lkml.org 
[lkml]   [2007]   [Jan]   [4]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
DateThu, 04 Jan 2007 14:02:22 +0900
FromTejun Heo <>
SubjectRe: SATA problems
Pablo Sebastian Greco wrote:
> By crash I mean the whole system going down, having to reset the entire
> machine.
> I'm sending you 4 files:
> dmesg: current boot dmesg, just a boot, because no errors appeared after
> last crash, since the server is out of production right now (errors
> usually appear under heavy load, and this primarily a transparent proxy
> for about 1000 simultaneous users)
> lspci: the way you asked for it
> messages and messages.1: files where you can see old boots and crashes
> (even a soft lockup).
> If there is anything else I can do, let me know. If you need direct
> access to the server, I can arrange that too.

Can you try 2.6.20-rc3 and see if 'CLO not available' message goes away
(please post boot dmesg)?

The crash/lock is because filesystem code does not cope with IO errors
very well.  I can't tell why timeouts are occurring in the first place.
 It seems that only samsung drives are affected (sda2, 3, 4).  Hmmm...
Please apply the attached patch to 2.6.20-rc3 and test it.

Thanks.

-- 
tejun
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 0d51d13..f8cf349 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3327,6 +3327,8 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	/* NCQ is slow */
         { "WDC WD740ADFD-00",   NULL,		ATA_HORKAGE_NONCQ },
 
+	{ "SAMSUNG SP2504C",	NULL,		ATA_HORKAGE_NONCQ },
+
 	/* Devices with NCQ limits */
 
 	/* End Marker */
\
 
 \ /
  Last update: 2007-01-04 05:05    [W:0.985 / U:0.020 seconds]
©2003-2008 Jasper Spaans