lkml.org 
[lkml]   [2007]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject2.6.20-rc4: usb somehow broken
Date
Hi,

I can't scan anymore. :-( I don't know which rc kernel introduced it, but this
are the messages I get (w/o touching the device/usb cable except pluggin it
in for the first time):

usb 1-1.2: new full speed USB device using ehci_hcd and address 4
ehci_hcd 0000:00:0b.1: qh ffff81007bc6c280 (#00) state 4
usb 1-1.2: configuration #1 chosen from 1 choice
usb 1-1.2: USB disconnect, address 4
usb 1-1.2: new full speed USB device using ehci_hcd and address 5
usb 1-1.2: configuration #1 chosen from 1 choice
usb 1-1.2: USB disconnect, address 5
usb 1-1.2: new full speed USB device using ehci_hcd and address 6
usb 1-1.2: configuration #1 chosen from 1 choice
usb 1-1.2: USB disconnect, address 6
usb 1-1.2: new full speed USB device using ehci_hcd and address 7
usb 1-1.2: configuration #1 chosen from 1 choice
usb 1-1.2: USB disconnect, address 7
usb 1-1.2: new full speed USB device using ehci_hcd and address 8
usb 1-1.2: configuration #1 chosen from 1 choice


Shouldn't the ohci module handle the scanner? The scanner is connected through
a hub.

I don't remember how 2.6.19 handled it, or whether I used some new exotic
setting which causes the breakage.

Well, I'll test this week-end and upload more infos then. If you already have
some ideas in the meantime, let me know.

BTW, a usb2.0 card reader (connected through the same hub) works w/o
problems...
--
(°= =°)
//\ Prakash Punnoor /\\
V_/ \_V
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2007-01-11 18:59    [W:0.077 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site