lkml.org 
[lkml]   [2007]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: Resume problems
    Gabriel C wrote:
    > Rafael J. Wysocki wrote:
    >> On Tuesday, 23 October 2007 01:00, Gabriel C wrote:
    >>> Rafael J. Wysocki wrote:
    >>>> On Monday, 22 October 2007 18:15, Gabriel C wrote:
    >>>>> Hi all ,
    >>>>>
    >>>>> I'm running current git + aic7xxx suspend patch from http://bugzilla.kernel.org/show_bug.cgi?id=3062
    >>>>> on a Dell Precision WorkStation 530 MT SMP box ( HT enabled ).
    >>>>>
    >>>>> Suspend works fine but on resume I have some problems.
    >>>>> All CPU's but boot CPU won't come back , everything else seems fine.
    >>>> Can you please try to disable HT and suspend?
    >>> So only 'Hibernation' is enabled in kernel and HT disabled in BIOS ?
    >>>
    >>> If you mean that , sure I can try doing so.
    >> With suspend or hibernation enabled in the kernel, but with HT disabled in the
    >> BIOS.
    >
    > Ok trying in some minutes.

    Disabling HT does not make any difference , nor disabling / enabling only one Hibernation or Suspend in kernel and BIOS
    nor any combination of these.

    >
    >>> I also could disable Suspend to RAM completly from BIOS as well if you want.
    >> No, that rather won't work.
    >>
    >>>>> ...
    >>>>>
    >>>>> Oct 22 15:02:28 lara [ 49.618795] Enabling non-boot CPUs ...
    >>>>> Oct 22 15:02:28 lara [ 49.622211] PM: Adding info for No Bus:msr1
    >>>>> Oct 22 15:02:28 lara [ 49.622259] PM: Adding info for No Bus:cpu1
    >>>>> Oct 22 15:02:28 lara [ 49.622302] SMP alternatives: switching to SMP code
    >>>>> Oct 22 15:02:28 lara [ 49.623536] Booting processor 1/1 eip 3000
    >>>>> Oct 22 15:02:28 lara [ 54.638093] Not responding.
    >>>>> Oct 22 15:02:28 lara [ 54.638096] Inquiring remote APIC #1...
    >>>>> Oct 22 15:02:28 lara [ 54.638099] ... APIC #1 ID: failed
    >>>>> Oct 22 15:02:28 lara [ 54.638204] ... APIC #1 VERSION: failed
    >>>>> Oct 22 15:02:28 lara [ 54.638307] ... APIC #1 SPIV: failed
    >>>>> Oct 22 15:02:28 lara [ 54.638427] skipping cpu1, didn't come online
    >>>>> Oct 22 15:02:28 lara [ 54.638602] PM: Removing info for No Bus:msr1
    >>>>> Oct 22 15:02:28 lara [ 54.638643] PM: Removing info for No Bus:cpu1
    >>>>> Oct 22 15:02:28 lara [ 54.638678] Error taking CPU1 up: -5
    >>>>> Oct 22 15:02:28 lara [ 54.640908] PM: Adding info for No Bus:msr2
    >>>>> Oct 22 15:02:28 lara [ 54.640939] PM: Adding info for No Bus:cpu2
    >>>>> Oct 22 15:02:28 lara [ 54.640976] SMP alternatives: switching to SMP code
    >>>>> Oct 22 15:02:28 lara [ 54.641961] Booting processor 2/2 eip 3000
    >>>>> Oct 22 15:02:28 lara [ 59.656795] Not responding.
    >>>>> Oct 22 15:02:28 lara [ 59.656799] Inquiring remote APIC #2...
    >>>>> Oct 22 15:02:28 lara [ 59.656803] ... APIC #2 ID: failed
    >>>>> Oct 22 15:02:28 lara [ 59.656907] ... APIC #2 VERSION: failed
    >>>>> Oct 22 15:02:28 lara [ 59.657011] ... APIC #2 SPIV: failed
    >>>>> Oct 22 15:02:28 lara [ 59.657131] skipping cpu2, didn't come online
    >>>>> Oct 22 15:02:28 lara [ 59.657300] PM: Removing info for No Bus:msr2
    >>>>> Oct 22 15:02:28 lara [ 59.657343] PM: Removing info for No Bus:cpu2
    >>>>> Oct 22 15:02:28 lara [ 59.657379] Error taking CPU2 up: -5
    >>>>> Oct 22 15:02:28 lara [ 59.659605] PM: Adding info for No Bus:msr3
    >>>>> Oct 22 15:02:28 lara [ 59.659637] PM: Adding info for No Bus:cpu3
    >>>>> Oct 22 15:02:28 lara [ 59.659673] SMP alternatives: switching to SMP code
    >>>>> Oct 22 15:02:28 lara [ 59.660725] Booting processor 3/3 eip 3000
    >>>>> Oct 22 15:02:28 lara [ 64.675517] Not responding.
    >>>>> Oct 22 15:02:28 lara [ 64.675520] Inquiring remote APIC #3...
