lkml.org 
[lkml]   [2007]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: 2.6.24-rc4-git5: Reported regressions from 2.6.23
    Hi,

    On Sat, Dec 08, 2007 at 01:36:31AM -0800, Andrew Morton wrote:
    > > Subject : PATA scan: ACPI Exception AE_AML_PACKAGE_LIMIT... is beyond end of object
    > > Submitter : Hans de Bruin <bruinjm@xs4all.nl>
    > > References : http://bugzilla.kernel.org/show_bug.cgi?id=9320
    > > Handled-By : Robert Moore <Robert.Moore@intel.com>
    > > Tejun Heo <htejun@gmail.com>
    > > Fu Michael <michael.fu@intel.com>
    > > Patch :
    > >
    >
    > A number of other people are seeing the same thing and Tejun is putting in
    > a blacklist of machines which cannot use libata+acpi. That patch is not
    > yet in any git tree which I pull.
    >
    > AFACIT the machines kepe working OK - there's just some nasty dmesg spew.
    >
    > If any machines _are_ breaking then this could cause real problems and I'd
    > prefer that we either go for a whitelist or arrange to detect the condition
    > and fall back to non-acpi ata.

    Does this report now win me the lucky draw, pretty please? ;)

    STD regression rc1 -> rc234, suspend fails completely, recovering is
    pretty much useless since HDD is DEAD from this point on anyway.
    Managed to capture -rc2 suspend logging via still-alive ssh session.

    2.6.24-rc1 suspend/resume log, successful (well, a couple seconds delay, most likely due to
    well-recovered AML failure):

    swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
    swsusp: Basic memory bitmaps created
    Syncing filesystems ... done.
    Freezing user space processes ... (elapsed 0.00 seconds) done.
    Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
    Shrinking memory... done (0 pages freed)
    Freed 0 kbytes in 0.02 seconds (0.00 MB/s)
    Suspending console(s)
    hub 4-0:1.0: hub_suspend
    usb usb4: bus suspend
    ehci_hcd 0000:00:10.3: suspend root hub
    hub 3-0:1.0: hub_suspend
    usb usb3: bus suspend
    usb usb3: suspend_rh
    hub 2-0:1.0: hub_suspend
    usb usb2: bus suspend
    usb usb2: suspend_rh
    hub 1-0:1.0: hub_suspend
    usb usb1: bus suspend
    usb usb1: suspend_rh
    sd 0:0:0:0: [sda] Synchronizing SCSI cache
    parport_pc 00:09: disabled
    serial 00:08: disabled
    serial 00:07: disabled
    ACPI: PCI interrupt for device 0000:00:11.5 disabled
    ACPI handle has no context!
    ACPI: PCI interrupt for device 0000:00:11.1 disabled
    ACPI: PCI interrupt for device 0000:00:10.3 disabled
    ehci_hcd 0000:00:10.3: --> PCI D3/wakeup
    uhci_hcd 0000:00:10.2: uhci_suspend
    ACPI: PCI interrupt for device 0000:00:10.2 disabled
    uhci_hcd 0000:00:10.2: --> PCI D3
    uhci_hcd 0000:00:10.1: uhci_suspend
    ACPI: PCI interrupt for device 0000:00:10.1 disabled
    uhci_hcd 0000:00:10.1: --> PCI D3
    uhci_hcd 0000:00:10.0: uhci_suspend
    ACPI: PCI interrupt for device 0000:00:10.0 disabled
    uhci_hcd 0000:00:10.0: --> PCI D3
    ACPI: PCI interrupt for device 0000:00:0d.0 disabled
    ACPI handle has no context!
    ACPI: PCI interrupt for device 0000:00:0c.0 disabled
    ACPI handle has no context!
    pci_set_power_state(): 0000:00:00.0: state=3, current state=5
    swsusp: critical section:
    swsusp: Need to copy 51195 pages
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    evxfevnt-0079 [00] enable : System is already in ACPI mode
    ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
    ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
    ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
    ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
    evxfevnt-0079 [00] enable : System is already in ACPI mode
    ACPI: Unable to turn cooling device [c180ff60] 'off'
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[db140000-db1407ff] Max Packet=[2048] IR/IT contexts=[4/8]
    ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
    e100: eth-intel: e100_watchdog: link up, 100Mbps, full-duplex
    PM: Writing back config space on device 0000:00:0d.0 at offset 1 (was 2100007, writing 2100003)
    ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 22
    uhci_hcd 0000:00:10.0: PCI D0, from previous PCI D3
    ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 20
    uhci_hcd 0000:00:10.0: uhci_resume
    uhci_hcd 0000:00:10.0: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:10.0: Performing full reset
    usb usb1: root hub lost power or was reset
    usb usb1: suspend_rh
    uhci_hcd 0000:00:10.1: PCI D0, from previous PCI D3
    ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 20
    uhci_hcd 0000:00:10.1: uhci_resume
    uhci_hcd 0000:00:10.1: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:10.1: Performing full reset
    usb usb2: root hub lost power or was reset
    usb usb2: suspend_rh
    uhci_hcd 0000:00:10.2: PCI D0, from previous PCI D3
    ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 20
    uhci_hcd 0000:00:10.2: uhci_resume
    uhci_hcd 0000:00:10.2: uhci_check_and_reset_hc: cmd = 0x0000
    uhci_hcd 0000:00:10.2: Performing full reset
    usb usb3: root hub lost power or was reset
    usb usb3: suspend_rh
    ehci_hcd 0000:00:10.3: PCI D0, from previous PCI D3
    ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 20
    PM: Writing back config space on device 0000:00:10.3 at offset 3 (was 2008, writing 2010)
    PM: Writing back config space on device 0000:00:10.3 at offset 1 (was 2100007, writing 2100017)
    PM: Writing back config space on device 0000:00:11.1 at offset 1 (was 2900003, writing 2900007)
    ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 17
    ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:11.5 to 64
    ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    serial 00:07: activated
    serial 00:08: activated
    parport_pc 00:09: activated
    i8042 aux 00:0a: activation failed
    i8042 kbd 00:0b: activation failed
    sd 0:0:0:0: [sda] Starting disk
    ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFF) is beyond end of object [20070126]
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.GTF_] (Node c180b990), AE_AML_PACKAGE_LIMIT
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV1._GTF] (Node c180b888), AE_AML_PACKAGE_LIMIT
    ata1.01: _GTF evaluation failed (AE 0x300d)
    ata1.01: revalidation failed (errno=-5)
    ata1: failed to recover some devices, retrying in 5 secs
    ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFF) is beyond end of object [20070126]
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.GTF_] (Node c180b990), AE_AML_PACKAGE_LIMIT
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV1._GTF] (Node c180b888), AE_AML_PACKAGE_LIMIT
    ata1.01: _GTF evaluation failed (AE 0x300d)
    ata1.01: ACPI on devcfg failed the second time, disabling (errno=-5)
    ata1.01: revalidation failed (errno=1)
    ata1: failed to recover some devices, retrying in 5 secs
    ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFF) is beyond end of object [20070126]
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.GTF_] (Node c180b990), AE_AML_PACKAGE_LIMIT
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c180b840), AE_AML_PACKAGE_LIMIT
    ata1.00: _GTF evaluation failed (AE 0x300d)
    ata1.00: revalidation failed (errno=-5)
    ata1: failed to recover some devices, retrying in 5 secs
    ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFF) is beyond end of object [20070126]
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.GTF_] (Node c180b990), AE_AML_PACKAGE_LIMIT
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c180b840), AE_AML_PACKAGE_LIMIT
    ata1.00: _GTF evaluation failed (AE 0x300d)
    ata1.00: ACPI on devcfg failed the second time, disabling (errno=-5)
    ata1.00: revalidation failed (errno=1)
    ata1: failed to recover some devices, retrying in 5 secs
    ata1.00: configured for UDMA/100
    ata1.01: configured for UDMA/33
    sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    usb usb1: usb resume
    usb usb1: wakeup_rh
    hub 1-0:1.0: trying to enable port power on non-switchable hub
    usb usb2: usb resume
    usb usb2: wakeup_rh
    hub 2-0:1.0: trying to enable port power on non-switchable hub
    usb usb3: usb resume
    usb usb3: wakeup_rh
    hub 3-0:1.0: trying to enable port power on non-switchable hub
    usb usb4: usb resume
    ehci_hcd 0000:00:10.3: resume root hub
    hub 4-0:1.0: hub_resume
    Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0006
    uhci_hcd 0000:00:10.0: port 1 portsc 018a,00
    hub 1-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s
    done.
    swsusp: Basic memory bitmaps freed
    hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300
    uhci_hcd 0000:00:10.0: port 2 portsc 008a,00
    hub 1-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
    hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
    hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0006
    uhci_hcd 0000:00:10.1: port 1 portsc 018a,00
    hub 2-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s
    hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300
    uhci_hcd 0000:00:10.1: port 2 portsc 008a,00
    hub 2-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
    hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
    hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0006
    uhci_hcd 0000:00:10.2: port 1 portsc 008a,00
    hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
    hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
    uhci_hcd 0000:00:10.2: port 2 portsc 008a,00
    hub 3-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
    hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
    hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000
    hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
    hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
    hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
    usb usb1: suspend_rh (auto-stop)
    usb usb2: suspend_rh (auto-stop)
    usb usb3: suspend_rh (auto-stop)
    agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
    agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
    agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
    [drm] Loading R200 Microcode



