lkml.org 
[lkml]   [2007]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v3] pcmcia: Convert io_req_t to use unsigned int
[PCMCIA] Convert some internal-only ioaddr_t to unsigned int

Convert the io_req_t members to unsigned int, to allow use on machines
with more than 16 bits worth of IO ports (i.e. secondary busses on
ppc64, etc).

There was only a couple of places in drivers where a change was needed. I
left printk formats alone (there are lots of %04x-style formats in there),
mostly to not change the format on the platforms that only have 16-bit
io addresses, but also because the padding doesn't really add all that
much value most of the time.

I found only one sprintf of an address, and upsized the string accordingly
(I doubt anyone will have anywhere near INT_MAX as irq value, but at
least there's room for it now).

Signed-off-by: Olof Johansson <olof@lixom.net>

---

On Sat, Sep 22, 2007 at 11:13:03AM +0200, Christoph Hellwig wrote:
> On Sat, Sep 22, 2007 at 12:25:51AM -0600, Matthew Wilcox wrote:
> > > What about the formatting and field widths ?
> > >
> > > ulong would probably be a lot saner than kio_addr_t and yet more type
> > > obfuscation.
> >
> > I don't think anyone uses ioports > 32bit. Certainly i386 takes an int
> > port as parameter to {in,out}[bwl] (and it really only uses 16-bits).
> > parisc uses 24 bits. I don't know what the various ppcs do, but pci
> > bars can only be 32-bit for ioports. So my opinion is that ioports
> > should be uint, not ulong.
>
> The kernel seems to mostly use int, sometimes uint. I never quite got
> why pcmcia had to have it's own strange typedef for them.

Ok, so let's switch to unsigned int. Only exception I made was to stick
to u_int in the struct itself to keep it common with the style in the
rest of it.

This also resulted in a much smaller diff, since I didn't have to change
any printk formats (see above about 0-padding).


-Olof


Index: k.org/drivers/char/pcmcia/cm4000_cs.c
===================================================================
--- k.org.orig/drivers/char/pcmcia/cm4000_cs.c
+++ k.org/drivers/char/pcmcia/cm4000_cs.c
@@ -308,7 +308,7 @@ static unsigned int calc_baudv(unsigned
return (wcrcf / wbrcf);
}

-static unsigned short io_read_num_rec_bytes(ioaddr_t iobase, unsigned short *s)
+static unsigned short io_read_num_rec_bytes(unsigned int iobase, unsigned short *s)
{
unsigned short tmp;

@@ -426,7 +426,7 @@ static struct card_fixup card_fixups[] =
static void set_cardparameter(struct cm4000_dev *dev)
{
int i;
- ioaddr_t iobase = dev->p_dev->io.BasePort1;
+ unsigned int iobase = dev->p_dev->io.BasePort1;
u_int8_t stopbits = 0x02; /* ISO default */

DEBUGP(3, dev, "-> set_cardparameter\n");
@@ -459,7 +459,7 @@ static int set_protocol(struct cm4000_de
unsigned short num_bytes_read;
unsigned char pts_reply[4];
ssize_t rc;
- ioaddr_t iobase = dev->p_dev->io.BasePort1;
+ unsigned int iobase = dev->p_dev->io.BasePort1;

rc = 0;

@@ -610,7 +610,7 @@ exit_setprotocol:
return rc;
}

-static int io_detect_cm4000(ioaddr_t iobase, struct cm4000_dev *dev)
+static int io_detect_cm4000(unsigned int iobase, struct cm4000_dev *dev)
{

/* note: statemachine is assumed to be reset */
@@ -671,7 +671,7 @@ static void terminate_monitor(struct cm4
static void monitor_card(unsigned long p)
{
struct cm4000_dev *dev = (struct cm4000_dev *) p;
- ioaddr_t iobase = dev->p_dev->io.BasePort1;
+ unsigned int iobase = dev->p_dev->io.BasePort1;
unsigned short s;
struct ptsreq ptsreq;
int i, atrc;
@@ -933,7 +933,7 @@ static ssize_t cmm_read(struct file *fil
loff_t *ppos)
{
struct cm4000_dev *dev = filp->private_data;
- ioaddr_t iobase = dev->p_dev->io.BasePort1;
+ unsigned int iobase = dev->p_dev->io.BasePort1;
ssize_t rc;
int i, j, k;

