lkml.org 
[lkml]   [2007]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6.16.16 Lost CD-ROM Drive
Brian D. McGrew wrote:
>> What am I missing to get the 2.6.16.16 kernel to see a SATA CD-ROM
> drive
>> in normal, non-legacy move?
>
> Try booting 2.6.16 with the following options:
>
> libata.atapi_enabled=1 ide0=noprobe ide1=noprobe
> -----
>
> Still no go. /dev/sda* is created for the hard drive but no CD-ROM and
> the same ATAPI error in dmesg.

If libata is built as a module, putting libata.atapi_enabled=1 on the
kernel command line won't work. In that case, try putting

options libata atapi_enabled=1

in /etc/modprobe.conf. Of course if libata is being loaded from the
initrd that may not work, in which case the easiest solution is likely
to just build it into the kernel so that the kernel command line method
will work.

--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-02-02 00:47    [W:0.024 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site