lkml.org 
[lkml]   [2007]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: SATA-performance: Linux vs. FreeBSD
Date
System Details:

dmesg: (parts)

Bootdata ok (command line is root=/dev/sda7 vga=0x31a resume=/dev/sda5
splash=silent)
Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2
20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
...
Using ACPI (MADT) for SMP configuration information
...
Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
Brought up 2 CPUs
...
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Processor [CPU2] (supports 8 throttling states)
...
ICH7: IDE controller at PCI slot 0000:00:1f.1
GSI 18 sharing vector 0xD9 and IRQ 18
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 217
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: HL-DT-STDVD-RAM GSA-H22N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
libata version 2.00 loaded.
ahci 0000:00:1f.2: version 2.0
GSI 19 sharing vector 0xE1 and IRQ 19
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
ata1: SATA max UDMA/133 cmd 0xFFFFC20000026D00 ctl 0x0 bmdma 0x0 irq 233
ata2: SATA max UDMA/133 cmd 0xFFFFC20000026D80 ctl 0x0 bmdma 0x0 irq 233
ata3: SATA max UDMA/133 cmd 0xFFFFC20000026E00 ctl 0x0 bmdma 0x0 irq 233
ata4: SATA max UDMA/133 cmd 0xFFFFC20000026E80 ctl 0x0 bmdma 0x0 irq 233
scsi0 : ahci
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 31/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link down (SStatus 0 SControl 300)
scsi2 : ahci
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-6, max UDMA/100, 57337056 sectors: LBA
ata3.00: ata3: dev 0 multi count 1
ata3.00: applying bridge limits
ata3.00: configured for UDMA/100
scsi3 : ahci
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 31/32)
ata4.00: ata4: dev 0 multi count 16
ata4.00: configured for UDMA/133
Vendor: ATA Model: ST380811AS Rev: 3.AA
Losing some ticks... checking if CPU frequency changed.
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sda2: <bsd: sda9 sda10 sda11 sda12 sda13 >
sd 0:0:0:0: Attached scsi disk sda
Vendor: ATA Model: Adtron A25FB-28G Rev: BF22
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 57337056 512-byte hdwr sectors (29357 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write through
SCSI device sdb: 57337056 512-byte hdwr sectors (29357 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write through
sdb: sdb1
sd 2:0:0:0: Attached scsi disk sdb
Vendor: ATA Model: ST3250820AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
sdc:
sd 3:0:0:0: Attached scsi disk sdc
sd 3:0:0:0: Attached scsi generic sg2 type 0
...


strace output:

% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
73.73 49.904049 1947 25627 write
25.66 17.365062 694602 25 fsync
0.62 0.416500 59500 7 close
0.00 0.000000 0 4 read
0.00 0.000000 0 7 open
0.00 0.000000 0 5 fstat
0.00 0.000000 0 16 mmap
0.00 0.000000 0 7 mprotect
0.00 0.000000 0 1 munmap
0.00 0.000000 0 3 brk
0.00 0.000000 0 1 1 access
0.00 0.000000 0 1 execve
0.00 0.000000 0 1 uname
0.00 0.000000 0 1 arch_prctl
0.00 0.000000 0 4 fadvise64
------ ----------- ----------- --------- --------- ----------------
100.00 67.685611 25710 1 total

as result of $> strace -c -T -o trace.out PTestY

PTestY run for 12.5 min = 752 seconds
Thus it stuck somewhere in the system for around 690 seconds !!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-02-12 18:45    [W:3.641 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site