lkml.org 
[lkml]   [2007]   [Feb]   [24]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
DateSat, 24 Feb 2007 11:22:23 +0000
FromSimon Arlott <>
Subject[PATCH] usbatm: Create sysfs link "device" from atm class device to usb interface.
There is currently no path from the ATM device in /sys to the USB device's interface that the driver is using; this patch creates a "device" symlink. It is then possible to get to the cxacru ADSL statistics (http://lkml.org/lkml/2007/2/23/328):

/sys/class/atm/cxacru0/device $ ls *_rate *_margin *_attenuation
downstream_attenuation  downstream_snr_margin  upstream_rate
downstream_rate         upstream_attenuation   upstream_snr_margin

If this link is not appropriate I'd have to create device files in /sys/class/atm/cxacru0 instead - which seems less appropriate since the ADSL statistics are for the USB device not ATM (which is running over the ADSL).

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
---
 drivers/usb/atm/usbatm.c |   12 +++++++++++-
 1 files changed, 11 insertions(+), 1 deletions(-)
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index d91ed11..d0f1976 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -969,6 +969,12 @@ static int usbatm_atm_init(struct usbatm
 	/* temp init ATM device, set to 128kbit */
 	atm_dev->link_rate = 128 * 1000 / 424;
 
+	ret = sysfs_create_link(&atm_dev->class_dev.kobj, &instance->usb_intf->dev.kobj, "device");
+	if (ret) {
+		atm_err(instance, "%s: sysfs_create_link failed: %d\n", __func__, ret);
+		goto fail_sysfs;
+	}
+
 	if (instance->driver->atm_start && ((ret = instance->driver->atm_start(instance, atm_dev)) < 0)) {
 		atm_err(instance, "%s: atm_start failed: %d!\n", __func__, ret);
 		goto fail;
@@ -987,6 +993,8 @@ static int usbatm_atm_init(struct usbatm
 	return 0;
 
  fail:
+	sysfs_remove_link(&atm_dev->class_dev.kobj, "device");
+ fail_sysfs:
 	instance->atm_dev = NULL;
 	atm_dev_deregister(atm_dev); /* usbatm_atm_dev_close will eventually be called */
 	return ret;
@@ -1319,8 +1327,10 @@ void usbatm_usb_disconnect(struct usb_in
 	kfree(instance->cell_buf);
 
 	/* ATM finalize */
-	if (instance->atm_dev)
+	if (instance->atm_dev) {
+		sysfs_remove_link(&instance->atm_dev->class_dev.kobj, "device");
 		atm_dev_deregister(instance->atm_dev);
+	}
 
 	usbatm_put_instance(instance);	/* taken in usbatm_usb_probe */
 }
-- 
1.4.3.1

-- 
Simon Arlott

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2007-02-24 11:25    [W:0.313 / U:0.000 seconds]
©2003-2008 Jasper Spaans