Messages in this thread | | | From | Carlos Corbacho <> | Subject | Re: x86: Increase PCIBIOS_MIN_IO to 0x1500 to fix nForce 4 suspend-to-RAM | Date | Mon, 24 Dec 2007 21:53:47 +0000 |
| |
On Monday 24 December 2007 18:34:21 Linus Torvalds wrote: > On Mon, 24 Dec 2007, Rafael J. Wysocki wrote: > > Well, having considered that for a longer while, I think the AML code is > > referring to a device that we have suspended already, and since it's in a > > low power state, it just can't handle the reference. > > > > If that is the case, we'll have to find the device (that should be > > possible using some code instrumentation) and move the suspending of it > > into the late stage. > > Yes.
My own experimentation (in device_suspend(), calling _PTS() in the AML after each suspend_device() runs, until one device causes it to hang) points to ohci_hcd being the culprit here (with or without any devices attached). With the ohci_hcd module unloaded, the machine suspends just fine[1].
Of course, I'm at a complete loss as to why suspending OHCI would cause a problem for an IO port write.
> NOTE! This following patch is just for discussion, and while I think it's > conceptually a good thing to try, I don't think it will help Carlos' > problem. But removing the "pci_set_power_state()" in agp_nvidia_suspend() > might.
nvidia-agp cannot be built on x86-64, so it's not the culprit in this case.
-Carlos
[1] And yes, I double checked the custom DSDT is not loaded this time. -- E-Mail: carlos@strangeworlds.co.uk Web: strangeworlds.co.uk GPG Key ID: 0x23EE722D
| |