lkml.org 
[lkml]   [2007]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] hpt37x: Two important bug fixes
The HPT37x driver very carefully handles DMA completions and the needed
fixups are done on pci registers 0x50 and 0x52. This is unfortunate
because the actual registers are 0x50 and 0x54. Fixing this offset cures
the second channel problems reported.

Secondly there are some problems with the HPT370 and certain ATA drives.
The filter code however only filters ATAPI devices due to a
reversed type check.

Signed-off-by: Alan Cox <alan@redhat.com>


--- linux.vanilla-2.6.20-rc3/drivers/ata/pata_hpt37x.c 2007-01-01 21:43:27.000000000 +0000
+++ linux-2.6.20-rc3/drivers/ata/pata_hpt37x.c 2007-01-04 15:03:26.071994728 +0000
@@ -25,7 +25,7 @@
#include <linux/libata.h>

#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.5.1"
+#define DRV_VERSION "0.5.2"

struct hpt_clock {
u8 xfer_speed;
@@ -416,7 +416,7 @@

static unsigned long hpt370_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
{
- if (adev->class != ATA_DEV_ATA) {
+ if (adev->class == ATA_DEV_ATA) {
if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33))
mask &= ~ATA_MASK_UDMA;
if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
@@ -749,7 +749,7 @@
{
struct ata_port *ap = qc->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- int mscreg = 0x50 + 2 * ap->port_no;
+ int mscreg = 0x50 + 4 * ap->port_no;
u8 bwsr_stat, msc_stat;

pci_read_config_byte(pdev, 0x6A, &bwsr_stat);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2007-01-04 18:25    [W:0.079 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site