lkml.org 
[lkml]   [2007]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: PCI riser cards and PCI irq routing, etc
Krzysztof Halasa wrote:
> Udo van den Heuvel <udovdh@xs4all.nl> writes:
>
>> At the bottom I added a dmesg output of the kernel after boot.
>> I more or less know that irq 20 for the DVB-S card (saa7146 (1)) is
>> 'working'. I know that irq 16 for saa7146 (0) (DVB-T) is not working for
>> i2c although the card does work perfectly for DVB-T reception (picture,
>> low CPU load, etc) with only reception as the bottleneck.
>
> BTW: Can you check which device # and IRQ does the card get if plugged
> directly into the PCI slot on board (without the riser)?

DN is 20 I believe (from the tranquilPC doc).
irq I'd have to check.

> Is it a VIA ITX board? I think I have VIA's riser card somewhere,
> could check what it does.

Yes, VIA Epia EN12000.
Interesting to check the riser card.

Udo
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-02-20 05:19    [W:0.095 / U:0.764 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site