    >>>>> Oct 22 15:02:28 lara [ 64.675524] ... APIC #3 ID: failed
    >>>>> Oct 22 15:02:28 lara [ 64.675628] ... APIC #3 VERSION: failed
    >>>>> Oct 22 15:02:28 lara [ 64.675731] ... APIC #3 SPIV: failed
    >>>>> Oct 22 15:02:28 lara [ 64.675859] skipping cpu3, didn't come online
    >>>>> Oct 22 15:02:28 lara [ 64.676017] PM: Removing info for No Bus:msr3
    >>>>> Oct 22 15:02:28 lara [ 64.676059] PM: Removing info for No Bus:cpu3
    >>>>> Oct 22 15:02:28 lara [ 64.676092] Error taking CPU3 up: -5
    >>>>> Oct 22 15:02:28 lara [ 64.676326] evxfevnt-0079 [00] enable : System is already in ACPI mode
    >>>>>
    >>>>> ...
    >>>>>
    >>>>> After I've played with a lot boot options I found out booting with ' acpi=ht ' will make the CPU's work again but now
    >>>>> I have a problem on Suspend. Everything seems to just go down disks etc but the box itself is for some reason still on.
    >>>>> So I've tested reboot=<> options with no luck.
    >>>>> ( after waiting 5 minutes to be sure everything is really off I can just hit power button). On resume now everything is fine.
    >>>>>
    >>>>> I'm not really sure what is wrong here acpi/hibernation/cpu-hotplug or a mix of all so I'm CC'ing linux-acpi as well.
    >>>>> The only thing I noticed is the 'Breaking affinity for irq XX' on suspend without acpi=ht messages.
    >>>>>
    >>>>> I can't even tell whatever other kernel versions are working because aic7xxx driver didn't got suspend support till now
    >>>>> ( or at least never worked here ). I know suspend worked fine on windows with that box.
    >>>>>
    >>>>> There is my config and dmesg ( good and bad one ) :
    >>>>>
    >>>>>
    >>>>> http://194.231.229.228/suspend/acpi=ht_working_dmesg.txt
    >>>>> http://194.231.229.228/suspend/dmesg_broken_cpus_on_resume.txt
    >>>>> http://194.231.229.228/suspend/config
    >>>> Well, I think we have a problem with the CPU hotplug.
    >>>>
    >>>> Can you try to offline-online CPUs (without suspending) and see if that works?
    >>> Yes does work when I do it manually :
    >>>
    >>> [ 6687.595842] CPU 1 is now offline
    >>> [ 6687.711425] CPU 2 is now offline
    >>> [ 6687.819330] CPU 3 is now offline
    >>> [ 6687.819337] SMP alternatives: switching to UP code
    >>> [ 6702.109605] SMP alternatives: switching to SMP code
    >>> [ 6702.110634] Booting processor 1/1 eip 3000
    >>> [ 6702.122140] Initializing CPU#1
    >>> [ 6702.182045] Calibrating delay using timer specific routine.. 3989.26 BogoMIPS (lpj=1994633)
    >>> [ 6702.182063] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
    >>> [ 6702.182085] CPU: Trace cache: 12K uops, L1 D cache: 8K
    >>> [ 6702.182091] CPU: L2 cache: 512K
    >>> [ 6702.182096] CPU: Physical Processor ID: 0
    >>> [ 6702.182102] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
    >>> [ 6702.182118] Intel machine check architecture supported.
    >>> [ 6702.182130] Intel machine check reporting enabled on CPU#1.
    >>> [ 6702.182137] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
    >>> [ 6702.182143] CPU1: Thermal monitoring enabled
    >>> [ 6702.183563] CPU1: Intel(R) Xeon(TM) CPU 2.00GHz stepping 07
    >>> [ 6702.184488] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    >>> [ 6702.205500] Switched to high resolution mode on CPU 1
    >>> [ 6702.210400] SMP alternatives: switching to SMP code
    >>> [ 6702.212196] Booting processor 2/2 eip 3000
    >>> [ 6702.222693] Initializing CPU#2
    >>> [ 6702.282950] Calibrating delay using timer specific routine.. 3988.88 BogoMIPS (lpj=1994443)
    >>> [ 6702.282962] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
    >>> [ 6702.282974] CPU: Trace cache: 12K uops, L1 D cache: 8K
    >>> [ 6702.282977] CPU: L2 cache: 512K
