[lkml]   [2007]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [git patches] libata update
On 10/12/07, Jeff Garzik <> wrote:
> [ I just sent this upstream to Andrew and Linus ]
> * Turn on ACPI by default (watch for bug reports!). This should make
> suspend/resume work a lot better.

Bug report for 2.6.23-mm1:
scsi8 : pata_amd
scsi9 : pata_amd
ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index
(0FFFFFFFF) is beyond end of object [20070126]
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.IDE0.GTM_] (Node ffff810100318a20), AE_AML_PACKAGE_LIMIT
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.IDE0.CHN0._GTM] (Node ffff8101003187c0),
ata9: ACPI get timing mode failed (AE 0x300d)
ata9.01: ATA-7: Maxtor 6L250R0, BAH41G10, max UDMA/133
ata9.01: 490234752 sectors, multi 16: LBA48
ata9.01: limited to UDMA/33 due to 40-wire cable
ata9.01: configured for UDMA/33
ata10: port disabled. ignoring.

libata-Bug, ACPI-Bug or just bad code in the BIOS?
The detection of the 40-wire cable is correct, also that there is only
one drive at this IDE port.

pata_amd is build as module and is driving the IDE part of a nVidia MCP55.

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2007-10-14 12:37    [W:0.085 / U:5.488 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site