lkml.org 
[lkml]   [2007]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 55/63] ide-cd: merge cdrom_start_read_continuation() and cdrom_start_rw_cont()
Date

* Add handling of write requests to cdrom_start_read_continuation(),
rename it to cdrom_start_rw_cont() and remove no longer needed
cdrom_start_write_cont().

* Remove redundant '(rq->sector & (sectors_per_frame - 1)' check.

There should be no functionality changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
-51 bytes
drivers/ide/ide-cd.c | 74 ++++++++++++++++++++++++---------------------------
1 file changed, 35 insertions(+), 39 deletions(-)

Index: b/drivers/ide/ide-cd.c
===================================================================
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -800,39 +800,48 @@ static int cdrom_read_from_buffer (ide_d
static ide_startstop_t cdrom_rw_intr(ide_drive_t *);

/*
- * Routine to send a read packet command to the drive.
- * This is usually called directly from cdrom_start_read.
+ * Routine to send a read/write packet command to the drive.
+ * This is usually called directly from cdrom_start_{read,write}().
* However, for drq_interrupt devices, it is called from an interrupt
* when the drive is ready to accept the command.
*/
-static ide_startstop_t cdrom_start_read_continuation (ide_drive_t *drive)
+static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
{
struct request *rq = HWGROUP(drive)->rq;
- unsigned short sectors_per_frame;
- int nskip;

- sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS;
+ if (rq_data_dir(rq) == READ) {
+ unsigned short sectors_per_frame =
+ queue_hardsect_size(drive->queue) >> SECTOR_BITS;
+ int nskip = rq->sector & (sectors_per_frame - 1);

- /* If the requested sector doesn't start on a cdrom block boundary,
- we must adjust the start of the transfer so that it does,
- and remember to skip the first few sectors.
- If the CURRENT_NR_SECTORS field is larger than the size
- of the buffer, it will mean that we're to skip a number
- of sectors equal to the amount by which CURRENT_NR_SECTORS
- is larger than the buffer size. */
- nskip = rq->sector & (sectors_per_frame - 1);
- if (nskip > 0) {
- /* Sanity check... */
- if (rq->current_nr_sectors != bio_cur_sectors(rq->bio) &&
- (rq->sector & (sectors_per_frame - 1))) {
- printk(KERN_ERR "%s: cdrom_start_read_continuation: buffer botch (%u)\n",
- drive->name, rq->current_nr_sectors);
- cdrom_end_request(drive, 0);
- return ide_stopped;
+ /*
+ * If the requested sector doesn't start on a frame boundary,
+ * we must adjust the start of the transfer so that it does,
+ * and remember to skip the first few sectors.
+ *
+ * If the rq->current_nr_sectors field is larger than the size
+ * of the buffer, it will mean that we're to skip a number of
+ * sectors equal to the amount by which rq->current_nr_sectors
+ * is larger than the buffer size.
+ */
+ if (nskip > 0) {
+ /* Sanity check... */
+ if (rq->current_nr_sectors !=
+ bio_cur_sectors(rq->bio)) {
+ printk(KERN_ERR "%s: %s: buffer botch (%u)\n",
+ drive->name, __FUNCTION__,
+ rq->current_nr_sectors);
+ cdrom_end_request(drive, 0);
+ return ide_stopped;
+ }
+ rq->current_nr_sectors += nskip;
}
- rq->current_nr_sectors += nskip;
}
-
+#if 0
+ else
+ /* the immediate bit */
+ rq->cmd[1] = 1 << 3;
+#endif
/* Set up the command */
rq->timeout = ATAPI_WAIT_PC;

@@ -840,7 +849,6 @@ static ide_startstop_t cdrom_start_read_
return cdrom_transfer_packet_command(drive, rq, cdrom_rw_intr);
}

-
#define IDECD_SEEK_THRESHOLD (1000) /* 1000 blocks */
#define IDECD_SEEK_TIMER (5 * WAIT_MIN_SLEEP) /* 100 ms */
#define IDECD_SEEK_TIMEOUT (2 * WAIT_CMD) /* 20 sec */
@@ -939,7 +947,7 @@ static ide_startstop_t cdrom_start_read
info->dma = 0;

/* Start sending the read request to the drive. */
- return cdrom_start_packet_command(drive, 32768, cdrom_start_read_continuation);
+ return cdrom_start_packet_command(drive, 32768, cdrom_start_rw_cont);
}

/****************************************************************************
@@ -1360,18 +1368,6 @@ static ide_startstop_t cdrom_rw_intr(ide
return ide_started;
}

-static ide_startstop_t cdrom_start_write_cont(ide_drive_t *drive)
-{
- struct request *rq = HWGROUP(drive)->rq;
-
-#if 0 /* the immediate bit */
- rq->cmd[1] = 1 << 3;
-#endif
- rq->timeout = ATAPI_WAIT_PC;
-
- return cdrom_transfer_packet_command(drive, rq, cdrom_rw_intr);
-}
-
static ide_startstop_t cdrom_start_write(ide_drive_t *drive, struct request *rq)
{
struct cdrom_info *info = drive->driver_data;
@@ -1404,7 +1400,7 @@ static ide_startstop_t cdrom_start_write
info->devinfo.media_written = 1;

/* Start sending the write request to the drive. */
- return cdrom_start_packet_command(drive, 32768, cdrom_start_write_cont);
+ return cdrom_start_packet_command(drive, 32768, cdrom_start_rw_cont);
}

static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive)

\
 
 \ /
  Last update: 2007-12-20 02:51    [W:0.026 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site