    >>> [ 6702.282980] CPU: Physical Processor ID: 3
    >>> [ 6702.282983] CPU: After all inits, caps: 3febfbff 00000000 00000000 0000b080 00000000 00000000 00000000 00000000
    >>> [ 6702.282991] Intel machine check architecture supported.
    >>> [ 6702.282998] Intel machine check reporting enabled on CPU#2.
    >>> [ 6702.283001] CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
    >>> [ 6702.283005] CPU2: Thermal monitoring enabled
    >>> [ 6702.283300] CPU2: Intel(R) XEON(TM) CPU 2.00GHz stepping 04
    >>> [ 6702.284296] checking TSC synchronization [CPU#1 -> CPU#2]: passed.
    >>> [ 6702.305317] Switched to high resolution mode on CPU 2
    >>> [ 6702.312356] SMP alternatives: switching to SMP code
    >>> [ 6702.313995] Booting processor 3/3 eip 3000
    >>> [ 6702.324511] Initializing CPU#3
    >>> [ 6702.384864] Calibrating delay using timer specific routine.. 3988.87 BogoMIPS (lpj=1994438)
    >>> [ 6702.384875] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
    >>> [ 6702.384888] CPU: Trace cache: 12K uops, L1 D cache: 8K
    >>> [ 6702.384891] CPU: L2 cache: 512K
    >>> [ 6702.384894] CPU: Physical Processor ID: 3
    >>> [ 6702.384897] CPU: After all inits, caps: 3febfbff 00000000 00000000 0000b080 00000000 00000000 00000000 00000000
    >>> [ 6702.384905] Intel machine check architecture supported.
    >>> [ 6702.384912] Intel machine check reporting enabled on CPU#3.
    >>> [ 6702.384915] CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
    >>> [ 6702.384919] CPU3: Thermal monitoring enabled
    >>> [ 6702.385146] CPU3: Intel(R) XEON(TM) CPU 2.00GHz stepping 04
    >>> [ 6702.386252] checking TSC synchronization [CPU#1 -> CPU#3]: passed.
    >>> [ 6702.407259] Switched to high resolution mode on CPU 3
    >>>
    >>> ...
    >>>
    >>> done with :
    >>> for i in cpu1 cpu2 cpu3; do echo 0 >/sys/devices/system/cpu/$i/online; done
    >>>
    >>> for i in cpu1 cpu2 cpu3; do echo 1 >/sys/devices/system/cpu/$i/online; done
    >> Hm, well.
    >>
    >> Please apply the appended patch and then try:
    >
    > Ok will do right after I test with disabled HT
    >
    >> # echo 8 > /proc/sys/kernel/printk
    >> # echo 5 > /sys/power/pm_test_level
    >> # echo mem > /sys/power/state
    >> (should wait for approx. 3 sec. and return to the boot prompt)
    >> # echo 4 > /sys/power/pm_test_level
    >> # echo mem > /sys/power/state
    >> (should wait for approx. 3 sec. and return to the boot prompt)
    >> ...
    >> # echo 1 > /sys/power/pm_test_level
    >> # echo mem > /sys/power/state
    >> (should wait for approx. 3 sec. and return to the boot prompt)
    >>
    >> and see if you can reproduce the problem and for which test level.
    >>
    >> [Echoing 0 to /sys/power/pm_test_level restores the normal behavior.]

    Also box just froze on level 3 but I got a ACPI error at least which I didn't got in any other dmesg till now :
    ( also patch was tested with HT disabled and Suspend and Hibernation enabled in kernel and BIOS )

    ...

    Oct 23 01:51:05 lara [ 273.512374] PM: Removing info for No Bus:input0
    Oct 23 01:51:05 lara [ 274.545158] PM: Removing info for No Bus:mouse0
    Oct 23 01:51:05 lara [ 274.551435] PM: Removing info for No Bus:event1
    Oct 23 01:51:05 lara [ 274.559493] PM: Removing info for No Bus:input1
    Oct 23 01:53:06 lara [ 394.869468] ACPI Error (evevent-0303): No installed handler for fixed event [00000002] [20070126]

    ....

    ( I hard reseted after that )

    I try level 2 and 1 now I just wanted to let you know.

    >>
    >> Greetings,
    >> Rafael
    >>

    Gabriel
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2007-10-23 02:15    [W:0.043 / U:88.260 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site