lkml.org 
[lkml]   [2007]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 09/14] Blackfin SPI driver: Fix SPI driver to work with SPI flash ST25P16 on bf548
On 10/31/07, David Brownell <david-b@pacbell.net> wrote:
> On Wednesday 31 October 2007, Mike Frysinger wrote:
> > On 10/31/07, David Brownell <david-b@pacbell.net> wrote:
> > > (ISTR the M25P16 in $SUBJECT has two read commands, one of
> > > which is only usable at clock rates below 33 MHz or so, but
> > > most other commands can work above that speed just fine.)
> >
> > pretty much all SPI flashes have two read commands ("slow" and "fast"
> > as they're typically called).
>
> Not DataFlash.

doesnt it ? AT45DB642D says 0x0B is fast (up to 66mhz) while 0x03 (up to 33mhz)
-mike
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-10-31 20:19    [W:0.266 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site