    2.6.24-rc2 suspend log (one screenful), UNSUCCESSFUL:

    serial 00:07: disabled
    ACPI: PCI interrupt for device 0000:00:11.5 disabled
    ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFF) is beyond end of object [20070126]
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.GTM_]
    (Node c180b9a8), AE_AML_PACKAGE_LIMIT
    ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1._GTM] (Node c180b8d0), AE_AML_PACKAGE_LIMIT
    ata2: ACPI get timing mode failed (AE 0x300d)
    pci_device_suspend(): ata_pci_device_suspend+0x0/0x40() returns -22
    suspend_device(): pci_device_suspend+0x0/0x70() returns -22
    Could not suspend device 0000:00:11.1: error -22
    ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 23
    ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    serial 00:07: activated
    serial 00:08: activated
    parport_pc 00:09: activated
    i8042 aux 00:0a: activation failed
    i8042 kbd 00:0b: activation failed
    sd 0:0:0:0: [sda] Starting disk
    sd 0:0:0:0: timing out command, waited 180s
    sd 0:0:0:0: [sda] START_STOP FAILED
    sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
    Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
    done.
    swsusp: Basic memory bitmaps freed
    swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
    swsusp: Basic memory bitmaps created
    Syncing filesystems ...



    # lspci
    00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
    00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
    00:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
    00:0a.0 Multimedia audio controller: Aureal Semiconductor Vortex 2 (rev fe)
    00:0c.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 08)
    00:0d.0 Multimedia audio controller: Aztech System Ltd 3328 Audio (rev 10)
    00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
    00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
    00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
    00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
    00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
    00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
    00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
    00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
    01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 If [Radeon 9000] (rev 01)
    01:00.1 Display controller: ATI Technologies Inc Radeon RV250 [Radeon 9000] (Secondary) (rev 01)


    # dmidecode 2.9
    SMBIOS 2.2 present.
    39 structures occupying 1035 bytes.
    Table at 0x000F0800.

    Handle 0x0000, DMI type 0, 19 bytes
    BIOS Information
    Vendor: Award Software International, Inc.
    Version: 6.00 PG
    Release Date: 09/16/2003
    Address: 0xE0000
    Runtime Size: 128 kB
    ROM Size: 512 kB
    Characteristics:
    ISA is supported
    PCI is supported
    PNP is supported
    APM is supported
    BIOS is upgradeable
    BIOS shadowing is allowed
    ESCD support is available
    Boot from CD is supported
    Selectable boot is supported
    BIOS ROM is socketed
    EDD is supported
    5.25"/360 KB floppy services are supported (int 13h)
    5.25"/1.2 MB floppy services are supported (int 13h)
    3.5"/720 KB floppy services are supported (int 13h)
    3.5"/2.88 MB floppy services are supported (int 13h)
    Print screen service is supported (int 5h)
    8042 keyboard services are supported (int 9h)
    Serial services are supported (int 14h)
    Printer services are supported (int 17h)
    CGA/mono video services are supported (int 10h)
    ACPI is supported
    USB legacy is supported
    AGP is supported
    LS-120 boot is supported
    ATAPI Zip drive boot is supported

