lkml.org 
[lkml]   [2007]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 9/9] MN10300: Fix MTD JEDEC probe so that the ASB2303 bootprom can be detected [2.6.24-rc3-mm1]
Date
Fix MTD JEDEC probe so that the ASB2303 bootprom can be accessed.  This is
presumably required because the bootprom is normally write-protected and so
the normal flash probes don't work as they require the ability to write to the
flash to send it commands.

In the condition of the excluded if-statement, uaddr is 1.

Signed-off-by: David Howells <dhowells@redhat.com>
---

drivers/mtd/chips/jedec_probe.c | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index 5074b5e..01a0550 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -1883,11 +1883,18 @@ static inline __u8 finfo_uaddr(const struct amd_flash_info *finfo, int device_ty

uaddr = finfo->uaddr[uaddr_idx];

+ /* the MN10300 ASB2303 board doesn't detect its bootprom if this test
+ * is allowed to take place, presumably because the flash is
+ * write-protected and so cannot be commanded for the purposes of
+ * probing
+ */
+#ifndef CONFIG_MN10300_UNIT_ASB2303
if (uaddr != MTD_UADDR_NOT_SUPPORTED ) {
/* ASSERT("The unlock addresses for non-8-bit mode
are bollocks. We don't really need an array."); */
uaddr = finfo->uaddr[0];
}
+#endif

uaddr_done:
return uaddr;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-11-21 17:23    [W:0.039 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site