lkml.org 
[lkml]   [2007]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] x86_64: fix problems due to use of "outb" to port 80 on some AMD64x2 laptops, etc.

* Rene Herman <rene.herman@gmail.com> wrote:

>>> /*
>>> - * This should be approx 2 Bo*oMips to start (note initial shift), and will
>>> - * still work even if initially too large, it will just take slightly longer
>>> + * Initial value roughly corresponds to a 1 GHz CPU
>>> */
>>> -unsigned long loops_per_jiffy = (1<<12);
>>> +unsigned long loops_per_jiffy = 1000000000 / HZ;
>>>
>>> EXPORT_SYMBOL(loops_per_jiffy);
>>
>> this is a factor of ~2400 increase - this will take an eternity to boot on
>> any older CPU.
>
> Only any outb_p's used before loops_per_jiffy is calibrated are
> affected.

yes - but there are a couple of early udelays, which would thus be
affected.

> This pre-calibation thing is what's historically held this change back
> (it's been discussed dozens of times before). At 4096, not any machine
> is going to have an appreciable delay before calibration when
> switching from the outb to 0x80.

i dont think this should matter: old systems that truly _need_ the ISA
delay will be slow enough to not trip up. (nor are they really affected
by these early delays - the delays were more for crappy ISA devices that
get initialized later down, when the delay loop is already calibrated)

modern systems learned to depend on the PCI write posting side-effects
of port 0x80 activities - those wont be helped by this initialization
change either. That is a far more serious concern.

Ingo


\
 
 \ /
  Last update: 2007-12-14 15:49    [W:2.168 / U:1.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site