lkml.org 
[lkml]   [2007]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: powernow-k8 and non-standard multipliers
Langsdorf, Mark wrote:
>
> The standard PowerNow! driver, by design, will stop
> working in this situation. I'm not going to support
> a driver that allows non-standard multipliers because
> it could cause a lot of hard to debug maintenance
> issues.

Just a follow-up to get this into the public record. I
discussed this with Mark privately and then did more
digging and established that in my particular case, the
problem was that the BIOS was hiding the p-state table
when a non-standard multiplier was used. So, I built
a custom DSDT that included the p-state table along
with an extra entry for my higher speed and now I've
happily got powernow support again.

--phil
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-11-15 08:57    [W:0.102 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site