Messages in this thread | | | From | Nick Warne <> | Subject | Re: sb live (emu10k1) stops working between 2.6.23.1 and 2.6.23.7 | Date | Sun, 18 Nov 2007 09:41:41 +0000 |
| |
> I've done some more testing this morning, and it appears that the "ALSA: > emu10k1 - Fix memory corruption" patch from 2.6.23.6 has broken digital > output on my SB Live Value card. Simply replacing the 2.6.23.7 emumixer.c > with the version included in 2.6.23.1 I was able to get digital output > working again under 2.6.23.7.
Hi Jim,
Just to prove you are not alone, I also get the exactly the same issue:
lspci: 00:0f.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
log:
Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC). PCI: Found IRQ 5 for device 0000:00:0f.0 ALSA device list: #0: SBLive 5.1 [SB0060] (rev.7, serial:0x80611102) at 0xe000, irq 5
I use a restore file at boot, so run /sbin/alsactl restore
And updating this morning to 2.6.23.8 produces:
/usr/sbin/alsactl: set_control:991: warning: name mismatch (IEC958 Playback Mask/IEC958 Playback Default) for control #228 /usr/sbin/alsactl: set_control:993: warning: index mismatch (3/0) for control #228 /usr/sbin/alsactl: set_control:993: warning: index mismatch (0/1) for control #229 /usr/sbin/alsactl: set_control:993: warning: index mismatch (1/2) for control #230 /usr/sbin/alsactl: set_control:985: warning: iface mismatch (3/2) for control #231 /usr/sbin/alsactl: set_control:987: warning: device mismatch (2/0) for control #231 /usr/sbin/alsactl: set_control:989: warning: subdevice mismatch (0/0) for control #231 /usr/sbin/alsactl: set_control:991: warning: name mismatch (IEC958 Playback Default/SB Live Analog/Digital Output Jack) for control #231
Nick
> On Fri, 16 Nov 2007, Jim Faulkner wrote:
> > Hello, > > I have an SB Live Value card which uses the emu10k1 driver. I use digital > output to an external amplifier. This has worked fine for many years, up > to and including kernel 2.6.23.1. Under 2.6.23.7, I have been unable > to get any audio output. I get the following errors when loading my > asound.state under 2.6.23.7 using `alsactl restore`: > alsactl: set_control:991: warning: name mismatch (IEC958 Playback > Mask/IEC958 Playback Default) for control #222 > alsactl: set_control:993: warning: index mismatch (3/0) for control #222 > alsactl: set_control:993: warning: index mismatch (0/1) for control #223 > alsactl: set_control:993: warning: index mismatch (1/2) for control #224 > alsactl: set_control:985: warning: iface mismatch (3/2) for control #225 > alsactl: set_control:987: warning: device mismatch (2/0) for control #225 > alsactl: set_control:989: warning: subdevice mismatch (0/0) for control > #225 > alsactl: set_control:991: warning: name mismatch (IEC958 Playback > Default/SB Live Analog/Digital Output Jack) for control #225 > alsactl: set_control:993: warning: index mismatch (2/0) for control #225 > alsactl: set_control:995: failed to obtain info for control #225 > (Operation not permitted) > > I receive no errors when I load my asound.state under 2.6.23.1. -- Free Software Foundation Associate Member 5508 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |