lkml.org 
[lkml]   [2007]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [BUG] PATA_PCMCIA does not work
On 2/11/07, Alan <alan@lxorguk.ukuu.org.uk> wrote:
> > [pata_pcmcia dmesg]
> > ata1.00: CFA, max PIO0, 20480 sectors: LBA
> > ata1.00: ata1: dev 0 multi count 0
> > ata1.01: CFA, max PIO0, 20480 sectors: LBA
> > ata1.01: ata1: dev 1 multi count 0
>
> Do you have two cards here ?

I've seen this as well, on an ancient 4MB card. I'm pretty sure the
-CSEL signal on my test board is incorrectly routed, so I thought it
was because of that. I'll try to strap it tomorrow and see if it
really is the cause of the problem.

> Your card should work with the current -mm driver although not entirely
> for the right reasons. Given you have such a marvellously buggy set of
> hardware can I send you some test patches to try ?

In my current pile of four CF cards, it looks like three of them are
buggy, although in slightly different ways. I'd be happy to test a few
patches.

Haavard
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-02-11 11:35    [W:0.155 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site