lkml.org 
[lkml]   [2007]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[ patch .24-rc0 0/5 ] SuperIO locks coordinator
this patchset (on hwmon-git) re-introduces superio_locks module, 
previously RFC'd here, where I 'borrowed' another thread..

http://marc.info/?l=linux-kernel&m=115821759424601&w=2

The module shares out slots/shared-reservations containing
a mutex, so that multiple modules can coordinate access to
the sio-port.

Im crossposting - LKML for more reviewers, lm-sensors for
folks with the hardware and (perhaps) more interest.

If its not too late, please consider for 2.6.24-rc0

01 - adds superio_locks module

User-drivers specify the sio-port characteristics they can support
device-ids, sio-port-addrs, enter & exit sequences, etc in
a struct superio_search (in __devinit, preferably).

superio_find() then searches existing slots/shared-reservations
for a matching sio-port, and returns it if found.
Otherwize it probes port-addrs, specified by find() user,
and makes and returns a new reservation.

superio_find() finds and reserves the slot,
returned as ptr or null
superio_release() relinguishes the slot (ref-counted)

Once theyve got the reservation in struct superio * gate
(as named in patches 2-5) they *may* use

superio_lock(gate)
superio_enter/exit(gate)
superio_inb/w(gate, regaddr),
superio_outb/w(gate, regaddr, val)

or they can do it themselves with inb/outb, by using gate->sioaddr, etc.

The API names (superio_find etc) were chosen to fit the idiom
used in hwmon/*.c, patches 2-5 remove the per-user-driver
copies of the superio_*() fns.

I added the module to /drivers/hwmon, mostly cuz thats where
Ive used it - perhaps drivers/isa is better ?


02 - use superio-locks in drivers/hwmon/w83627hf.c

tested on an AMD-Barton mobo.


03 - use superio-locks in drivers/hwmon/pc87360

this driver keeps the slot for only during __init, since it
only needs the sio-port to read the ISA addresses of the
Logical Devices in the chip, which are then used exclusively.


04 - use superio-locks in drivers/char/pc8736x_gpio

this driver keeps the slot for the lifetime of the driver
( __init til __exit ), since the driver needs the sio-port
to change pin configurations.

patches 03,04 were tested on a soekris 4801 a year ago,
the box is currently busy. Together they sanity-test
the sharing of a reservation with 2 different life-cycles.


05 - use superio-locks in rest of drivers/hwmon/*.c

this patch is compile-tested only, please review for sanity before you
try running them. Things to look for - missing superio_release(),
opportunities to use superio_devid(), superio_inw(), etc.


Driver sizes:
without/with DEBUG
2364 664 96 3124 c34 drivers/hwmon/superio_locks.ko
2938 664 96 3698 e72 drivers/hwmon/superio_locks.ko

effect on user-driver sizes:
before/after
12209 4004 36 16249 3f79 drivers/hwmon/pc87360.ko
12434 4068 36 16538 409a drivers/hwmon/pc87360.ko

I hope this is small enough; per the link, there apparently are
actual problems (not just theoretical) that this should help with.

OPERATION

The previous thread includes cut-paste from dmesg, from when
I tested on the soekris. No point in repasting here..

RANDOM POINTS/CAVEATS

- Ive not tested the 16-bit device-id check (no hardware)

- superio_(enter|exit) and superio(un)?lock are nearly redundant.
The former also sends the active/idle command sequences, with a tiny
overhead when none are needed (forex the pc87360 chip). One driver
in patch 5 needed a my_superio_enter() due to an odd unlock sequence.

- uses request_region - this might detect a 'rogue' sio-port user
(which requests region, but doesnt use this module).
It did detect a missing superio_release(), which I hacked around
with the paranoid mod-option (easier than rebooting)

- superio-locks.h has static-inline fns, probably not enough
code to do an export for, since >2 sio-ports is probably rare.

- superio_locks may be relevant elsewhere (ACPI ?)
but I havent thought about them, hwmon seemed like a good testcase.

- implements several defaults (byte-sized devid, ldn-addr=7,
devid-addr=20). Perhaps more are possible, as long as theres
an override. I avoided setting the defaults into struct superio_search,
so that it could be const'd.

Please identify those that are standard enough.
This could include #define LPC_* constants, for use in
superio_inb(gate, LPC_LDN), superio_inw(gate, LPC_ISA_ADDR)
then user drivers could just #define SIO_* for non-standard registers.

- Hans, I think Ive added all your suggestions, thanks.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
---


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-10-15 07:25    [W:0.030 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site