lkml.org 
[lkml]   [2007]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [-mm patch] drivers/pci/quirks.c: cleanup
Hi Jean, Adrian:

> On Tue, 19 Dec 2006 05:13:15 +0100, Adrian Bunk wrote:
> > @@ -1122,6 +1123,14 @@ static void quirk_sis_96x_smbus(struct p
> > pci_write_config_byte(dev, 0x77, val & ~0x10);
> > pci_read_config_byte(dev, 0x77, &val);
> > }
> > +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus );
> > +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus );
> > +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus );
> > +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus );
> > +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus );
> > +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus );
> > +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus );
> > +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus );
> >
> > /*
> > * ... This is further complicated by the fact that some SiS96x south
> > @@ -1158,6 +1167,8 @@ static void quirk_sis_503(struct pci_dev
> > */
> > dev->device = devid;
> > }
> > +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503 );
> > +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503 );

* Jean Delvare <khali@linux-fr.org> [2007-01-05 09:52:33 +0100]:
> Was this patch tested on the SiS-based boards which need these quirks?
> I think you broke them. If I remember correctly, quirk_sis_503() must
> be called before quirk_sis_96x_smbus() for some boards to work
> properly, and we currently rely on the linking order to guarantee that.
> Likewise, quirk_sis_96x_compatible() should be called before
> quirk_sis_503() otherwise the warning message in quirk_sis_503() will
> no longer be correct.
>
> So if you want to put the calls right after the quirk functions, you
> need to reorder the functions themselves as well. Feel free to add a
> comment explaining the order requirement so that nobody breaks it
> accidentally again in the future.

It is fragile for this code to depend on link order; Adrian's obvious and
trivial cleanups broke it. Not only that, but some FC kernels had/have the
link order reversed such that this quirk is broken anyway.

I sent a patch for this back in May:
http://lists.lm-sensors.org/pipermail/lm-sensors/2006-May/016113.html

There was some discussion on the linux-pci mailing list as well; can't seem to
find an archive of that though. Basically, it was not understood how the FC
kernels could have a reversed link order. I never followed up on it, my bad.

At any rate, can we please get the patch above applied? I will send a new one
if necessary.

Regards,

--
Mark M. Hoffman
mhoffman@lightlink.com

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-01-07 17:07    [W:0.113 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site