lkml.org 
[lkml]   [2007]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] [RFC] be more verbose when probing EDD
Hello!

i`m sysadmin for quite some time and while being that, i have come across the one or another system, which refused to boot a linux kernel. typical symptom i have seen is a blinking cursor in the upper left just after kernel/initrd were loaded.

i never spent much time on that and either choose another system for linux or choose "failsafe" option, if the installer of my favourite distro gave that option.

since a colleague of mine was hit by that problem some weeks ago and i also came across that again recently, i started to investigate deeper and found, that EDD Bios probe is the problem here.

i found more than a handful of references on the net where people report similar problems. many discussion threads contained that typical smattering babble and seldom somebody gave that essential hint "try edd=off" for which i`m sure it would have helped many times.

that`s why i started to spend some thoughts on this how to make this easier/better for the user.

so

- it seems there are buggy Bios implementations out there which have problems with EDD
- your favourite distro may have set CONFIG_EDD=y|m , so EDD probe is on by default quite often nowadays.
- setting "edd=off" when you get that hang on boot is _not_ obvious.
- adressing this issue may be a little bit late, since i have mostly seen that problem on older machines, but not on recently bought
- i have at least two different systems with different types of chipsets to demonstrate this

on one of those, i added some printf`s to edd.c and this routine seems to be problematic and never returns

/* Extended Get Device Parameters */

ei->params.length = sizeof(ei->params);
ax = 0x4800;
dx = devno;
asm("pushfl; int $0x13; popfl"
: "+a" (ax), "+d" (dx), "=m" (ei->params)
: "S" (&ei->params)
: "ebx", "ecx", "edi");

i had a short conversation with matt domsch and hpa, who both think that additional printf`s would be an easy solution and not too bad to be added.

here is a quick and dirty initial patch from me:

--- linux-2.6.23/arch/x86/boot/main.c.orig 2007-12-09 11:40:24.315346712 +0100
+++ linux-2.6.23/arch/x86/boot/main.c 2007-12-09 16:11:43.644512504 +0100
@@ -152,7 +152,10 @@

/* Query EDD information */
#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
- query_edd();
+ printf("Probing EDD (query Bios for boot-device information)\n");
+ printf("If boot hangs here, you may have a buggy Bios. Try edd=skipmbr or edd=off");
+ query_edd();
+ printf("\rOK \n");
#endif
/* Do the last things and invoke protected mode */
go_to_protected_mode();

ok, fore sure it`s better to do that stuff in query_edd() itself, but before making a better version, i`d like to discuss if such patch would get accepted at all and if it`s a valid approach to let the kernel print some line which get`s overwritten ("\rOK + lot`s of whitespaces") milliseconds later on successful function return.

regards
roland

______________________________________________________________________________
Jetzt neu! Im riesigen WEB.DE Club SmartDrive Dateien freigeben und mit
Freunden teilen! http://www.freemail.web.de/club/smartdrive_ttc.htm/?mc=021134


\
 
 \ /
  Last update: 2007-12-16 16:37    [W:0.636 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site