[lkml]   [2007]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: 2.6.20-rc6-mm3
On Mon, Jan 29, 2007 at 08:45:28PM -0800, Andrew Morton wrote:
> Temporarily at
> Will appear later at

I jumped from rc2-mm1 to rc6-mm3 and tried dynticks for the first time:

Time: acpi_pm clocksource has been installed.
Clocksource tsc unstable (delta = -275154141 ns)
BUG: soft lockup detected on CPU#1!
[<c0104dac>] show_trace_log_lvl+0x1a/0x2f
[<c010540b>] show_trace+0x12/0x14
[<c010548f>] dump_stack+0x16/0x18
[<c0146e50>] softlockup_tick+0xa7/0xb6
[<c01286c0>] run_local_timers+0x12/0x14
[<c0128a61>] update_process_times+0x3e/0x63
[<c01374c5>] tick_nohz_handler+0x7d/0xe3
[<c01137c2>] smp_apic_timer_interrupt+0x71/0x83
[<c01048f4>] apic_timer_interrupt+0x28/0x30
[<c013709e>] tick_broadcast_oneshot_control+0x12/0xc8
[<c0136a58>] tick_notify+0x1cd/0x241
[<c012bd4e>] notifier_call_chain+0x2b/0x55
[<c012bde2>] __raw_notifier_call_chain+0x19/0x1e
[<c012be01>] raw_notifier_call_chain+0x1a/0x1c
[<c01364ea>] clockevents_do_notify+0x11/0x13
[<c013672d>] clockevents_notify+0x1c/0x53
[<f8f7b5cb>] acpi_state_timer_broadcast+0x2e/0x31 [processor]
[<f8f7c12f>] acpi_processor_idle+0x276/0x40b [processor]
[<c0102435>] cpu_idle+0xad/0xd3
[<c0112975>] start_secondary+0x32b/0x333
[<00000000>] run_init_process+0x3fefed10/0x19

Full dmesg and config:

As a side note the process becomes slower and slower as it proceeds,
it's definitely noticeable during my iptables rules setup (nothing that
complex, just default policies and subnet/lan accept rules).
Building with NO_HZ=n right now.

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2007-01-31 22:57    [W:0.386 / U:2.256 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site