Messages in this thread Patch in this message | | | From | Bartlomiej Zolnierkiewicz <> | Subject | Re: 2.6.24-rc2: Reported regressions from 2.6.23 (updated) | Date | Sun, 11 Nov 2007 23:22:15 +0100 |
| |
On Sunday 11 November 2007, Alan Cox wrote:
> > Subject : 2.6.24-rc1: pata_amd fails to detect 80-pin wire > > Submitter : "Thomas Lindroth" <thomas.lindroth@gmail.com> > > References : http://lkml.org/lkml/2007/11/7/152 > > http://bugzilla.kernel.org/show_bug.cgi?id=9322
http://lkml.org/lkml/2007/10/12/537
The regression itself has been foreseen a month ago and it is quite sad that it is still not fixed...
> Tejun is looking into this - its not trivial so may be 2.6.25 material. > Similar reports for some other controllers (notably VIA).
We may fix the regression in a bit different way for now and give Tejun some more time for the complete rework of the cable detection code.
[PATCH] pata_amd/pata_via: de-couple programming of PIO/MWDMA and UDMA timings
* Don't program UDMA timings when programming PIO or MWDMA modes.
This has also a nice side-effect of fixing regression added by commit 681c80b5d96076f447e8101ac4325c82d8dce508 ("libata: correct handling of SRST reset sequences") (->set_piomode method for PIO0 is called before ->cable_detect method which checks UDMA timings to get the cable type).
* Bump driver version.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> --- Untested, please don't merge until it is confirmed to fix the problem.
drivers/ata/pata_amd.c | 5 +++-- drivers/ata/pata_via.c | 4 ++-- 2 files changed, 5 insertions(+), 4 deletions(-)
Index: b/drivers/ata/pata_amd.c =================================================================== --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -25,7 +25,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_amd" -#define DRV_VERSION "0.3.9" +#define DRV_VERSION "0.3.10" /** * timing_setup - shared timing computation and load @@ -115,7 +115,8 @@ static void timing_setup(struct ata_port } /* UDMA timing */ - pci_write_config_byte(pdev, offset + 0x10 + (3 - dn), t); + if (at.udma) + pci_write_config_byte(pdev, offset + 0x10 + (3 - dn), t); } /** Index: b/drivers/ata/pata_via.c =================================================================== --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -63,7 +63,7 @@ #include <linux/dmi.h> #define DRV_NAME "pata_via" -#define DRV_VERSION "0.3.2" +#define DRV_VERSION "0.3.3" /* * The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx @@ -296,7 +296,7 @@ static void via_do_set_mode(struct ata_p } /* Set UDMA unless device is not UDMA capable */ - if (udma_type) { + if (udma_type && t.udma) { u8 cable80_status; /* Get 80-wire cable detection bit */ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |