
+#endif /* !CONFIG_HOTPLUG_CPU */
+
+static int __init coretemp_init(void)
+{
+ int i, err = -ENODEV;
+ struct pdev_entry *p, *n;
+
+ if (current_cpu_data.x86_vendor != X86_VENDOR_INTEL)
+ goto exit;
+
+ err = platform_driver_register(&coretemp_driver);
+ if (err)
+ goto exit;
+
+ for_each_online_cpu(i) {
+ struct cpuinfo_x86 *c = &(cpu_data)[i];
+
+ /* check if family 6, models e, f */
+ if ((c->cpuid_level < 0) || (c->x86 != 0x6) ||
+ !((c->x86_model == 0xe) || (c->x86_model == 0xf))) {
+
+ /* supported CPU not found, but report the unknown
+ family 6 CPU */
+ if ((c->x86 == 0x6) && (c->x86_model > 0xf))
+ printk(KERN_WARNING DRVNAME ": Unknown CPU, please"
+ " report to the lm-sensors@lm-sensors.org\n");
+ continue;
+ }
+
+ err = coretemp_devices_add(i);
+ if (err)
+ goto exit_driver;
+ }
+ if (list_empty(&pdev_list)) {
+ err = -ENODEV;
+ goto exit_driver_unreg;
+ }
+
+#ifdef CONFIG_HOTPLUG_CPU
+ register_hotcpu_notifier(&coretemp_cpu_notifier);
+#endif
+ return 0;
+
+exit_driver:
+ mutex_lock(&pdev_list_mutex);
+ list_for_each_entry_safe(p, n, &pdev_list, list) {
+ platform_device_unregister(p->pdev);
+ list_del(&p->list);
+ kfree(p);
+ }
+ mutex_unlock(&pdev_list_mutex);
+exit_driver_unreg:
+ platform_driver_unregister(&coretemp_driver);
+exit:
+ return err;
+}
+
+static void __exit coretemp_exit(void)
+{
+ struct pdev_entry *p, *n;
+#ifdef CONFIG_HOTPLUG_CPU
+ unregister_hotcpu_notifier(&coretemp_cpu_notifier);
+#endif
+ mutex_lock(&pdev_list_mutex);
+ list_for_each_entry_safe(p, n, &pdev_list, list) {
+ platform_device_unregister(p->pdev);
+ list_del(&p->list);
+ kfree(p);
+ }
+ mutex_unlock(&pdev_list_mutex);
+ platform_driver_unregister(&coretemp_driver);
+}
+
+MODULE_AUTHOR("Rudolf Marek <r.marek@assembler.cz>");
+MODULE_DESCRIPTION("Intel Core temperature monitor");
+MODULE_LICENSE("GPL");
+
+module_init(coretemp_init)
+module_exit(coretemp_exit)
diff --git a/include/asm-i386/msr.h b/include/asm-i386/msr.h
index ec3b680..ff73a99 100644
--- a/include/asm-i386/msr.h
+++ b/include/asm-i386/msr.h
@@ -97,6 +97,9 @@ static inline void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
}
#endif /* CONFIG_SMP */

+int msr_write(int cpu, u32 reg, u32 eax, u32 edx);
+int msr_read(int cpu, u32 reg, u32 *eax, u32 *edx);
+
/* symbolic names for some interesting MSRs */
/* Intel defined MSRs. */
#define MSR_IA32_P5_MC_ADDR 0
diff --git a/include/asm-x86_64/msr.h b/include/asm-x86_64/msr.h
index 902f9a5..90662f4 100644
--- a/include/asm-x86_64/msr.h
+++ b/include/asm-x86_64/msr.h
@@ -160,6 +160,9 @@ static inline unsigned int cpuid_edx(unsigned int op)
#define MSR_IA32_UCODE_WRITE 0x79
#define MSR_IA32_UCODE_REV 0x8b

+int msr_write(int cpu, u32 reg, u32 eax, u32 edx);
+int msr_read(int cpu, u32 reg, u32 *eax, u32 *edx);
+
#ifdef CONFIG_SMP
void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-03-15 12:43    [W:0.103 / U:1.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site