lkml.org 
[lkml]   [2007]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: sata NCQ blacklist entry
    Date
    Am Freitag 23 November 2007 08:21:09 schrieb Andrew Morton:
    > On Tue, 13 Nov 2007 21:55:15 +0100 Jan-Simon M__ller <dl9pf@gmx.de> wrote:
    > > Hi!
    >
    > You removed from cc the guys who are most likely to fix this. Please
    > always do reply-to-all.
    Sri, will remember that.
    >
    > > Just using kernel 2.6.24-rc2 (325d22df7b19e0116aff3391d3a03f73d0634ded).
    > >
    >
    > So is this problem (which in another email you attributed to smartd)
    Even without smartd in my default runlevel it happens at some point.

    > also
    > present in 2.6.23?
    I compiled and tested 2.6.23.8. Smartd enabled, nothing noticed, dmesg is
    really clean:
    dmesg | grep ata
    ACPI: SSDT 7F6D3C3F, 02DD (r1 SataRe SataAhci 1000 INTL 20060912)
    PERCPU: Allocating 46888 bytes of per cpu data
    Memory: 2042960k/2087744k available (2062k kernel code, 44396k reserved, 982k
    data, 324k init)
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    libata version 2.21 loaded.
    ata1: SATA max UDMA/133 cmd 0xffffc2000034e100 ctl 0x0000000000000000 bmdma
    0x0000000000000000 irq 4347
    ata2: SATA max UDMA/133 cmd 0xffffc2000034e180 ctl 0x0000000000000000 bmdma
    0x0000000000000000 irq 4347
    ata3: SATA max UDMA/133 cmd 0xffffc2000034e200 ctl 0x0000000000000000 bmdma
    0x0000000000000000 irq 4347
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133
    ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/133
    ata2: SATA link down (SStatus 0 SControl 300)
    ata3: SATA link down (SStatus 0 SControl 300)
    ata_piix 0000:00:1f.1: version 2.12
    scsi3 : ata_piix
    scsi4 : ata_piix
    ata4: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma
    0x0000000000011810 irq 14
    ata5: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma
    0x0000000000011818 irq 15
    ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WW01, max UDMA/33
    ata4.00: configured for UDMA/33
    EXT3-fs: mounted filesystem with ordered data mode.



    >
    > And is is still present in 2.6.24-rc3?
    Went back to 2.6.24-rc3 ...
    Yes, but not at boot when smartd is started.

    dmesg | grep ata
    ACPI: SSDT 7F6D3C3F, 02DD (r1 SataRe SataAhci 1000 INTL 20060912)
    PERCPU: Allocating 46968 bytes of per cpu data
    Memory: 2048732k/2087744k available (2219k kernel code, 38624k reserved, 992k
    data, 344k init)
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    libata version 3.00 loaded.
    ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 4347
    ata2: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 4347
    ata3: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404200 irq 4347
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133
    ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/133
    ata2: SATA link down (SStatus 0 SControl 300)
    ata3: SATA link down (SStatus 0 SControl 300)
    ata_piix 0000:00:1f.1: version 2.12
    scsi3 : ata_piix
    scsi4 : ata_piix
    ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
    ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
    ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WW01, max UDMA/33
    ata4.00: configured for UDMA/33
    EXT3-fs: mounted filesystem with ordered data mode.
    ata1.00: exception Emask 0x2 SAct 0x73 SErr 0x0 action 0x2 frozen
    ata1.00: spurious completions during NCQ issue=0x0 SAct=0x73
    FIS=004040a1:00000008
    ata1.00: cmd 60/10:00:d4:82:31/00:00:07:00:00/40 tag 0 cdb 0x0 data 8192 in
    ata1.00: status: { DRDY }
    ata1.00: cmd 60/08:08:9c:e5:cc/00:00:08:00:00/40 tag 1 cdb 0x0 data 4096 in
    ata1.00: status: { DRDY }
    ata1.00: cmd 60/10:20:24:61:25/00:00:09:00:00/40 tag 4 cdb 0x0 data 8192 in
    ata1.00: status: { DRDY }
    ata1.00: cmd 60/58:28:c4:65:25/00:00:09:00:00/40 tag 5 cdb 0x0 data 45056 in
    ata1.00: status: { DRDY }
    ata1.00: cmd 60/20:30:7c:f6:a3/00:00:05:00:00/40 tag 6 cdb 0x0 data 16384 in
    ata1.00: status: { DRDY }
    ata1: soft resetting link
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: configured for UDMA/133
    ata1: EH complete
    ata1.00: exception Emask 0x2 SAct 0x187 SErr 0x0 action 0x2 frozen
    ata1.00: spurious completions during NCQ issue=0x0 SAct=0x187
    FIS=004040a1:00000040
    ata1.00: cmd 60/08:00:ec:af:10/00:00:04:00:00/40 tag 0 cdb 0x0 data 4096 in
    ata1.00: status: { DRDY }
    ata1.00: cmd 60/10:08:8c:e6:d8/00:00:04:00:00/40 tag 1 cdb 0x0 data 8192 in
    ata1.00: status: { DRDY }
    ata1.00: cmd 60/20:10:24:1a:da/00:00:04:00:00/40 tag 2 cdb 0x0 data 16384 in
    ata1.00: status: { DRDY }
    ata1.00: cmd 61/01:38:15:b3:30/00:00:07:00:00/40 tag 7 cdb 0x0 data 512 out
    ata1.00: status: { DRDY }
    ata1.00: cmd 61/10:40:1c:b3:30/00:00:07:00:00/40 tag 8 cdb 0x0 data 8192 out
    ata1.00: status: { DRDY }
    ata1: soft resetting link
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: configured for UDMA/133
    ata1: EH complete


    Thanks !
    Best regards,
    Jan-Simon
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2007-11-24 00:53    [W:0.029 / U:32.224 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site