lkml.org 
[lkml]   [2007]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Why can't I build a running Kernel?
2007/2/9, Jiri Slaby <jirislaby@gmail.com>:
> Reg Clemens napsal(a):
> > Why can't I build a running Kernel?
> > I have in the past, but since some time in the 2.6.19 series,
> > I have got the following series of errors.
> > Same thing now with 2.6.20.
> >
> > I build with:
> >
> > make xconfig
> >
> > changing only the Processor type to Pentium4,
> > then I
> >
> > make bzImage
> > make modules
> > make modules_install
> > make install
> >
> > Fine everything builds, no errors.
> > I then try booting, and I get 4 or 5 lines and then
> >
> > Unable to access resume device (/dev/sda5)
> > mount: could not find filesystem '/dev/root'
> > < 4 more lines with setuproot and switchroot >
> >
> > and then
> >
> > Kernel panic - not syncing: Attempting to kill init!
> >
> > Sigh.
> > What has changed, what do I need to do to get this thing to boot?
>
I have the same problem with 2.6.19 and later. The previous kernel with
same .config works, but it's not true for 2.6.19 and 2.6.30.




> Re-enable sata/scsi/usb/whatever is your root behind stuff back again? What
> does
> your .config look like?
>
> regards,

I selected everything about ATA to <*> or <M>, and made initrd for the
newly-built kernel, still unable to boot.

The .config was attached, I have kdb-4.4 patched.

Thanks and Regards,
albcamus <albcamus@gmail.com>
[unhandled content-type:application/octet-stream]
\
 
 \ /
  Last update: 2007-02-12 09:39    [W:0.047 / U:22.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site