    Handle 0x0001, DMI type 1, 25 bytes
    System Information
    Manufacturer: VIA Technologies, Inc.
    Product Name: VT8367-8235
    Version:
    Serial Number:
    UUID: Not Present
    Wake-up Type: Power Switch

    Handle 0x0002, DMI type 2, 8 bytes
    Base Board Information
    Manufacturer:
    Product Name: VT8367-8235
    Version:
    Serial Number:

    Handle 0x0003, DMI type 3, 13 bytes
    Chassis Information
    Manufacturer:
    Type: Desktop
    Lock: Not Present
    Version:
    Serial Number:
    Asset Tag:
    Boot-up State: Unknown
    Power Supply State: Unknown
    Thermal State: Unknown
    Security Status: Unknown

    Handle 0x0004, DMI type 4, 32 bytes
    Processor Information
    Socket Designation: Socket A
    Type: Central Processor
    Family: Duron
    Manufacturer: AMD
    ID: 81 06 00 00 FF FB 83 03
    Signature: Family 6, Model 8, Stepping 1
    Flags:
    FPU (Floating-point unit on-chip)
    VME (Virtual mode extension)
    DE (Debugging extension)
    PSE (Page size extension)
    TSC (Time stamp counter)
    MSR (Model specific registers)
    PAE (Physical address extension)
    MCE (Machine check exception)
    CX8 (CMPXCHG8 instruction supported)
    APIC (On-chip APIC hardware supported)
    SEP (Fast system call)
    MTRR (Memory type range registers)
    PGE (Page global enable)
    MCA (Machine check architecture)
    CMOV (Conditional move instruction supported)
    PAT (Page attribute table)
    PSE-36 (36-bit page size extension)
    MMX (MMX technology supported)
    FXSR (Fast floating-point save and restore)
    SSE (Streaming SIMD extensions)
    Version: AMD K7 processor
    Voltage: 3.3 V
    External Clock: 133 MHz
    Max Speed: 1500 MHz
    Current Speed: 1200 MHz
    Status: Populated, Enabled
    Upgrade: ZIF Socket
    L1 Cache Handle: 0x000A
    L2 Cache Handle: 0x000B
    L3 Cache Handle: No L3 Cache

    Handle 0x0005, DMI type 5, 24 bytes
    Memory Controller Information
    Error Detecting Method: None
    Error Correcting Capabilities:
    None
    Supported Interleave: One-way Interleave
    Current Interleave: Four-way Interleave
    Maximum Memory Module Size: 32 MB
    Maximum Total Memory Size: 128 MB
    Supported Speeds:
    70 ns
    60 ns
    Supported Memory Types:
    Standard
    EDO
    Memory Module Voltage: 5.0 V
    Associated Memory Slots: 4
    0x0006
    0x0007
    0x0008
    0x0009
    Enabled Error Correcting Capabilities: None

    .
    .
    .


    # hdparm -i /dev/sda

    /dev/sda:

    Model=WDC WD1200JB-00CRA1 , FwRev=17.07W17, SerialNo=WD-WCA8C4285629
    Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
    RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=40
    BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=?16?
    CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=234441648
    IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
    PIO modes: pio0 pio1 pio2 pio3 pio4
    DMA modes: mdma0 mdma1 mdma2
    UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
    AdvancedPM=no WriteCache=enabled
    Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5

    * signifies the current active mode



    Athlon on EPOX 8K5A2+ board.



    Again, 2.6.23 and 2.6.24-rc1 work, yet 2.6.24 -rc2, -rc3 and -rc4 FAIL.

    Probably won't be able to do any reporting over the weekend (WOL is
    inoperable ATM for some weird reason), let me know what you need.
    Took too much time to gather this report already anyway ;)

    Thanks,

    Andreas Mohr


    \
     
     \ /
      Last update: 2007-12-08 11:15    [W:0.046 / U:152.512 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site