@@ -1054,7 +1054,7 @@ static ssize_t cmm_write(struct file *fi
size_t count, loff_t *ppos)
{
struct cm4000_dev *dev = (struct cm4000_dev *) filp->private_data;
- ioaddr_t iobase = dev->p_dev->io.BasePort1;
+ unsigned int iobase = dev->p_dev->io.BasePort1;
unsigned short s;
unsigned char tmp;
unsigned char infolen;
@@ -1408,7 +1408,7 @@ static int cmm_ioctl(struct inode *inode
unsigned long arg)
{
struct cm4000_dev *dev = filp->private_data;
- ioaddr_t iobase = dev->p_dev->io.BasePort1;
+ unsigned int iobase = dev->p_dev->io.BasePort1;
struct pcmcia_device *link;
int size;
int rc;
Index: k.org/drivers/pcmcia/pcmcia_resource.c
===================================================================
--- k.org.orig/drivers/pcmcia/pcmcia_resource.c
+++ k.org/drivers/pcmcia/pcmcia_resource.c
@@ -65,23 +65,23 @@ extern int ds_pc_debug;
* Special stuff for managing IO windows, because they are scarce
*/

-static int alloc_io_space(struct pcmcia_socket *s, u_int attr, ioaddr_t *base,
- ioaddr_t num, u_int lines)
+static int alloc_io_space(struct pcmcia_socket *s, u_int attr,
+ unsigned int *base, unsigned int num, u_int lines)
{
int i;
- kio_addr_t try, align;
+ unsigned int try, align;

align = (*base) ? (lines ? 1<<lines : 0) : 1;
if (align && (align < num)) {
if (*base) {
- ds_dbg(s, 0, "odd IO request: num %#x align %#lx\n",
+ ds_dbg(s, 0, "odd IO request: num %#x align %#x\n",
num, align);
align = 0;
} else
while (align && (align < num)) align <<= 1;
}
if (*base & ~(align-1)) {
- ds_dbg(s, 0, "odd IO request: base %#x align %#lx\n",
+ ds_dbg(s, 0, "odd IO request: base %#x align %#x\n",
*base, align);
align = 0;
}
@@ -132,8 +132,8 @@ static int alloc_io_space(struct pcmcia_
} /* alloc_io_space */


-static void release_io_space(struct pcmcia_socket *s, ioaddr_t base,
- ioaddr_t num)
+static void release_io_space(struct pcmcia_socket *s, unsigned int base,
+ unsigned int num)
{
int i;

Index: k.org/include/pcmcia/cs.h
===================================================================
--- k.org.orig/include/pcmcia/cs.h
+++ k.org/include/pcmcia/cs.h
@@ -147,11 +147,11 @@ typedef struct config_req_t {

/* For RequestIO and ReleaseIO */
typedef struct io_req_t {
- ioaddr_t BasePort1;
- ioaddr_t NumPorts1;
+ u_int BasePort1;
+ u_int NumPorts1;
u_int Attributes1;
- ioaddr_t BasePort2;
- ioaddr_t NumPorts2;
+ u_int BasePort2;
+ u_int NumPorts2;
u_int Attributes2;
u_int IOAddrLines;
} io_req_t;
Index: k.org/drivers/scsi/pcmcia/fdomain_stub.c
===================================================================
--- k.org.orig/drivers/scsi/pcmcia/fdomain_stub.c
+++ k.org/drivers/scsi/pcmcia/fdomain_stub.c
@@ -130,7 +130,7 @@ static int fdomain_config(struct pcmcia_
cisparse_t parse;
int i, last_ret, last_fn;
u_char tuple_data[64];
- char str[16];
+ char str[22];
struct Scsi_Host *host;

DEBUG(0, "fdomain_config(0x%p)\n", link);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2007-10-19 22:13    [W:0.074 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site