[lkml]   [2007]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: Various problems on Axis 700 Lite VIA C7
    On Sat, 6 Oct 2007, Michael Tokarev wrote:

    > That to say - it may be some miscompilations, but may be some probs with
    > hardware itself. If you can, try to reproduce the same on another board
    > (I just tried to boot 2.6.23-rc5 on this machine, compiled for PIII CPU
    > using gcc-4.1.2 (no other version installed, sorry) - no issues so far).

    Hm, well, I could only compile a i686 kernel and Intel chipset with
    "otherwise the same" config with these two compiler options to test...
    Maybe some time. No, I do not have another C7 system.

    > And no, I'm not trying to say "don't use ViA C7" etc -- I just love this
    > my box, it's very good, powerful enouth and quiet. Just be prepared for
    > some... issues, which happens - rarely but still.

    Well, this very system has been running git and compiling kernels for
    itself the whole day today without a single issue. The gcc-3.3.5
    miscompiled kernel was compiled on another machine. So, I hope my specific
    sample is stable. And I need it to be stable, because I'm going to run my
    mail-server on it... BTW, compiled a tickless kernel on it, so far without
    looking into user-space after 12 min uptime 40290 timer interrupts, i.e.,
    17Hz, not bad.

    As for sensors - my system seems to have a w83627ehf chip, "sensors"
    output (under 2.6.22) looks pretty funny too:

    # sensors
    ERROR: Can't get adapter or algorithm?!?
    VCore: +0.98 V (min = +0.00 V, max = +1.74 V)
    in1: +12.41 V (min = +3.17 V, max = +9.24 V) ALARM
    AVCC: +3.26 V (min = +3.82 V, max = +1.79 V) ALARM
    3VCC: +3.26 V (min = +2.86 V, max = +1.49 V) ALARM
    in4: +1.54 V (min = +1.38 V, max = +1.46 V) ALARM
    in5: +1.59 V (min = +2.04 V, max = +0.95 V) ALARM
    in6: +4.71 V (min = +4.48 V, max = +3.05 V) ALARM
    VSB: +3.26 V (min = +4.08 V, max = +4.08 V) ALARM
    VBAT: +3.20 V (min = +3.57 V, max = +3.02 V) ALARM
    in9: +1.59 V (min = +2.04 V, max = +2.01 V) ALARM
    Case Fan: 0 RPM (min = 3668 RPM, div = 16) ALARM
    CPU Fan: 0 RPM (min = 4440 RPM, div = 16) ALARM
    Aux Fan: 0 RPM (min = 3125 RPM, div = 16) ALARM
    fan5: 0 RPM (min = 0 RPM, div = 8)
    Sys Temp: +39C (high = -6C, hyst = -2C) ALARM
    CPU Temp: +43.0C (high = +100.0C, hyst = +95.0C)
    AUX Temp: +42.5C (high = +100.0C, hyst = +95.0C)

    Maybe at least CPU Temp. at least correlates with the real value:-) Yes,
    I'll look in BIOS next time I boot with a connected monitor and a

    Thanks for the info!
    Guennadi Liakhovetski
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2007-10-05 23:33    [W:0.023 / U:42.692 seconds]
    ©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site